Contact me

Thursday, May 04, 2017

Christmas cards with handmade paper trees & sequins

I am behind on getting Christmas cards done monthly this year.  These are technically my March cards!!
I started with some handmade paper triangles which I created a long while back when I was regularly making handmade paper.  I created them on a spare screen sitting on my mould and used a baster to add the paper pulp which allowed me to include a lot of texture.  I chose to let them dry naturally which preserved all the details I had created instead of couching them.  They were needing a bit of touch up in colour so I colourwashed them with green acrylic paint and I dried them with my heat gun.  Worked very well!!
I added a garland using various fibers and stitching and used sequins to simulate ornaments.  They are all different but I generally used the same sketch which worked well with the size of the "tree".
For this one I used red rick rack which I positioned with glue dots and a few dots of white glue in strategic locations.  I added large gold sequins using glue dots and overlapped them over the rick rack garlans.  I adhered the tree to the background paper and added the gold star brad.  I adhered this large element to a red card front and added a laser printed layered punchie greeting on the top right hand corner.

For the one on the left I added white fiber for the garland gluing the ends to the back.  I added iridescent white sequins with glue dots.  I glued my tree to a white shimmery embossed background then added a white snowflake brad at the top.  I tucked a laser printed greeting just behind the tree and embellished a clear iridescent sequin which I applied with a partial glue dot.  This large element was mounted to a deep plum card front.
For this one I used shiny thread and some copper blending filament in my sewing machine.  I cut a length of each and wound them onto an empty spool so I could feed them into my needle at the same time.  It worked well though I was going very slow because I was incorporating the sequins as I went.  I started at the lower right hand of the tree and started my stitching.  Next, I positioned a sequin and manually adjusted the machine to stitch just before the sequin, in the middle of the sequin and just past the sequin. I continued to stitch in a zig zag pattern up the tree adding sequins (large blue, gold and copper) in the same manner.  I returned to the bottom in the same manner but did not add any sequins on the way down.  I really like the look of the blending filament and the shiny thread!!  I glued the tree to my decorative paper and added a gold brad at the top.  This one was coloured with a gold paint marker to coordinate.  I added a laser printed layered punchie greeting to finish off my layer and glued this large element to a rust card.

For this one, I stitched a garland with white shiny thread using a long zig zag stitch.  The tension was off a bit with the top thread being a bit tight so the zigzag is not as apparent as I was expecting.  I added four small fiber snowflakes using iridescent glitter glue then added dots along the garland as well.  While they were drying I layered my decorative paper over a snowflake punched border and glued this layer to a dark green card front.  I glued my tree to the decorative paper and added an iridescent snowflake charm to the top of the tree using a glue dot.  I added a simple laser printed punchie greeting to the top left.  It still needed a bit of something so I added a dot of  iridescent glitter glue to the centers of each snowflake in the border and I like that much better.





For this one, I added a garland using silver cording gluing the ends to the back.   I added tiny silver and blue sequins using partial glue dots in a bit of a random pattern.  I glued the tree to my soft blue floral background then added a silver star sequin using a silver brad.  I glued this large element to a blue card front.  I layered a laser printed oval greeting which I had sponged with a bit of green ink over a scalloped oval of blue cardstock.

It was great to use up these little trees and get some Christmas cards made!!  I have a few more ideas so hopefully this month I will get caught up.

Therese






Doodle sticker on an embossed background with ribbon flags


Another card using a sticker from my doodle coloring books!!  This one is from the Butterfly Garden book.  I coloured it with watercolour pencils and then applied water over them with a round brush.  It is a different look than applying colour with a brush.  It is certainly easier to fill in the small spaces with a pencil crayon.  I applied this sticker to white cardstock so the border disappears significantly which works out alright.  I manually embossed the background after applying the sticker.  That was not the plan but when I gently laid it on the surface to mark off the borders I was not able to remove it so I just went with it.  I sponged the outer edge with a bit of warm blue ink and then machine stitched on some ribbon flags with white thread on the right hand side.  I like the polka dot ribbons!!  I added a layered punchie greeting just below the butterfly.  Thinking it needed a bit of something, I added little rhinestones to some of the dots on the butterfly and also a little red heart rhinestone to the body.  Adds dimension along with the ribbon.    Therese