Large card made reusing some elements from a used commercial card

I needed a large card for an upcoming birthday and started with a birthday cake image I found on a commercial card that was donated to me.  I trimmed the image from the front of the card and created a layered greeting using a scalloped circle, a laser printed greeting (The Spruce), a couple of flower punchies, a sequin and a tiny white brad.  I added a short piece of coordinating organza ribbon before adhering my greeting usind 3D foam tape.  I cut a large purple card front and trimmed on of the other layers from the commercial card to fit on it with an even border all the way around and added a white layer to hide the words.  I added my yellow focal element over it using 3D foam tape.  Really liked how this one turned out but was not sure if it was original enough for the purpose I was intending to use it for.  So this one may go to by stash!!

I made another large card using gorgeous ribbon and a leather leaf for my daughter's birthday but forgot to get a photo so I cannot share it here!

Therese

Fun cards from kits

I made up these two cards from kits I made up for this class in May.   I used ink cartridges from the colour printer and glossy photo paper to make up the fun decorative paper and then I printed images on them using the printer.  These digital. images are from Melonheadz.  I combined them with some fun sayings for some fun cards!!  I trimmed the images and layered them onto the yellow layers which were printed with the greetings and then mounted them to the stamped card front.  They were stamped with pink ink using a script background stamp (SU).  I did use a bit of watercolour to add a bit of intensity to parts of the images to give them more dimension.    Therese

Hammered botanicals background with silk flowers and seam binding

I made a special card for my god daughter's birthday!!  I used one of my hammered botanicals for the background and found coordinating silk flowers and vintage seam binding in my stash.  I added a bit of coordinating watercolour around the edges of the background where the white was distracting and glued the 5" x 8" piece to a lightweight green cardstock.  I added a piece of purple seam binding across the length and glued the ends to the back of the layer.  On the right over the seam binding I added a layered greeting which consisted of an oval punched laser printed digital image (Birds Cards), a coordinating purple oval and an oval of vellum which I trimmed with scalloped decorative scissors.  On the left above the seam binding I added three dark purple silk flowers to which I had added tiny iridescent white sequins with tiny black brads.  I tied a short length of the same seam binding in the middle using one knot which nicely simulates a bow and positioned it where it looked like it belonged.  To finish off my card I glued this large layer to the front of a large white card (5.5" x 8.5").   I hope she enjoys it and the little treats I have included inside.  

Therese

Exchange cards with bleached backgrounds and labels with greetings

I set out to make a couple of card for my exchange group and ended up with three!!  All of them feature navy blue background paper that was stamped with bleach when I was playing a while back.  I cut each of them to 4" x 5.25", embossed them with an embossing folder and glued them to the front of a card.  I added embossed labels (TH) which have been sponged a bit with coordinating ink, some ribbon and laser printed round greetings ( Netty's Cards).  I also added some punchies/die cut elements to add a bit of texture to each of the cards.  It was fun to make all the cards different with pretty much the same sketch!!
On the first one I added my background to a blue green card and sponged the ivory label with several inks until I got the colour I was looking for.  I embossed it with a gears embossing folder and positioned the center so the large gear with be featured.  I die cut the greeting and the blue/green layer using Nestibilities.  I used a punch to remove the middle of the greeting and reveal the embossed design which I added to the blue/green circle.  It needed a bit of something so I added a rhinestone which I coloured with Sharpies to get the right colour.  I punched slots on each side and inserted short lengths of navy ribbon gluing the ends to the inside front of my card.  I die cut a flourish, trimmed it into three and embellished the label with them just tucking them underneath where they looked good.  For my second one, I glued my background to a purple card, sponged my ivory label with purple ink and added a length of coordinating ribbon over it.  I die cut the laser printed digital greeting and a coordinating layer and mounted them with 3D foam tape over the ribbon.  I punched a hole in a scrap of paper and sponged the center of the greeting with a bit of purple ink.  The little butterfly punchie was just enough to finish off my card.
For my third card I glued my background to a green card.  I sponged the embossed ivory label with green ink and die cut a hole from the middle.  I punched two small holes in each end and inserted a navy ribbon.  I mounted the label to my card front and adhered the ribbon ends to the inside front of my card.  I sponged my die cut greeting, added a green circle into the center and added a small gold flower sequin with a tiny gold brad before mounting it over the ribbon over the hole I had die cut in the label.  I added a stamped and punched butterfly (SU) to which I wrapped and tied gold embroidery thread to create the antennea.  I used a tiny piece of double sided tape to adhere it to my card front.
So two of these are off to my swap partners and the other will find its way to my card stash!!

Therese

Sympathy cards from kits

I made up these two cards from kits I made up for this class.   The card fronts are stamped - the green one with a blue ink using a script stamp (SU) and the blue one with bleach using a worn background stamp (SU).  The digital images (CLKER) were printed on the coloured ink backgrounds then trimmed to fit on the coordinating layers which have colour printed greetings on them before being mounted to the card fronts.  Quick and easy cards from kits!!       Therese

Cat card

 I made this card for my sister who had to put down her cat this week.  It is always hard to have to let go of a pet who has been part of the family for so long!!  It is a loss.

I used cat fabric for the background and stitched it on so she can remove it and use it as she wishes.  She is a quilter so she may consider making herself a mug rug or coaster with it which can remind her of her special buddy.  I added a little grass die cut at the bottom cause you know that cats and grass belong together.  I layered tow coordinating tags and stamped "thinking of you" on the top one and simply hand stitched it on so it could easily be removed.

This card fits in a #8 envelope.

Therese

Sympathy card with a butterfly

I am in need of sympathy cards this week and so made up a few so I will be ready for next time.
I made this one up from a kit from this class.   Sure is nice to have kits to put together when you are short on time!!
I started with a green blue card and added a soft background paper with lighter coloured swirls which was cut just a bit smaller which leaves an even border all the way around.  I trimmed a strip of darker blue green cardstock with scalloped decorative scissors and added some wavy lines with a pattern tracing wheel which added some texture and interest.  I pierced each scallop with a push pin as well.  I mounted it diagonally on my card and trimmed the pieces that overlapped on each side.  I watercoloured the butterfly tag (Angie Antics) with shimmery paint and added a bit of colour to the edges as well.  I used double sided tape to secure the seam binding to the tag and trimmed the ends diagonally as well.  I added the greeting to the side of the tag, trimmed it with the scallop scissors and pierced each scallop as well.  I used double sided tape to adhere the tag to my card front.    Therese

Kids Birthday cards - blue and yellow hexagons

I love the soft look of these cards!  I combined the colour printed hexagon paper with digital images from Best Clipart.  By cutting the paper in different places I was able to hightlight the yellow in one and the blue in the other.  I watercoloured the laser printed images, layered them onto coordinating die cuts and adhered them over seam binding that was added to the decorative paper.  I tied on a short piece with one knot to simulate a bow on both of  them.  I added star dust glitter to the scallops on the left hand card.
I hope this little stash of cards will come in handy in the coming year for my daughter and her kids.

Therese

Kids Birthday cards featuring fun nature characters

Really fun paper with funky animals!  I combined the paper with green card fronts and digital images from Best Clipart.  I added layered watercoloured images over ribbon/fibers changing up the orientation for each one.  In positioning my focal element I tried to leave exposed as many of the animals as possible.  I love the funky owl peeking from under the ribbon the left hand card!!   Therese

Kids Birthday Cards - bright and bold

Love this bright bold paper!!  I combined it with green card fronts and digital images from Best Clipart.  I watercoloured the images to coordinate with the paper and then layered them onto die cut circles (Nestibilities) .
For the left hand card I layered the focal image onto a red scalloped circle (Nestibilities) which I adhered to the front of my card.  I added stardust glitter dots to all the scallops and then a short piece of bright green rick rack to add texture and interest.
For the right hand card, I added a length of the bright green rick rack to the decorative paper before adhering it to my green card front.  I coloured and layered my focal element and glued it centered on my card over the rick rack.  The layouts were really were dictated by the bold elements in the paper.   Totally fun cards!!         Therese

Kids Birthday cards featuring stripes

For both of these cards I used striped decorative paper on blue cards along with two digital images from Best Clipart.  I watercoloured the images to coordinate with the background and added ribbon/fiber accents.
For the left hand card, I stitched blue gros grain ribbon to a piece of wider yellow gros grain incorporating a short piece of fiber in the process.  After adhering the ribbon and paper to my card front I added a short piece of light blue ribbon over the fiber and tied a single knot to secure the both of them .  I adhered the layered focal element to the left of the tied ribbon.  On the right hand card, I used the same fiber cutting three lengths.  I overlaid them and stitched them together near the top to created the loops.  I adhered this element to my decorated card front and adhered the watercoloured and layered focal element over it.  I like the rainbow colours in the fiber!!   Therese

Kids birthday cards - bright and blingy

For this set of cards I used a bright wavy paper and layered it onto blue card fronts along with digital images from Best Clipart.  For the left hand card I added a pale blue ribbon to which I had tied three lengths of white fiber leaving them to wave in the breeze!!  I watercoloured the balloon image to coordinate with my card, layered it onto an orange scallop circle (Nestibilities) and then adhered it to my card front over the ribbon.
For the right hand card I chose a portrait orientation and mounted my watercoloured  image over the patterned paper background.  I added some clear rhinestones to the scallops on the pink scalloped circle (Nestibillities) I layered behind the focal image.  Next I added swirls to the eye shapes on the background and added rhinestones to the ends of those as well.  I added dots to all the lines between the elements on my background as well using coordinating fine tipped markers.  Totally fun to be using some of these beautiful papers that I have been "saving"!!
Therese

Collage calendar pages repurposed into greeting cards

 I have been working on getting the pages from this 2012 handmade calendar made into greeting cards.  I was fortunate that I had used 4.25" x 5.5" as my format for the focal elements of the calendar so it was reasonably easy to convert them into A2 sized cards.   I used my heat gun to heat the back of each page to make it easier to remove the art work from the pages.  In most cases it was just a matter of trimming the background to 4" x 5.25" and adding a greeting.  

 For a few I removed some elements and replaced them with others that were more appropriate for a card. This happened most especially on the foil backed first page which had ART in the center.  I removed the red heart and added three silk flowers over the packing tape transfer to hide the letters.  Worked very well.

It was a fun project and I have another 12 cards to add to my stash!!

Therese

Kids birthday cards featuring funky letters

I promised a while back to make kids birthday cards for my daughter. These are the ones I made for her last time with balloon stickers.  This time I chose two digital images - a birthday cake with a greeting and a set of balloons to which I added a curved greeting using Corel Draw.  I got these two from Best Clipart .  I  sized them appropriately and laser printed them onto white cardstock and cut them out with a 2.5" Nestibilities Classic Circle die.  Next I dug into my decorative paper pile which may very well outlive me in order to get some cute designs for my cards!!  I started with the right hand card trimming the 12" x 12" sheet to trim off the first set of letters on the page.  I trimmed the strip between the letters and ended up with two strips a bit shorted than the 6 inches I needed so I tape them to each other and then added a blue gros grain ribbon to cover where they join.  To make up the bit of extra space I needed I added a red strip on the left hand side which I had trimmed with scallop decorative scissors and then paper pierced in each scallop with a push pin before I added this large element to a coordinating green card front.   I watercoloured my birthday cake image to coordinate with the card, layered it onto a coordinating blue scallop circle (Nestibilities) and adhered it to my card front over the ribbon.  I had trimmed off several letters and when I tried to use them on my next card they did not work as well as the first ones had so I eventually cut them all apart and glued them to my card front in a fun layout.  I added dark orange strip beneath them to add some texture and interest to the card.  I used a red marker and drew in faux stitching around all of the letter blocks which helped define them and make them into a unit for the background.  I watercoloured my balloon image to coordinate, layered it onto a blue circle (Nestibilities) before adhering it to the front of my card.
It has been fun to play with paper and make cards that I think my grand children will appreciate giving to their friends over the course of the next year or so!!

Therese

Card exchange cards that can be reused

I made a set of cards today for my card exchange.  I am using #8 envelopes and therefore used oversized cardstock to make my cards - 121/2" x 3 3/8" to make a 6 1/4" x 3 3/8" card.  I used a brown cardstock which I purchase in pad form a while back.  I cut a strip of decorative paper 3 1/8" wide off of a 12" x 12" inch sheet and cut it in two to make backgrounds for both cards.  I chose the same elements - a digital laser printed flower (Digital Graphics Cafe), a laser printed digital greeting (Beccy's Place), a strip of kraft cardstock and a couple of small strips of pink.  You can see that I changed the orientation of the cards - one landscape and the other portrait which required that I use the elements using a different layout.  On the left hand card, I glued my background paper to my card front and then added a length of kraft cardstock that has been embossed with a polka dot embossing folder.  I tied a piece of white seam binding to the top section and adhered it to my card front.  I watercoloured the flower image to coordinate with the background paper, layered it onto yellow and glued it to my card with a bit of angle.  I embellished the greeting by trimming the bottom edge with scalloped decorative scissors then added a bit of watercolour.  I used my distress tool on the small pink rectangle before adhering it to my card below my image then added the greeting between the two.
For the right hand card I embossed the kraft strip with a plaid embossing folder and flagged both ends before adhering it to my card front to which I had already glued my decorative paper.   I watercoloured my flower image, layered it onto yellow and glued it to my card at a bit of angle.  I embossed the pink strip, flagged the one end then tucked it under my image before adhering it into place.  I watercoloured the greeting after trimming off the bottom with some wavy scallop scissors and then adhered it below the pink strip and overlapping the bottom of the flower image.  I added single layer inserts on the back inside of the cards and reused instructions on the back.  Happy with how these turned out and they will be off to my swap partners early next week.        Therese

A glittery embossed background with a punched border of butterflies for these two cards

 I found these two scraps together - the turquoise stamped and glitter embossed background and the border punched butterflies!!  A friend of mine punched it for me on one of our play dates a few years ago.  So I created a couple of cards!!!  I started with two deep green card fronts and layered on the embossed pieces on the right hand side.  Added the turquoise pieces along with a scalloped turquoise border in behind on the left hand one and a black strip over the edge on the right hand one.  I found several black circles in my stash which layered very nicely with my round greetings (SU) so I slipped them under the layer before gluing everything into place.  I added sequin flowers to my stamped greetings with tiny brads and then glued them over the black layer which highlights it just enough.  I glued the butterfly border above the greeting.  I added clear rhinestones to the scallops of the border to finish off the left hand card.  Two for my stash!!

Therese

Birthday Card Set - a little boy with a frog on a very bold and bright background

The final card for my set of sixteen cards!!  You can check out this post to get the details for why and how I created this large set of cards.
For this card I started with a bright blue card front and added the green decorative paper before adhering the bottom border that was punched with a Martha Stewart border punch.  I wanted to back the image with white because a green face is simply no fun.  So I trimmed a strip of white cardstock and punched the top with one chevron (SU).  I tested my image to see if it would fit and folded the left hand edge back a quarter inch to create a flap I could use to attach it to the back of the white strip. I watercoloured the image on the back being very careful not to use too much water because vellum has an aversion to it.  I was not as success as I have been in the past but that is sometimes the way it goes.  After my image was dry I attached it to the white strip using double sided tape on the flap on the left hand side.  I added a bit of glue stick behind the greeting but that was not enough to keep it down because of the buckling from my colouring so I added two little black brads to help out.  That worked quite well.  I tucked the white strip behind the border and trimmed it at the top of the green layer before gluing it into place. The image is from Dearie Dolls.  Lots of free digital images there!!      Therese

A background that is quilted and gold embossed for a thank you card

I found this background in my stash which was created when I was teaching a class a few years ago.  I started with adhesive label, positioned all the strips then sprinkled on gold embossing powder.  The powder stuck where there was adhesive and then I just heated it to melt it!  Worked nicely!!  I trimmed it down to 4" x 5.25"  and layered it onto a dark red card.  I repeated the gold in the greeting by added a layer of gold gift wrap and by colouring my greeting using a gold gel pen.  I love this font!!  Noel!!  The layered greeting was added to the card front using 3D foam tape.            Therese

Birthday Card Set - birds of a feather scrapbooking element on some great polka dot decorative paper

My second last card for this large set of cards!!  To find out why and how I created these cards you can check out this post.
For this card, I started with a blue green card to which I added this very cool polka dot background paper which I got from my sister as we were playing with making #8 cards.  I added a blue green strip near the center to cover up some fold lines.  My sister, Sylvia, also gave me this large focal element which was part of a large scrapbooking paper which featured some great saying and beautiful doodly art before it was all the rage.  I watercoloured the image and glued it to the front of my card overlapping the little strip.  All that was needed after that was a little greeting which in this case was a watercoloured oval punchie with a laser printed greeting over a scalloped oval punchie (SU).  It was adhered to the card using double sided tape.

Therese

Birthday Card Set - Soft and subtle dragonfly die cut card

We are nearing the end of this card set!!  Only a few more to go!!  If you want to know why and how I made these cards you can check out this post.

For this card I started with a kraft card front and added  crackled decorative paper in a coordinating colour.  I created a textured strip to put across the lower portion by first stamping a crackle stamp in brown on brown cardstock then embossing with a textured embossing folder.  To add a bit of dimension I also touched it here and there with a brown ink pad to create some contrast.  I glued the strip to my card front and then layered on a decorative label punchie greeting which was embellished with shimmer watercolours just like the dragonfly.  The dragonfly got the same treatment as the ones on these cards.  Another pass through the Big Shot in the original die along with the embossing mat to highlight the embossed areas, a bit of shimmer watercolour applied with a small brush and then a small piece of double sided tape behind the body section before being applied to the card front.  I used a coordinating fine tipped marker to make a dotted line for the flight path and this card was done!!

Therese