Contact me

Saturday, December 17, 2011

Masculine Cards

I am always in need of masculine cards at this time of year and usually there are none to be found in my card box.  So it was yesterday when I went looking.  I decided to make a few to rectify that situation!!
I used a few preprinted images from my cardmaking supply box and while I was there I picked a few pieces that I thought would be appropriate as backgrounds and some greetings as well.  It was fun to make up some cards with different designs and supplies and only have to make one of each!!  I watercoloured my images, distressed their edges and found paper and cardstock to go with them.  The boots are a digital image from Beccy's.   She has several different images that are really appropriate for masculine cards.  The backgrounds are ones I have created - green one is acrylic paint, the corrugated is walnut ink and the bottom one is watercolour with plastic wrap.  Two of the greetings are printed on transparency and the other is an oval punchie.  Added a  few brads and I had three cards ready to go!!
We are down to the short strokes for being ready for Christmas!  That feels good!!

Therese

Baby cards!

I have been busy for the last few days making receiving blankets and burp  cloths for my daughter on occasion of the arrival of our newest grandson. My niece also had a baby at the beginning of December so I decided to make a few cards for each of them using the scraps of flannelette I had leftover.
For the top one, I sewed a piece of yellow handmade paper onto dark brown cardstock with a strip of polka dot fabric placed in between which I then tied with brown embroidery floss to simulate a bow. The little patchwork horse is a digital image from Beccy's.   I coloured it in appropriate colours, trimmed it with scallop decorative scissors and pierced each scallop using a push pin on an old mouse pad.  Used 3D foam tape to adhere it to the card front overlapping the fabric strip.
For the lower one, I sewed a piece of fabric overlaid with some brown rick rack to dark brown cardstock.  I tucked the ends of the rick rack inside the card and secured them with double sided tape.  Coloured and embellished my image and secured it to the card front with 3D foam tape.
The cards will make perfect Thank you cards!!

Therese

Retirement Card


My DH has retired!!  I made him a card to celebrate this momentous occasion!  I included on it images or words to represent all the activities he plans to participate in as he finds himself with more time on his hands.  I downloaded most of them off the internet, sized them and laser printed them onto kraft cardstock.  Trimmed them to size,  sponged all the edges, laid them on the stamped card front and then glued them into place.  Used 3D foam tape for some of them just to make them pop a little more!!

Therese

Tuesday, December 13, 2011

Winter greetings card

Created a card for winter greetings for a couple who do not celebrate Christmas. A new year is always a time for reflection and in Canada also a time when we can most appreciate the winter season so I created a soft white on white card for them.
Embossed a panel with the Swirl oval embossing folder (SX), die cut an oval (NS) and embossed it with Swiss Dot (CB), added snowbanks trimmed at the bottom with the oval nestie, a 1" moon punchie from pearly paper and a little pine tree (M) all layered on a white card. Finished it off with a white and gold ribbon simply tied with gold cording.

Therese

Friday, December 09, 2011

Christmas - embossed with bling

Created another set of kits the other day using several of the designs from my last class and this one!! This is a quick and easy Christmas card. Stamp the greeting, emboss the layer (SU), add a ribbon and attach to your card front. I added some rhinestones to the center of the snowflakes as well which is a great finishing touch for these elegant cards!!

Not sure I will be posting again before the holidays so I thought I would add my wishes for all of you here.

I wish you all a blessed Christmas season and every blessing in 2012!!
Enjoy your family and friends!
Celebrate the joy and fun of the season!
Make some memories!!
Treasure the blessings you receive!!

Thanks for being here and letting me share my creative experience with you!!

Therese

Cardmaking - Dec - #8 envelope

I have seen quite a few cards online lately with elements sticking out of the sides of the card and so challenged myself to see if I could figure how to make that happen!! I know it is not that difficult to make it stick out but getting it to fit in the envelope is what I was concerned about. In the end, I decided to use a 5.5"x8.5" piece of cardstock folded into three sections, added a tab punchie to create a bit of interest and that fit perfectly in the #8 envelopes I have on hand!! So fun when a plan comes together!
From a variety of hand decorated paper/cardstocks I cut 2" panels, punched some shapes out of them, glued them to my card bases and then scored a line to give them an even border. Next, I folded the other end up to make a 3.5" card which was perfect for my envelope. I embossed the bottom flap and added the tab punchie to the top flap. Added a single layer insert to the middle section for writing a message.
Here you can see how easily this design can also be used to create Christmas cards!! I punched out snowflakes, backed the openings with packing tape, added a small rhinestone in the center then rubbed on glitter!! Used the snowflake embossing folder on the bottom flap and added an appropriate greeting on the inside!!

Very quick and easy!!

Therese

Cardmaking - Dec - flocked ribbon

I have been collecting flocked ribbon for a while thinking it would be a great way to add texture to a card so I dug out the rolls and worked out a design!! I started with a quarter sheet of designer paper that coordinated with the ribbon which I border punched and added a coordinating cardstock strip which I embossed. I cut "V"shapes on all of their bottom edges. Love the look!! Added a colour printed greeting with brads!! Done!!

It always helps to make quick work of a card when the supplies are few and quick to assemble!!

Therese

Cardmaking - Dec - fabric ribbon

I have been wanting to challenge myself to use fabric on some of my cards for a while now and decided I would give it a try for this month's Thank you cards. I created "ribbon" by cutting a strip of lame fabric and hemming both sides!! I love how reflective the lame fabric is while still being very soft and light. I did use some of my wider ribbons for these cards too. When I assembled my sample card, I gathered the ribbon and then placed the layered greeting with 3D foam tape on the back of it over the gathering to capture it. Sometimes, easier said that done!! One girl at class simply placed her greeting oval where she wanted it and then slipped the ribbon in behind!! Way easier!!!! One of the reasons I so love teaching - I learn from my students!! After that, it is a simply a matter of tucking the ends of the ribbon between the decorative cardstock layer and the card front using double sided tape!! I love the simple elegance of these cards!!
This design could easily be created as Christmas cards using a wide Christmas ribbon, some coordinating decorative paper and cardstock!! I laser printed my greeting but it could just as easily have been stamped and punched!! Those supplies will be going on sale with deep discounts in the next few weeks so consider planning ahead and getting your 2012 Christmas cards started in the new year before the Christmas feeling wears off!!

Therese

Cardmaking - Dec - Cardinal

December has arrived and most of us are counting down to Christmas hoping the to do list will be conquered in the time we have to get it done! I designed cards for this month's class that are
appropriate for expressing your appreciation for the blessings received over the Christmas season. It is more likely they will be sent if they are ready to go before the season truly gets busy!!
I saw this card on Splitcoast Stampers with its cute little cardinal and after a bit of examination, figured it was created using several punches so dug out my selection to see if I could replicate the little bird. *See below for details in creating the cardinal. I am very happy with the way it turned out!! I sponged all the pieces with black ink and then assemble it. After embossing the label (TH-SX) I added the little green sprigs (MS) punchies and sat the bird just above them. I used the slot punch (SU) to create the openings for my ribbon and glued their ends to the inside of the card. The background paper is one that I created a few years ago using acrylic paint washes and a background stamp I created by gluing fun foam snowflakes to a piece of acrylic. Once I had washed the paper with colour I simply placed the stamp on the wet surface and it moved the colour around which gave a very beautiful subtle texture to the paper which was perfect for this card. I brought along some stamps to let everyone customize their cards to their needs.

It is getting busy! I have parcels to send out, a Christmas letter to print and cards to mail!! Most of the shopping has been done - thanks to DH!!
If your list is looking too long for the time left I suggest you start deleting and/or delegating!! Get creative - no one will ever know that you had intended to make pies and goodies instead of buying them from the local bakery, (baker, friend, farmers market or bake sale)!!


Therese

*A Cardinal tutorial I found on line which is pretty close to what I did. I used a 1 3/4" punch (SU) for the body, 1" punch (SU) for the wing and a scallop punch (SU) for the tail. I used the 1 3/4" punch to create the "face" and just hand cut the beak.

Face: The photo on the left shows the creation of the beak section using the 1 3/4" punch. I first cut a 3/4" strip of black cardstock and removed a concave section from the end by placing the end into the punch and lining up both corners with the cutting edge of the punch and taking out a small slice. The next step is shown here: place the concave end into the punch until you have one edge lined up with the cutting edge and the other edge of the cardstock is about 1/4" away from the cutting edge. The little piece makes a perfect "face" for your cardinal.
Body: Use the 1 3/4" punch and fill the punch opening to about 3/4 full just off the edge of the paper. OR Punch a full circle and trim off about a 1/4 of it.
Wing: Punch about a half of the 1" circle OR Punch a full 1" circle and cut it in half to create two wings.
Tail: Punch a full scallop punchie and cut from the bottom of one scallop to center of punchie. Count two scallops and cut from the bottom of that scallop to the center. One scallop punch will make several tails. NOTE: you could substitute a heart punchie for the tail.
Beak: 3/4" x 1/4" scrap of yellow cut to a blunt point on one end
Eye: mini white brad.

Saturday, December 03, 2011

Green Gift Tags!!

They don't look obviously green do they?? They are green as in good for the Earth - rather than green in colour - because I created them to be reused!!!
I used quilting fabric with a variety of images on it, applied Heat and Bond to the back and cut them out to create the central elements for the tags. I used a heavy cotton fabric for the base of the tags and added a
backing of light fabric at the back of the top section that will show above the pocket. I added stitching on the top section to attach the fabrics to each other which also provided some texture. I had planned to do some free motion stitching but my first attempt with a new foot broke the needle so I will be going to the shop and getting a demonstration on how to use it before I try again. I have never used this kind of free motion foot before so it is possible that I had it installed incorrectly or am unaware of the finer points of its use.
I hemmed the top of the pocket, folded it up, pressed the fold and ironed on my central element leaving even margins. With everything in place I used a zig zag stitch all the way around which finished the edges and created the pocket at the same time. After trimming off the hairy bits I used cotton cording in a large eyed needle to create ties. Here is the reusable part - I created cardstock tags that fit in the pocket and can be replaced every year!!! So you can have beautiful tags on your gifts every year!! By adding a hanger instead of ties, these could easily be used as ornaments on your tree. With a bit of planning, they could also be used as gift card holders!! It is a bit of an investment of time but they will last for years!!
Do you consider green options when wrapping your gifts? Reusable fabric bags instead of paper ones? Gift certificates or coupons for services that can be packaged in reusable packaging like little metal boxes or handmade paper or fabric holders?
To keep your holiday dollars in your community consider buying local - gift certificates for hair cuts, lawn care, snow removal, craft or exercises classes, meals at locally owned restaurants, etc. Give locally made jams/baking or "meals" (the ingredients to a favorite dish) in a basket. These also require less "shopping" which will leave some time to enjoy hot chocolate and a movie with your family, visit shut ins or volunteer to help a neighbor with their tree decorating!!

I am happy to have my tags ready to go!! We will be having our exchange later this week!!

Therese

Tuesday, November 29, 2011

Birth announcements!!

A new baby!! He joined the family earlier this month and everyone is doing fine. His big sister is enjoying her new status and he is eating sufficiently to grow a few inches before Christmas. We are looking forward to seeing the whole family over the holidays!!
I started with a great picture of this little boy cradled in his Dad's arms!! To avoid clashes of colour I converted the photo to black and white and increased the contrast a bit to get better definition. I laser printed the photo, cut it out using a large oval die (NS) and glued it in the center of the panel which I had previously embossed using the Swirl oval embossing folder (CB). His name is printed on the front of the folded accent which I trimmed with decorative scissors, his birth information is inside and the whole piece is nicely tied with some blue fiber. I adhered it to the panel using double sided tape.
My daughter is including them in her Christmas cards so I kept the layers and embellishments to a minimum.
I am grateful for family!! So fun to have little ones to keep our perspective on life focused in the here and now!!

Therese

Monday, November 28, 2011

Cute mitten Count down calendar

What fun I had today!! I bought 24 little red mittens, a green foil garland and made an advent calendar for two of my grandchildren!!
I created the numbers (1-24) using Corel Draw and printed them out, but stickers or stamped numbers would work just as well. Punched them out with my 1.25" punch (SU), punched a hole at the top and stitched them to the front of the mittens using cotton cord. I laid out the garland, positioned the mittens evenly and using a length of the same white cord I used a needle to attach the cording to the top edge of the mitten and then tied the two ends around the garland. Cute!!!!!!!!!! There is enough room in the mitten to stash a little surprise for the two of them and it works perfectly as a Christmas decoration!! When they are no longer interested in participating in the process of counting down to Christmas the whole thing can be dismantled leaving twelve pairs of mittens and a green garland to repurpose elsewhere!! These little mittens were so cute and would make great ornaments as well.
Thrifty tip: Create an unbreakable and long lasting countdown calendar for less than $10 which can be repurposed when no longer needed!!
So it is winging its way to their house as we speak!!! I included a few little surprises as well!!

Therese

Tuesday, November 22, 2011

2012 Calendar

On AFTCM, I signed up for a desktop calendar swap. I created this one using two blank coasters which I bound together after they were embellished. On the right hand side, I added a label die cut (TH-SX) layered with an oval (NS) and a butterfly punchie (SU) using brads over the last bit of this decorative paper I had left from my trip to London two years ago. I left the layer loose so that little notes could be tucked under it. On the right hand side, I attached a clear acetate layer with brads and tucked a set of small calendar pages in behind it. After the year is over the recipient can add another set of small calendar pages or insert a photo or quote instead. It will be a gift that keeps on giving!!
I love the soft colours and flowery design of this paper!! Very happy with the way the calendar worked out!!

Therese

Tree ornaments

With card classes behind me I have been working on getting some of my other projects done!! In this case, tree ornaments for a swap on one of my groups - Art Techniques.
I started with a piece of fabric paper I created a while back. I always thought I would use it to make some hearts so when it came time to make ornaments I
decided to make some heart shaped ones!! I free hand drew the hearts on the back of the fabric paper, cut them out, laid them onto some coordinating ruby coloured upholstery fabric (remnant/sample) and cut out a backing piece for each one. I sewed a piece of cardstock with my info printed on it and embellished with a cancelled Christmas postage stamp to the backer. The filling I cut from some fleece I had on hand. I embellished the fronts by sewing on a piece of lace, ribbon and a length of twill tape on which I had stamped "spirit of peace" with a magnetic rubber stamp alphabet. I added a cancelled Christmas postage stamp from my collection to each one!! I layered all the pieces, added a ribbon hanger between the front and the fleece and sewed a close zig zag stitch all the way around to combine them. For a little dimension I added a little rosette of gathered tulle and a metal key charm. On the back I tied on a pearly button using the ends of the floss I used to sew on the rosette.
It will be fun to see what I get in return. If I am lucky they will arrive in return mail before Christmas!!

Therese

Friday, November 18, 2011

Christmas cards - label die cut

This was a very fun card to do. I created the background paper!! Earlier this year I was drawn to start collecting all the strips of paper I was creating as I was trimming paper for my paper crafting. I had accumulated a good sized pile in a wide variety of colours and saw this card on Splitcoast Stampers where she had created a background using layered strips so I decided to give it a try!! I sorted through the box and put all the green, red and yellow strips in one pile and the teal, blue, purple and pink in another. I used quarter sheets of scrap paper and just applied glue to the paper and started adding strips until the paper as completely covered. Once they were dry, I die cut them using a large label die (TH - SX), embossed them with a large polka dot embossing folder, ran a dye ink pad over some of the surface, quickly added some glitter embossing powder and heated it under my heat gun!! Voila!! A beautiful background!!! As not to cover up too much of the background, I decided to add a simple greeting. The little Merry Christmas greeting I downloaded from When the Scrap Hits the Fun a while back was just perfect for what I needed. I added a few bands of red and green and some holly to the first one and some blue bands and some snowflakes to the second one, printed them, punched them out (1 3/8" SU) and layered them onto a scalloped circle punchie (SU). Added a ribbon and tied a short piece to it for the look of a bow and glued my greeting embellishment just below it with 3D foam tape.
It is a very fun and rather different look for a Christmas card!! Last night, one of the girls' husband is Jamaican and she thought that this card would be perfect for sending their holiday greetings to his relatives in Jamaica!! Love it when things work out that way!!

So that was the last of my Christmas card classes for this year!! We will be making Thank you cards in early December to acknowledge the blessings of the seasons as they arrive!!

Winter has yet to arrive here - there is someone cutting their grass this morning!!

Therese

Christmas card - embossed candle

These elegant cards are quick and easy!! Just some decorative paper as a background and a gold embossed candle image (Hampton Arts) layered onto coordinating cardstock and adhered using 3D foam tape. What really makes these so great is the paper that I have used for the backgrounds which work so well with the gold embossing of the candle. I used bleach to lighten certain areas on the images embossed on the kraft cardstock - it bleaches to a beautiful yellow colour. Worked perfectly on this card I made earlier this year!! In this case I just painted watercolour into some of the bleached areas to add just a bit of colour as I did to the pale pink one!!
THRIFTY TIP: Keep an eye out for great paper as you are shopping this holiday season!!

Therese

Christmas cards - snowman

A cute little snowman!! This snowman image with its chunky style works really well with this embossed handmade paper I made during the summer using an embossing surface I created with fun foam snowflake shapes. The snowman image is actually one from an internet font - Winter Wonderland*. Fonts contain vector based images so they enlarge quite nicely!! I trimmed my handmade paper to size, added the black organza polka dot ribbon and tied on the left over piece using a single knot, coloured and layered my image which I adhered with 3D foam tape and finally added my snowflake (SU) punchie with a mini black brad.
I am happy with my card and how well all the chunky elements work together and are contrasted by the soft polka dot ribbon!! I don't usually buy printed ribbon but it was the perfect fit for this card.
*THRIFTY TIP: Keep an eye out for graphic fonts that have images you can use for your cardmaking. Many are free to download.

Therese


Christmas cards - three trees

Had a wonderful bunch of girls over last night to make Christmas cards!! It is always great to spend time with like minded people doing something you enjoy!!!
Three little trees (Sizzix -movers and shapers die) each cut from a different material - dark green wool felt (felted the sweater myself), handmade paper (my own) and white cardstock!! I have been appreciating cards with these large greetings on the front so I thought I would try designing one. Colour printed mine after doing the layout in Corel Draw and cut them apart. I glued it to the card front which has some snowflakes stamped on it in a very dark green. Added the ribbon and glued both ends to the inside of the card then added the snow banks with a white gel pen below it. The little felt tree has been embellished with red metallic embroidery floss and three little white brads. I moved them around until I was happy with the layout and glued them down. I used regular glue stick for the white cardstock and handmade paper trees. The little felt one required three glue dots applied to the back of the brads to keep him in place.
I really like the texture provided by the felt and the handmade paper and it contrasts nicely with the smooth surface of the greeting and the white tree!!

I hope you are on your way to creating your Christmas cards. Lots of inspiration on my blog from the classes I have taught in the last month, so check them out!! It is not too late to start!!

Therese


Wednesday, November 16, 2011

Cardmaking - November - Peace

This was my quick and easy card for this session!! I laser printed this very cool sentiment in black onto kraft carstock, layered it onto red and then onto black. I used thisgreat decorative paper which I had in both green and red onto coordinating cardstock for the card fronts. Just a bit of 3D foam tape and a little heart punchie and the card was ready to go!! I did add faux stitching around the edges of the red one but I did not find it necessary on the green one!!
So keep an eye out for some great papers when you are shopping the malls in the next month or so!!

Therese

Cardmaking - November - Snowman

More sparkly handmade paper!! This is the last of it but it was great and I will be making more. I used the rest of it on these cards a while back. In this case, I layered the handmade paper to the card front after attaching my ribbon ends with double sided tape to it's back side. Watercoloured my little snowman image which I layered onto coordinating cardstock and trimmed close using decorative scissors. I trimmed my printed greeting as well and layered it onto coordinating cardstock. I attached both elements to the card front using 3D foam ape. Tied a loose knot in a short piece of ribbon and glued in place over my image using double sided tape. The little snowflake sequin was added using a small white brad.
I love this little snowman! It was a download from Jelly Park challenges blog. It was a freebie on their first challenge in July!
I will be watching for that prismatic gift wrap over the holidays to be used in my handmade paper for Christmas cards next year!!

Therese

Cardmaking - November - glitzy medallion

Love the glitz and pizzazz of this card!! The background paper is one that I printed at home on my laser printer from a file I downloaded from the internet. You can check it out here!! All Free Dowload has lots of great images!! I downloaded the green and red one and with one little slide of the hue button under "Adjust colour" in Photo Elements I created the blue one!! Fun!!
I added the ornament which features a large snowflake metal embellishment which in a former life was an earring!! I glued it to the embossed ornament using a large glue dot because of the weight of the embellishment. I added a silver top to my ornament and punched a hole for the ribbon (the punch I forgot to bring to class) which I ran to the top of my card and glued to the inside of my card using double sided tape. I tied another short length of ribbon into a bow just above the silver hanger. The ornament is attached to the layered card front using 3D foam tape. I trimmed my sentiment with decorative scissors and attached it with two tiny white brads!!

Therese

Cardmaking - November - sanded elements

Another great cardmaking session!! Had a few new cardmakers which was great!!
The three elements on this card were embossed and cut in one piece with a Sizzix embossing die using white core cardstock. I sanded the raised surface then cut them apart to create individual elements. I layered them over an embossed (CB - Swiss Dot) background using 3D foam tape. Once in place, I embellished the elements with tiny rhinestones!!
I used this die a while back - you can check out my other card here! Also sanded a different embossed design on this card.
We did discover at class that one could sand the element too much and we all had to make do because I forgot a punch at home so we were really using my class motto - "There are no mistakes, only opportunities for creativity!!"

Therese

Saturday, November 12, 2011

Christmas cards - shiny ornaments

Who knew that sequins could make such cool looking ornaments!!! To convert sequins into ornaments I created little strings with words in them and bows on the ends to hang them from!! I just used double sided tape and attached the sequins below the laser printed strings!! Cute!
I layered the ornaments onto cardstock, added a snowflake border (MS), a length of ribbon using double sided tape and a snowflake sequin with a brad to my stamped card front to complete my card!! As you can see, the border can be used in several different ways and the girls got really creative with these!! The best part of teaching is the opportunity to see others be creative in ways you simply could not have envisioned with the supplies you have provided!!
THRIFTY TIP: Of course, you could substitute circle punchies instead. These are 3/4". It would be a great way to use up the little scraps of cool paper you have been hesitant to throw out!!!

Two more classes to go, so am still in Christmas card mode!! More later!!

Are you inspired yet?? I hope so - make a few cards today!!

Therese

Christmas cards - sketchy images

I just love these little images!!! I downloaded them (Christmas themed Sketchy) from All Free Download sometime in the last few weeks and really thought they would make great Christmas cards. I had to separate the elements electronically so I could use them individually which took a bit of time in Photo Elements. I laid the images out in Corel Draw and laser printed 16 to a sheet of 8.5 x 11!! I am super happy with the way they turned out.
A simple layout - embossed kraft backgrounds with a bit of sponging around the edges, cording in white or black and colour printed images layered onto black cardstock!! I added a little stamped greeting (SU) in black to the images!!

NOTE: I just did a bit more research on these graphics and found the artist!! They can also be downloaded from his blog - Blog.SpoonGraphics!

Therese

Christmas cards - poinsettias

I love the texture of these flowers - a beautiful velvety surface!! They were beautiful, the perfect size for cardmaking and a good price - needless to say, several bunches came home with me from Michaels last week!!
To ensure that the flowers were the star of these cards, I layered them onto a simple green label die cut (TH -SX) through which I had threaded a subdued gold ribbon. I glued the label to a piece of white cardstock which had been shimmered, embossed (SU) and also had a colour printed greeting. I laser printed the greetings before I shimmered the paper so was a little concerned that the printing might be affected by the alcohol in the shimmering process. No problem!! I used Gold Interference Pearl Ex which because it has no binding agent required that I seal the surface before proceeding with the embossing. I used aerosol hairspray as a sealer.
The flowers had chunky glittered centers which I removed and replaced with a little punchie and a brad to hold the layers together. I dug through my stash of silk greenery for leaves that were more appropriate in size than what came with them. I found several options which worked. I positioned the flowers and leaves on the die cut, removed the flower and glued the leaves in place and then added the flower using double sided tape. I had no trouble getting mine to stick but it is possible that glue dots might be a better adhesive for that purpose. With ribbon ends wrapped to the back and adhered with double sided tape I glued the whole layer to my card front. The flowers have some dimension but I think they will not pose a problem when being mailed as they should flatten easily when inserted in the envelope.

Therese

Christmas cards - sanded snowflakes

Spent another wonderful morning with a great bunch of ladies making Christmas cards!!
I love the look of these snowflakes - a bit shabby chic!! The look is the result of sanding embossed white core cardstock!! For these cards I thermally embossed a greeting in the top section of the cardstock layer and dry embossed the bottom section using a snowflake embossing folder (CB). Just a bit of sanding removes the printed colour to reveal the white below. Less sanding gives a more subtle look and a bit more reveals more of the white core and gives a more pronounced look!! For sanding, I used a piece of fine sandpaper over a wood block but you can use what you have.
To the sanded layer I added a snowflake border (MS) in white. a coordinating ribbon and adhered a snowflake confetti using a brad. This whole element was then glued to my card front. It was fun to create these in different colours but that left me wanting snowflakes in colours which I did not have on hand so I altered white snowflake confetti to coordinate with my cardstock by applying ink to them using my Sharpie markers and using a cotton swab dampened with alcohol to blend and/or dilute the colour. Worked perfectly!! You could use Copic markers or alcohol inks in a similar way.
THRIFTY TIP: You can make your own white core cardstock by simply painting a quarter sheet of white cardstock with acrylic paint and letting it dry thoroughly!! The great thing about making your own is that you can make it any colour you want and it is also cost effective!! You can check out my double embossed backgrounds here where I used the above technique for creating white core cardstock.

Therese

Saturday, November 05, 2011

Christmas - embossed elements

I used an embossing Sizzlits die by Sizzix to create these embossed elements!! There are three elements combined in one piece so I cut them apart so I could use the ones I wanted and arrange them to suit me. I simply added the elements to dark cardstock, incorporated a ribbon and a couple of rhinestones and I was done!! You could always add some lines of faux stitching with a gel pen if you need a little more embellishment. This is a quick and easy card!! I will be using this die again!!
This is a different kind of fake bow. For this one, you tie a shorter piece of ribbon to a length of ribbon. It has the advantage of being movable on the piece which allows for adjustment once it is tied. Just one single knot is all you need.
A note on the rhinestones: I bought these on a roll and cut them apart so I could use them individually. I first cut down the middle of the double row with an exacto knife and then into twos for the kits. They are easy to use - simply cut apart and peel the rhinestone off the carrier material and position where you want it!! These were the smallest rhinestones available (3mm) and I anticipate they will not cause problems when these cards enter the postal system on their way to their final destination! There are a LOT of rhinestones in one package and when purchased with a coupon makes them a great value.

I saved the easiest card for last because after a few hours of cardmaking everyone is wanting to get finished and on with their day. We were finished in really good time today!!
If you need more inspiration as you tackle getting your Christmas cards done just click the " Christmas" label in the list on the lower right hand side of my blog!!

Therese

Christmas card - sparkly handmade paper

I kept this card simple to highlight the great handmade paper!! I made this paper this summer using SU cardstock, prismatic gift wrap and some white paper confetti!! You can check it out here!!
I trimmed the handmade paper to leave an even margin all the way around by folding and tearing it to maintain the deckle edge then glued it to the white card front. I layered the snowflakes from large to small (SX dies, MS punch), used a push pin to make a hole in the center and added a brad. The other element on the card is a cute little saying printed on vellum. I played with the two elements until I was happy with the design, pierced a hole through the vellum and card front to which I added the snowflake element. The brad holds all the elements to the card front as I resisted using any sort of adhesive on the vellum. It was fun to create the little greeting which includes the words, a little snowflake and a dotted line that creates the path the little snowflake might have taken on its way down. I think all the elements work very well together - glitter and the look of falling snow in the handmade paper combined with the layered snowflake and the little greeting! We had fun making these in four different colours - blue, purple, pink and turquoise!!

Therese

Christmas card - little round window

Love the simplicity of this card!!
Some of the girls were having trouble with the bows so I suggested that they just try making a fake bow instead. That worked very well and was much easier to execute. To simulate a bow just add a shorter piece of ribbon in a single knot and pull tight. I make the knot loose, slip the smaller piece into it and slowly pull tight adjusting the short piece if needed. A little less bulk that way too.
I layered the decorative paper onto cardstock, punched a window about 1.5" from the top and added the ribbon. By positioning all the pieces on the stamped card front I was able to locate and then carefully glue the coloured image in place so it would be nicely displayed in the little punched window!! I adhered the punched layer to the card front using 3D foam tape. Some of the girls glued the image to the back of the window instead of the card front. That works too!! The stamping on the card front gives just the right amount of texture to the rest of the card!!
The little images are digital stamps that I printed onto heavy weight paper. You can find these two images at CLKER. I used two other ones from Arthur's Clipart - little jingle bells and santa with his reindeer.
Therese

Christmas card - Victorian ornament

Another Christmas card class this morning!! It was so good to spend the morning creating and listening to Christmas music!!
I really love the look of these cards - they have a soft vintage feel!!
The decorative paper is handmade paper with gold embellishment that I bought a few years ago because I really liked the texture of it!! I added a length of coffee dyed lace at the top using double sided tape. Coffee dying the lace was just what it needed - just a little soft colour!! I simply added the lace to some strong coffee (instant coffee and hot water), left it to soak for a few minutes, rinsed it out and hung it out to dry!! Just had to touch it with the iron a bit before using it on my card. Once I added the lace I glued the decorative paper to the front of my card. I added the colour printed punched victorian snowflake image (CLKER) to my die cut ornament (SX) and glued it to the front of the card using 3D foam tape leaving enough room to the right for my stamped NOEL oval greeting (SU punch). The greeting is from Quietfire Design!! I tied a bit of gold cording using a single knot to the lace above the ornament and drew a line from the ornament to lace with a marker to make it look like it is hanging. I drew the line to the top of the handmade paper on the maroon card and I find it is too much. Less is more in this case!!
I am always on the look out for different and interesting paper!! Really glad I picked some of this paper up when I did!!

Therese

Wednesday, November 02, 2011

Christmas cards - snowman

A wonderful little snowman!!! Used some of these little guys on this card last year!!
The card front has been stamped with white snowflakes which creates a snowy scene when combined with the ripped white strip at the bottom which simulates a snowbank. The front accent has been trimmed to size, cut with a circle die (NS) and embossed with a snowflake embossing folder. I added a cute little ticket as the greeting on this card. It is a freebie I downloaded from Scribbles by Sandy!! She has a some really neat digital stamps on her site!! I printed the little tickets, added a bit of colour and stapled this one to the layer incorporating a red string which I just tied to the staple. For the class, I decided to use a paper clip instead which works better for the kits I created!! After attaching the greeting I used 3D foam tape to attach this element to the card front. Finally, I glued my little snowman embellishment inside the opening with 3D foam tape!!
Really happy with how this one turned out!!

Therese

Christmas cards - confetti tree

This was a fun card!! I have had these little confetti trees for a really long time so I decided to see if I could come up with a design that would highlight them adequately - they are so shiny and bright!! (Not evident on the scan) Very happy with this design!!
I added shimmer to white cardstock using gold interference Pearl Ex and alcohol in a spray bottle. A beautiful subtle shimmer - just what I was looking for!! Once dry, I embossed quarter sheets using this star embossing folder which is available at Ecstasy Crafts!! It nicely echoes the stars on the tree and creates the perfect little embossed space for showing off this shiny little accent! I adhered it in place using tiny pieces of double sided tape but several girls at class this morning just used glue stick. I added ribbon diagonally to the corners and used double sided tape on the back to hold the ends in place, then glued the whole embossed layer to the green card front. The lower right hand ribbon has a second piece of ribbon tied to it using a single knot which also encompasses several strands of gold embroidery thread. This treatment gives you the look of a bow without the bulk which is often a concern when mailing handmade cards during the holiday season!!

Therese

Christmas Cards - Peace Dove

The little dove featured on this card has been die cut using a Sizzix die that belongs to my sister. I love being able to borrow tools from creative friends and family!! It just expands the opportunity for creativity!!
For this card, I cut two pieces of decorative paper and glued one to the top and the other to the bottom leaving even margins. I added the colur printed greeting between them using 3D foam tape. I layered the dove to a die cut circle (NS) and then to a darker scalloped circle (NS). I embellished the greeting and the dove accent with a clear Stardust gel pen before mounting the accent to the left of the greeting. I love this pen because it lays down just clear glitter - no colour - so you can add it anywhere!! Available locally at Ecstasy Crafts! Certainly, you can use any other gel pen or even glitter glue instead.

Therese

Christmas cards - snowflakes

How is this for non traditional colours for a snowflake card?? I loved this red, orange and white paper the first time I laid eyes on it and after creating cards with it for several card classes over the the last few years it has come to an end!! The small leftover scraps have been added to my box of collage scraps. You can check out the other cards I have made with this paper here and here!
I started with a piece of this great paper which I cut with a wave on the bottom to simulate a snowbank which I layered onto white cardstsock and glued to my red card front. TIP: When gluing thin paper - apply glue to the cardstock and lay your thin paper onto it.
To create the accents, I layered a white cardstock snowflake punchie (MS) to a red circle punchie (SU 1 1/4") then to an orange one (SU 1 3/8"). Adhered them to the card front using 3D foam tape which also captured the white thread I used between them and the colour printed layered greeting. Used 3D foam tape to capture the thread at the top and then applied the greeting!!
It was fun to be creating Christmas cards this morning with a fun group of FLY women. First, Love Yourself - I just love their name!!
So begins the Christmas card making season for me - one class down - three more to go!!
If you need inspiration, just click the "Christmas" label on the lower right hand side of my blog to see what I have created.

Therese

Monday, October 31, 2011

Saturday, October 22, 2011

Natural Christmas card

This doily stamp is my latest acquisition from Stampin UP. I love it!! In an effort to use what I buy I decided to combine the doily stamp with Sylvia's Christmas card challenge - Natural, By Hand's Challenge of using a circle die and CST's challenge of using stitching in the creation of this card!! I am super happy with the way it turned out!!
I stamped the doily on an ivory card front and embossed it with clear embossing powder. To add colour, I used my newly acquired Portfolio water soluble pastels by just scribbling with the pastels onto the embossed image and using a paintbrush to spread the colour. I need a little more practice as I was not able to mix quite the colour I was looking for so I added some sponging once the surface was dry and that was closer to the look I wanted. Just love the way the doily pops!! I laser printed a round greeting and a poinsettia image from Birds Cards for the middle accent. I cut them out with a round Nestibilities, sponged them lightly, added colour with the pastels and layered them onto a brown scallop circle (NS). Added some faux stitching to the circle accent and the card using a caramel coloured marker to continue my soft and subtle look. Mounted them to the card front with 3D foam tape and added a seam binding bow to finish off the card.
Thrifty Tip: I created the bow using two pieces - one straight across the card and another folded in thirds tied to the middle of the other one with cording. It gives a nice bow with a very flat center which keeps costs down when mailing your cards because they will fit through the slot!!
So another 3 cards added to the stash - total count for this year so far 84!!

Therese

Friday, October 21, 2011

Wax paper resist!

One of my blog visitors wondered if using wax paper over white cardstock in an embossing folder would transfer enough wax to the cardstock to be used as a wax resist. I gave it a try because all the tools were sitting right at hand. Unfortunately, not so! You can see to the left my experiment. The second from the left is the cardstock I put through the embossing folder and painted with watercolour. It has a nice relief but it did not resist the colour. I decided to transfer the wax to cardstock using heat. I placed my embossed wax paper over a piece of white cardstock and wrapped it in white paper and applied heat with my iron. The cardstock has a VERY faint image of the design once colour is added - it is the far left. The cover paper I used had a much better image and resisted the colour very nicely - it is second from the right. On the right is the wax paper!! It looks interesting enough to be used as a layer on a card!!
My visitor does not have an embossing machine so I tried using just crumpled wax paper and created the paper on the left - wrinkled wax paper (left) and the resist paper on the right. You can create all sorts of patterns in wax paper - fold, draw, etc - that can be used for wax resist.

Thanks for asking!!


The two following scans are of the tissue I used as a paintbrush for the application of colour in the above experiment and the two sheets of copy paper I used to dry them with the iron. I did not expect the colour to transfer.





So one little experiment!! 10 pieces of paper I can use in my paper crafting!!
Everyday is a good day to play!! I may use these later today when I am working on challenge cards!!

Therese

Thursday, October 20, 2011

Fragment Charms!!

More charms for a swap on AFTCM!! Our bracelets are going to be great!!
Fragment charms was the theme this month so I used these plexiglass shapes as my base. The little rectangular ones were clear - the larger ones were red!!
These were fun to create!!
From my collage box I chose little images and papers for each side of my charms. I used Dimensional Magic to glue the focal element to the back of the plastic shape so it would show through the front.
I glued the back paper/image to the back of the focal image so it would show at the back - a double sided charm. It was fun to cut out shapes and create small collages!!


You can see here the fronts of three charms on the left and the back of the same charms on the right.


I coated the sides and backs of the charms with Dimensional Magic to nicely seal in the images. How do you do that without holding them, you ask?? I attached the front of the charm to the top of a push pin using double sided tape. Planted the push pin into a strip of styrofoam which gave me something to hang on to while I was applying the finish. Worked like a charm!! You need to make sure the charm is level to prevent the finish from pooling but you don't get your fingers gummed up and they can stay there until they are completely dry!!
I drilled holes near the top edge for a jump ring and my charms were finished!! I have mine packaged and ready to go to my partner in the mail today!!

Therese



Cardmaking - October - Handmade paper

I made handmade paper several times this year so my box is overflowing!! Several batches were such nice bright colours - yellow, blue and pinks which I created using SU cardstock scraps donated to me by several local demonstrators. The paper is beautiful and I wanted it to be prominent in my cards so I decided to use a full sheet (8.5" x 5.5") as my card base. I most appreciate the deckle edge on handmade paper but the sheets were not all exactly the right size so I pondered the task of trimming all the errant edges by hand which is how I normally do it. That was going to take a while!! After a bit of experimenting I came upon the idea of using my distress tool on any edges of the paper that had to be trimmed with my cutter. Worked beautifully!! Nice straight edges with a soft deckle look in a fraction of the time!!
I layered three embossed cardstock die cuts - Tattered Flowers TH (SX) and attached them to my card front with a brad. Trimmed my colour printed greeting and glued it into place!!
Love the way they turned out and my favorite is the pink and green combination!!

Therese