Contact me

Sunday, July 15, 2018

Large cards from my sister's stash!!


My sister visited a few years ago and left a bit of her stash behind so I have been making cards for her when I get a chance.  Knowing that I would be seeing her I set about making a few cards for her.  I have been enjoying these large format cards - 5.5" x 8.5".  


For the first card I started with some large images which I printed when I was working on another project.  I usually fill a half sheet of images or greetings while I am at it when I am colour printing.  This little bear with the balloon (Pixabay) is one of my favorites from La Petite Femme on Pixabay!!  I started with a red card and mounted a fun scrapbooking paper to it.  I added a strip of brown cardstock about a third down from the top.  I added  short pieces of coordinating ribbon to the back of the image and added a line of faux stitching before mounting it to a dark red layer and adhering to my card front using 3D foam tape.  The colour printed greeting I found in my stash and was just what I needed.  I trimmed it, layered it onto brown and flagged the right hand side.  I mounted it below the image to the left hand side of the card.  Love it!!
For the next card I used a dark pink card and mounted this fun background paper to it after cutting it twice to made four different sized pieces.  I added a length of pink polka dotted ribbon about one third down using double sided tape to keep it in place.  I layered the colour printed balloons (CLKER) onto yellow cardstock, trimmed it and mounted it over the ribbon on the the top of the card using 3D foam tape.  I added another length of the ribbon to the lower portion and mounted the laser printed greeting which I had also mounted to yellow cardstock over it!!  A fun birthday card!!

For the next card I started with a light pink card and mounted to it some beautiful shimmery pink embossed decorative paper.  I found the two halves of a paper doily in my stash and cut out the centers with a doily thinlit die (SX).  I embossed the dark pink layer for my rose image (CLKER) using a lace border die (SU) on top and bottom and fussy cut the edges.  I mounted the lace doily pieces to the back of this piece using double sided tape.  I inserted the lace between the paper doily and the rose layer before mounting this large element to my card front.  I adhered the ends of the lace to the inside of the card using double sided tape and added the laser printed greeting to the rose image to finish of my card.  Thinking it still needed " a bit of something" I added two clear rhinestones to either side of the greeting.  Done!!
For my next card I started with an off white card and mounted a layer of this fun striped scrapbook paper which I had backed with a layer of brown cardstock.  I layered the colour printed image of the brown coffee cup with blue cardstock and mounted on the top portion of my card.  I layered the laser printed greeting with the same blue cardstock and adhered it below the cup image using 3D foam tape as well.  Thinking it needed a bit of something I stamped and embossed with clear embossing powder a little coffee bean from one of my stamp sets.  I fussy cut it  and mounted it to my greeting!!  Much better!!
For my next two cards I used that same little bear image from Pixabay - la petite femme!!   For the first one I created a card using red and black embossed cardstock by just taping together the pieces I needed.  I added a strip of shimmery pink embossed paper which I flagged on the left hand side.  I added the laser printed digital image of the little bear with a balloon onto the red section of the card and added the laser printed chalkboard greeting overlapping the image and the pink strip.  Love how it worked out. 
Very pleased with how the first one turned out I decided to use the same colour scheme for my second one!  The triangle is what I had trimmed off the black layer for my first card so I mounted it to the top of a red card so it would highlight the greeting.  I used a polka dot border embossing folder to emboss a strip of dots on my card front before adding my bear image and the chalkboard greeting.  Love this one too!!
So a few cards for my sister made in one afternoon of creating!!                 Therese


Birthday card with a heart, some fun ribbon and a collage image

My sister has a birthday this coming week and being as I saw her this week I gave her her birthday card a few days early!!  I was great to see her and the rest of my sister were there as well at the funeral this week. 
I started with this large red top note die cut which had a heart die cut out of it.  I added a little texture by manually embossing it with a large polka dot embossing folder.  I tied on a black ribbon between the opening and the edge of the top note using knitting ribbon and a double knot.  I went looking in my image stash for something appropriate for mounting behind it and found this collage stamped image that has been there for a long time!!  Perfect and large enough that I could choose what I wanted to show through.  I mounted it with double sided tape behind the opening and trimmed off the sides. I found the vellum greeting in my greeting stash and it was perfect!! I folded the two ends over the edge of the top note and adhered them with double sided tape.  I mounted this large element to the front of a soft blue card onto which I had already adhered a colour printed background (Melstampz) trimmed to fit with an even border all the way around using double sided tape.  It still needed " a bit of something" so I paper piereced all the way around the edge of the heart opening using a push pin.  That was better!!!  Wishing her a great birthday tomorrow!!!!!!!!              Therese

Tim Holtz wildflower dies and some hand decorated paper for this sympathy card

My uncle passed away last week and the funeral was this week.  I started with the hand decorated background which was created using watercolour and plastic wrap.  The soft colours were just right for this sympathy card.   I ripped the background in two and die cut the top portion using my new TH Wildflower thinlit dies.  I reassembled the pieces on a dark green layer and then mounted the large element to an off white card.  I added a layered greeting.  I used a laser printed greeting from my stash which was created using a font and punched with the Modern Label punch (SU).  I layered two circle punchies to create an accent for it.  I embossed the green one with a flower from an embossing folder (CB) and layered it onto a yellow one before added the printed label punchie which I adhered to my card front using 3D foam tape. 
It was so good to see so many of my cousins which I had not seen in over 20 years at the funeral and it was wonderful celebration of my uncles life.  He will be missed!          Therese

Handmade paper, crocus digital image and a little punched greeting for a quick card

Another paper background I found in my stash was this handmade paper one!!  I have a little bucket on my desk into which I have been adding trimmed backgrounds leftover from other projects.  I mounted the handmade paper (I made myself) to a light yellow card and went looking for an image that would compliment it.  I found this little laser printed crocus image (CLKER) which was just the right size so I watercoloured it, mounted it to a rectangle of yellow cardstock and added a small greeting (Word Window - SU) below it.  I distressed its edges before mounting to my card front over the handmade paper.
I am having fun making cards and using up my supplies but goodness me I have enough for more than a lifetime!!

Therese