Another sympathy card - floral image, vellum greeting and a brad

My sister's mother in law passed last week and because of a prior commitment I was not able to attend the funeral this weekend.  I have prepared this card for her and her family. 
I reused a floral image from a commercial card which I trimmed to fit onto a green A2 sized card.  I found a coordinating vellum greeting in my stash which I folded to the back and secured with double sided tape.  I flagged the left hand edge and secured it with a little gold brad.  I glued this large element to my green card.  A quick and easy card that will be sent off today!! 

Therese

Masterboard fun!! - Watercolour background, stamping and a bit of direct to paper with a ink pad

There is talk on Splitcoast Stampers about using masterboards to make up cards and it is a technique I have used in the past but is a really fun one.  I decided to give it a go.  I used a sheet of decorative paper I made a while back that was "OK" but could use a bit of a lift.  I cut an organic shape from some stamp leftover which I used to stamp all over it in teal.  I cleaned the stamp and did it again using orange.  I added olive green circles using the end of a foam tube and yellow dots using the other end which is a nice circle (soft foam "bullets").  I used Antique Linen direct to the paper to fill in the remaining white areas.  Pretty happy with the results I decided to back it with bond paper as it was only bond paper to begin with.  I just glued scrap paper to the back until it was covered. It gave it enough body to be able to die cut it properly.  I am off to make some cards!!  

Therese

Sympathy card - reused butterfly image, embossed layer and a little fiber

My aunt passed away week before last and the funeral was last week.  I had intended to go but was sidetracked with the flu and am now just getting this card out. 
I used a new embossing folder that I bought while I was away.  It is part of a Recollection set - two embossing folders and a small set of clear stamps (Christmas).  Unfortunately, the folder cut the cardstock in a few places which was a bit disappointing.  I repaired from the back and cut the opening out with a Nestibilities Classic Circle die which did the job perfectly.  I put the layer back in the embossing folder to reset the round frame.  Next time, I will cut the circle first and then emboss and will not need to repeat the process.  I tied on a little piece of white fiber between the opening and the right hand edge and mounted a butterfly image in the back of the layer nicely highlighting the butterfly.  I taped it into place before gluing this large layer to a coordinating card front.  I added a small greeting - laser printed Word Window (SU) punchie!!            Therese

Birthday cards with ribbon, embossed cardstock and 3D embellishements

Birthday cards for some special women!!  One of the groups I belong to has decided to send birthday cards to all of our members in 2019 so I volunteered to get cards ready.  I have made all the card kits and we are getting together tonight to put them together which doubles the blessing!!

All the cards are different and I have varied the greetings - round, label, rounded square and square.  All of the 3D embellishments are prepared and the sponging has been done so we will be simply assembling them but I have provided the supplies with enough flexibility that each person making them will be able to add their own creativity to the process!!

So these cards have a coloured cardstock base with a coordinating decorative paper background.  A strip of embossed cardstock and a piece of gros grain ribbon.  The greetings were laser printed, trimmed and sponged a coordinating colour.  A wide variety of 3D embellishments - layered punchies and die cuts, sequins and some fun glittered elements to add a bit of bling!!  

Getting a handmade birthday card in your mail box is always a treat in this digital age!!'

Therese

Baby elephants for this purple and yellow baby card

I have made quite a few baby cards!!  Maybe more than I needed but there it is - sometimes I get on a roll and just have so many ideas!!  This one features the little elephants (Pixabay) with yellow balloons this time.  I layered them onto purple and then over the yellow ribbon which I laid over my purple background/yellow card front combination.  I finished simply by just tying a short piece of the same ribbon to the one on the front using a single knot to simulate a bow.  No greeting really necessary on this one and it could be used a child's birthday as well. 

Therese

A beautiful daisy image from a used card featured on this monochromatic card

For the focal element on this card I die cut this white daisy image from the front of a used card.  I wanted it to stand out so I kept the rest of the card very neutral.  I mounted the daisy to an ivory embossed layer and trimmed it to the edge.  I mounted this large element to an ivory card front.  Finished it off with a little punchie greeting!! Quick and easy!!  Therese

Cute little elephants with pink balloons for a quick and easy card

A quick and easy baby card!! I embossed a white quarter sheet, trimmed it to the edge of the embossing and added a length of pink ribbon.  I mounted it to a white card front and then mounted my large colour printed image of elephants (Pixabay) https://pixabay.com/en/with distressed edges over the ribbon using double sided tape.  I tied a short piece of the same ribbon to the one on the front using a single knot to simulate a bow to finish off my card.  Love these cards!!

Therese

A floral oval in an embossed swirl frame

For this card I started by die cutting the yellow rose image from a panel from a used card.  I added a little vellum greeting which coordinated perfectly.  I folded the ends over the edge and adhered them in place with double sided tape.  I chose a quarter sheet of green cardstock and embossed the Swirl Oval (CB) and then trimmed it to the edge of the embossing.  I mounted it to a yellow card front and then mounted my yellow rose focal element to finish it off!!  Love it!!

Therese

Baby elephants with balloons make the perfect baby card!!

I love this image from Pixabay for baby cards!!  I started with a blue textured card front and added a soft blue floral background.  I added a length of white ribbon securing the ends to the inside of the card.  The image was colour printed, trimmed and layered onto yellow cardstock before being mounted to my card front using 3D foam tape.  I tied a short piece of ribbon using one knot to the one on the front to simulate a bow.  The greeting is stamped (SU) in blue.  I embellished with a yellow marker and then added some clear glitter using a gel pen.  I added a few dots of glitter to the star in the scallops as well.  I used a mask to sponge the center area to coordinate.  I mounted the greeting using a piece of double side tape on one edge and 3D foam tape on the right hand side so it would work with the image. 

Therese

Paste paper background, ribbon and a die cut focal element that features two little mice

The focal element on this card features two little mice with a piece of birthday cake which was die cut from the front of a used card.  They are pretty cute!!  I die cut an opening in the green paste paper background (made by me a while back), added a length of gray ribbon from the opening to the right hand edge securing the ends on the back  and mounted a piece of embossed yellow cardstock in behind the opening.  I mounted my little mouse die cut into the opening which highlights it perfectly!!  I tied a short piece of the same ribbon to the one on the front with one knot to simulate a bow.  I found a coordinating greeting in my stash, sponged the edges and mounted it below the ribbon on the right hand side.    Love how the paste paper looks like grass and you can see this little scene in the middle of it!!            Therese

Reused a card front for the panel on this card and added a little layered greeting

This card's main panel is from a used card and features a nice garden path with a gate.  I trimmed the panel, layered it onto purple and then mounted it to a green card front.  I added a simple layered punchie greeting which coordinates perfectly!!  The punches are from SU  - Modern Label and Word Window with a colour printed font greeting.  This one was quick and easy!!

Therese

Another star baby card that features die cuts and punchies with a central punched greeting

Still making cards for my stash and here is another baby one that features stars!!  I started with a pink card and added the scrapbook paper background.  I found stars that were the perfect colour in my little star stash bin!!!  So I took them apart a little and used some of them independently and others still layered.  This die cuts all the stars at once so I simply kept some together by putting tape on the back and removed some so they could be used separately.  I just laid them out until I was happy and glued them into place.  The single stars where adhered with white glue which I applied with fine tip applicator.  Once they were all in place I added my little greeting punchie which was sponged on the inside with a mask and on the outside edge.  With all of those in place I thought it still needed something so I dug out my little star bucket and found the other stars which coordinated in colour and gave two more size of stars.  I just moved them around until I was happy and used white glue to adhere them into place.  That was better!!  Wanting to add a little bling to my card I used my clear glitter gel pen and added some dots on the two central stars and the swirls (Clipart Panda) of the greeting.  Again, a bit of a creative stretch but really happy with the results.        Therese

A floral focal element, a white paper doily and a little laser printed greeting

For this elegant card I die cut the flower from the front of a used card using a circle Nestibility circle die.  The image went off the edge of the card so I only got a partial circle.  I mounted it to a little paper lace doily I had sitting on my desk.  It fit so perfectly!!  I embossed the two right hand corners of my black card with a floral embossing folder (SU) before adding my embellished daisy image.  I positioned the image on the edge of my card and only applied glue to the central part which leaves the nice delicate edge free.  I was tempted to trim the doily to the edge of the card but instead decided to just fold it over and glue it down.  Gives a very nice touch to the back of the card.  I added a little laser printed greeting which I layered onto silver cardstock before adding to my card front.  After another look at it I could maybe have made this one an anniversary or wedding card.    Therese

A fun robot with a colourful background and some ribbon

For one of my grandson's whose birthday is in early November!! He loves bright colours and this robot will do the trick for a cool image for his card!!
I started with a deep red card and added the decorative paper after cutting it in two.  I watercoloured the robot (Cre8tive Hands), layered it onto purple and added this cool layered flagged ribbon accent to it before adhering it to my card over the gap in the decorative paper.  I layered a small font greeting onto a punched label (SU) and mounted it overlapping the image and to the right.  I am sure he will have a fun day!!!           Therese

Two little birds with a piece of birthday cake, some gold embroidery thread and a little tag greeting

I have been having fun creating cards for my stash!!  This card features a little oval image which I punched from a used card front.  You can see another card I made with it here.  I layered the little oval over a green scalloped punchie (SU) and then pondered how I might highlight this very little focal element.  Taking a lesson from the CAS creators I decided to go very clean - a white embossed layer (CB- D'vine Swirl) layered onto a white card front.  I wanted a bit of something to add texture but it had to be fairly light so it would not overwhelm my image so I used gold embroidery thread.  It worked perfectly.  I added a piece of double sided tape below where I was going to position my oval, slid the little tag greeting (SU) onto the thread and wound my length around my hand then laid it over the tape.  I rearranged a little bit until I was happy and then pressed all the pieces into the tape where they overlapped.  I used 3D foam tape to adhered my focal over the loops of gold thread.  Love it!!  I added a little piece of double sided tape to the back of my tag to keep it in place.  I am glad that I stretched a bit of this one because I really like it and gives me the courage to create more of these when I have a wonderful little focal element to create with!!            Therese

A monochromatic baby card with a hand cut corrugated cardboard star with some twine over a polka dot background

I continue to create cards for my stash!!  This one is also a creative stretch in that is very monochromatic.   I used a brown card front and mounted a piece of colour printed polka dot paper to it which I had sponged around the edges to soften it a bit.  I applied some double sided tape in the area I wanted to position my star and applied a length of twine which I had wound onto my hand which gave me some nice rounded loops.  I rearranged them a bit and then just pressed them into the tape to keep them in place.  I sponged the edges of my hand cut star.  I had cut a bunch of these for a project and while back and it the last one from my stash.  I applied tape to the back of the star and mounted it over the twine.  I really like the look of it!!  I sponged the circle greeting in the center and on the outside edge before mounting it to the center of my star.  Super happy with the way this one worked out!!

Therese

This card features a reused card panel, a floral focal element, some texture from a tracing wheel and some ribbon

Another card for my stash!!
For this card I reused a card front with a small rose image.  I die cut the rose image out of the panel using two Nestibilities circle dies nested in each other  It produced a circle element, a ring and a large opening in the panel.  FUN!!!  I layered the rose image onto a white scalloped circle (SU) and pierced each scallop with a push pin.  I mounted the panel with the opening onto a green layer, punched the right hand side with the eyelet border punch (SU) and added a couple rows of texture in between using my tracing wheel.  The panel looked a bit plain so I added some tracing wheel lines on it as well.  Much better!!  I added a length of ribbon which coordinated with the little flower next to the rose and adhered both ends to the back of the layer.  I tied a short length to it using one knot to simulate a bow.  I mounted this large element to a pink card front, adhered my focal element into the opening and mounted my little laser printed greeting using 3D foam tape just above the ribbon on the right hand side.   Therese

Birthday card features a farm scene, some ribbon and a bit of embossing

For this card I started with the image from my stash (CLKER) which I watercoloured.  I really like how it turned out!!  I layered it onto red cardstock, embossed the bottom edge with a distressed line embossing folder and added two short pieces of red gros grain ribbon which I adhered to the back using double sided tape.  Because this was a double sided ribbon and the other side was not complimentary I had to cut the piece in two so I could use both red sides.  I ripped a coordinating piece of colour printed decorative paper in two and mounted the pieces onto a brown card front  before adding my large focal element with 3D foam tape.  The laser printed font greeting I found in my stash and sponged its edges before mounting it to my card below my image using 3D foam tape.  Lots of fun texture on this one!!          Therese

A fun hedgehog with glittery balloons on a coordinating label, some new bling and an embossed background

I am still make cards for my stash and have managed to use another piece of a used card.  Check out my first card here. I cut out the little hedgehog using an oval thinlit (SX).  I layered him onto a dark pink label die cut which coordinates with the balloons and flowers.  First time using both of these dies though I have used the others in the set.  I found a nice green card front that coordinating with my image and added a white embossed layer which I trimmed into four parts before adhering in place.  I mounted my focal element over the gaps.  I added some new bling - not rhinestones - but still very glittery!!!  I layered the laser printed greeting (Word Window punch - SU) onto a green label (Modern Label Punch - SU) and mounted it to my card front in the lower left hand corner.  I don't usually leave so much white space but this one works for me.           Therese

A baby card with an embellished image, greeting and some bright decorative paper

A card for my stash and I am stretching myself a little.  I don't usually use such bright paper for baby cards but it seemed to work best of this stamped image from my stash.  I used a rectangle Nestibility die to cut a rectangle in the paper before adhering it to my pink card front.  Works really well to nicely highlight the focal element with the same colour as the card.  The image was stamped in pink and I embellished it with clear glitter gel pen in the star and some shimmery paint on the moon.  I very lightly watercoloured the dress in pink.  I used double sided tape to secure it in the opening in the decorative paper.  I embellished the stamped greeting (SU image - scallop circle punch) as well.  I added pink in the ring using a marker and then added clear glitter with a gel pen.  I added a bit of glitter to each star in the scallops as well.  Used a punch to make a mask and sponged a bit of pink ink into the central space.  I mounted it to my card front using double sided tape after sponging the outside edges with a bit of pink ink.  I am happy with my card!!           Therese