Special occasion cards from kits!

These cards were created from kits which I prepared for my last card class.  The Valentine's card features this cute little clown and the other one is a Christmas card which features a vintage image of Christmas roses!!  All of these kits had embossed and sanded backgrounds using cardstock with a different core colour which when sanded really highlights the embossed design. I used coordinating vintage seam binding and tied a short piece to the one I added to the background to simulate a bow.  The images are colour printed digital images that were downloaded from Graphics Fairy.  Both have layered colour printed greetings.  I love creating cards for a wide variety of occasions using the same components by using a variety of images and greetings.  The elements can also be combined in a variety of layouts which varies the looks of your cards.  There are a few more cards here as well.
This Christmas card bring my stash to 14 for the month of January.  A few more than I need but that will give some extras in case I don't meet my goal in any future month. 

Therese

Valentine for a class project

 On one of my groups someone was asking for people to send along a Valentine for a class who is gathering them as a project and hoping to get some from all over the world.

I made this one up to send.  I layered two hearts - a small embossed white one over an embossed red one which I sanded a bit to highlight the embossed dots.  I added a white flower to the back of it and then layered it onto a red rectangle to which I added a line of white doodling around the edge.  I added this element to a white card front and then added the stamped greeting below using two little button brads.  I like it!  I hope the class will be happy to get a Valentine from up north!!

Therese

More cards from kits!

I have been finishing up kits from my last class.  Kits sure make creating cards quick and easy!! These kits are from this set of cards and feature full colour images, embossed and sanded backgrounds, seam binding and layered greetings.

As you can see I have an extensive selection of embossing folders so it was fun to pick designs that worked with the images I had picked out.

The birds and flower are from Graphics Fairy, the victorian woman was from a printed sheet of images, the couple is from Go Make Something and the butterfly image I do not have any credits for.

Therese

Anniversary card with hearts and embossing

I needed an anniversary card for today so I snuck a card kit from this week's class to create what I needed. For this one, I wrapped a long length of gray/silver fiber to a white embossed layer (CB - D'vine Swirl) and tied a knot.  I layered a deep silver heart punchie over a die cut embossed navy heart (SU) and used 3D foam tape to adhere it over the fiber.  I adhered a navy embossed punchie overlapping it  and added my little laser printed greeting just below to the right using 3D foam tape.
Card are so quick when you start with a card kit with all the elements ready to go!!!

Therese

January cardmaking - embossed and sanded backgrounds

This set of cards featured solid core cardstock which has been embossed and sanded to highlight the embossing.  The core of the cardstock is a different colour so sanding the embossed pattern brings out the details.  On this pink card, the effect is more subtle because sanding removes the shimmery outer coating to reveal the true colour of the cardstock below. I added a length of white seam binding before adhering the background to the black card front.  I layered the colour printed butterfly to a black layer and trimmed the one side with decorative scissors before adhering it over the seam binding on the card front using 3D foam tape. The greeting is laser printed, punched with an oval punch and then layered onto a black oval punchie SU).  Finally, I tied a short length of seam binding to the on on the front of the card to simulate a bow!

You can see the sanded effect better on these two cards which have a lighter cardstock as a core.  The sympathy card's greeting features an oval punchie (SU) inserted into an oval ribbon slide (CB).  The greeting on the green card is a window punchie (SU) over a modern label punchie (SU) in a coordinating colour.  I embellished the trimmed edges by piercing them along the curves or in the scallops with a push pin.

Again, this kit was fairly flexible in that the card could be made up in landscape or portrait and the elements could be added in a variety of positions.
All the images are from Graphics Fairy except the butterflies which I do not have any credit information for.

Therese

Valentine's cards

Valentine's cards!!  Check out the other kits from this set of cards here. Again, a variety of layouts using the same elements - an embossed background, some fiber, embossed die cuts and punchies and small laser printed greetings. I used two swirl embossing folders - one from Cuttelbug -D'vine swirls and the other is from Tim Holtz - Sizzix.  The other is CB - Musical Flourish.  The larger hearts are embossed die cuts and the others are punchies both by Stampin UP!

The colourful heart punchies are from serendipity paper I found in my stash.  They worked very well to add a bit of punch to these cards.  The other two are stamped hearts which coordinate with the heart punch also by SU.
You can see that it is easy to change up the orientation of the card along with the position of the focal element and the greetings to create a variety of sketches.

I combined white and red fiber for these cards choosing to tie on a small piece of the red onto the white just below the hearts except for one.  That one also has a layered punchie greeting to change things up a bit.

Therese

January cardmaking - Canadian Postage stamps

I love reusing and giving items a second chance!  In this case, I have utilized cancelled stamps which have in their first life accompanied a letter through the postal system.  I was going through my box of used stamps the other day and noticed a set of four stamps which featured mailboxes in each season.

They were all the same size which I thought would make them the perfect focal elements for a set of cards!! I chose cardstock which coordinated with each image cutting the card base from one and using the other to embossed this scrolled frame with a star theme.  I glued the embossed frame to the card front and then cut black rectangles to just fit into the center of the frame.

They perfectly held the postage stamp, the little note greeting which I embossed in white using my handmade stamping jig and a little coordinating ribbon flag which I stapled in place using a little gold staple.  I used 3D foam tape to secure these focal elements to the embossed layer on my card fronts.  I used Merry Christmas as a greeting with the winter postage stamps!!  All the stamps are so representative of Canada. The fall postage stamp features a tractor mail box, a yellow school bus and harvested grain fields of the western prairie. The spring one features an east coast light house and nautical mail boxes including one with a fish head.  The summer one features mail boxes shaped like a cottage, a church and a cow in a lush backdrop of the fertile fields found in the valleys of the Canadian Shield. The winter one features a chalet and a Canada Goose mail box with the Canadian Rockies in the background.  I love how these cards turned out!!
I made four of the Christmas cards which are being added to my stash. That makes my count - 13 so far!!

Therese

A flapper fabric postcard in teal, pink and gold

On my fabric postcard group I joined a swap for January that was themed :  Teal, pink and gold!!  Very close to my favorite colours so I signed up to play!!!  I decided to use small scraps of fabric and create some flaps on the bottom portion of my teal postcard.  They were cut to 1/2" wide and I cut them to 1.5" in length and lined a group of them across the bottom of my teal fabric then stitched them into place with my sewing machine.  I placed another row above them overlapping the first row.  I also offset them just a bit and stitched that set into place. I really like this glittery butterfly fabric and the colours were all keeping with the theme.  I found a pink ribbon that coordinated, positioned it above my stitch line and stitched it into place tucking the ends underneath before stitching.  I added a layer of batting to the back and added wavy lines on the top portion and then again a few lines of stitching below the flaps to keep the batting in place.  I used fusible webbing to add an interfacing layer as well as a white backer.  I decided to create a button to introduce the gold.  I used plastic packaging, some gold foil  and several layers of fabric to create my 3D embellishment.  You can check out the tutorial I created that outlines the process of making this collage button here.  I used pink thread to sew my button embellishment to the front of my postcard.  Really happy with how this all worked out.  I was really hoping to add some beading but it seems finished just the way it is, so I anticipate that I will not be adding any.  The teal layer was large enough to fold over twice to the back and then I simple hand stitched the border in place to finish off the back of the postcard.  It will be off to my partner very soon.  

Therese

January cardmaking - embossing with die cuts

For my second card for the class features embossed white backgrounds wrapped with fiber and  punchies and die cuts as the focal elements with small greetings. A very flexible kit!
For these two cards, I used a script and flourish embossing folders.  The butterfly was die cut, embellished with watercolour and finally I tied on silver cord to create the body and antenna.  The other card features an embossed heart die cut (SU) and an embossed heart punchie (SU) layered over the fiber. Made a few of these with red hearts for anyone who might want a Valentine's card.  Both have small laser printed greetings.

These kits featured hearts in other colours for anyone who was wanting anniversary cards.  The larger heart die cuts (SU) were overlaid with a metallic heart punchie (SU) and a coordinating heart punchie was added along with window punchie greetings(SU).  All kinds of options for putting together these kits.

These cards feature more elaborate focal elements created by layering die cuts and punchies and holding them together with a brad.  I used a doily die (SX) and cut two doilies - one yellow and one blue and then swapped the centers which I taped into place.  I added a flower punchie in a coordinating colour and held everything together using a small white button brad. Those are so cute!  The pink one has two pink flower die cuts, one silver flower die cut and then a pearly white punchie all held together with a large white brad.
All the focal elements were adhered to the card fronts using 3D foam tape which accommodates the bulk of the fiber very nicely.

Therese

Serendipity with an artsy greeting from ADORN IT

I found this piece of serendipity background when I went looking for something else the other day and decided I would see about creating some cards with it. The serendipity background was created using several different paper napkins and some beautiful gift wrap.  I trimmed a piece for the front of my navy card from the large sheet, added a length of blue vintage seam binding across the bottom edge and glued it to my card.  The large artsy embellishment was a gift from my sister, Sylvia, last year.  It is a section of a 12" x 12" piece of scrapbooking paper which has some beautiful doodled pieces of art by Lindsay Ostrom and is titled ADORN IT - Art Play Paintables - Be Awesome.  I hand lettered the greeting in the empty space using a fine tip Sharpie marker then fussy cut the edge and watercoloured the image.  It made the perfect embellishment/greeting for this background.  I used 3D foam tape to adhere it to the card front and then tied a short piece of seam binding to the left hand side of the piece on the card front to simulate a bow.  I don't usually put things at a angle but am challenging my comfort zone this year and I think it works very well on this card.  I am sure my sister will appreciate this fun card.

Therese

Vintage birthday greeting on this birthday card

This is another card which I created from a card kit from this week's class.
I embossed this very shimmery pink cardstock and sanded the dots to highlight them.  I added a length of white vintage seam binding and glued this layer to the front of a white card.  I laser printed and then trimmed the vintage image from Graphics Fairy and layered it onto a green rectangle.  I trimmed the right edge with scallop scissors and pierced each scallop with a push pin to add interest and texture.  There was just enough room between the image and the scallops to add a thin piece of white flat fiber.  I adhered this element to the card front overlapping the seam binding.  I tied a short piece of seam binding with a single knot to the right hand side of the one on the card front which nicely simulates a bow.  I trimmed my greeting and flagged both ends, added a green layer and trimmed it to leave an even margin all the way around.  I adhered the greeting to the card below the image using 3D foam tape.
My favorite colour combination - pink and green!!  Love this card!

Therese

Embossed metal heart with ribbon on a hot glue stenciled background

Created this anniversary card this morning to be sent out next week.  I used another background from my stash that was created using spray inks, hot glue stencils and photo paper.  I love this bright background and it worked nicely with the gold leafed heart which I received in a prize package a while back.  I layered a red embossed metal heart over it.   The metal heart was cut from a coloured aluminum tin using a Sizzix heart die.  When I auditioned the heart on the background it needed a bit of something so I when looking for a yellow ribbon.  I found this one in my stash and decided to create a flag instead of laying it across the front as is my usual habit.  I stitched the flag on the fold and used double sided tape to adhere it to the back of the heart and then to adhere the whole element to the card front.  I watercoloured the laser printed fussy cut greeting (CLKER) and mounted it to the card front using 3D foam tape.
I am really liking the artsy look of my cards so far this year!!

Therese

Christmas wrap serendipity background paper

In the last few days when I was searching for paper for a different project I found this small sheet of serendipity which I had created using Christmas gift wrap a few years ago.  I decided that I would make Christmas cards with it.  I was able to die cut three 2.25" circle from it using my Nestibilities - Classic Circles.  I love the look of the gold embossed script over the red and green collage.  I cut three little squares of gold cardstock, trimmed the bottom edge with my scallop scissors and rounded the top two corners by hand which created perfect little ornament toppers.  I overlapped them over the edge of the circle and taped them into place from the back to create my ornaments.  I decided to use an embossed background so I started by stamping Merry Christmas on the bottom section of a white quarter sheet of cardstock with pigment ink and embossing it with gold embossing powder.  I wanted the thermally embossed section to not be dry embossed so I embossed the top portion by lining up the edge of the embossing folder (SU - Decorative Dots) just above the greeting and ran it through my Big Shot.  I removed the cardstock and then positioned the embossing folder below the greeting and ran it through the Big Shot again.  Love how that turned out!!  I found this red/gold ribbon in my stash which really complimented the colours of the the ornament and decided to use it at the top of this layer.  I started by positioning my ornament and drawing in the little wire loop and the string with a fine tip Sharpie so both edges would end up under the other elements.  I adhered the ornament above the greeting and over the wire loop and then positioned the ribbon just below the top of the cardstock layer and glued both ends to the back side with double sided tape.  With this layer complete I glued it to the front of a green card.  I like the artsy simplicity of these cards.
So I have three more to add to my Christmas card stash!!  Total:  9

Therese

Cards for kids!

 My daughter was looking for kids birthday cards with french greetings so I offered to make some for her.  I decided to use a variety of graphics from Melonheadz Illustrating for images on all the cards.  She has a good selection and lots of cute ones for kids.  I laser printed the images I chose in black on white cardstock and after choosing some decorative papers I also colour printed some coordinating greetings using a variety of fonts.  I cut apart all the images and the greetings.  

Here's how I created these:  I started by choosing an image, then a decorative paper that I thought would work well and then a greeting that coordinated.  At my workspace, I decided how I would put together these elements by just playing with them until I got some inspiration.  I started by choosing a card base that coordinated with the paper and then decided how the decorative paper would be used on the card.  Some were scraps so they did not fully cover the front so I just went with it and found a layout that worked.  For the first two (above) I used a cute butterfly image.  I watercoloured them to coordinate with the decorative paper and layered them with a coordinating cardstock.  For the pink one, I layered the image with gray and left cardstock on the bottom of the image, trimmed it with scallop decorative scissors and then used a push pin to pierce each scallop.  I also used the scallop scissors on the top edge of the decorative paper.  I trimmed my greeting, added a double ribbon on the left hand side after punching it with the ribbon border punch.  I flagged the right hand side and then mounted in to gray cardstock as well and trimmed it to have an even border all the way around.  I adhered my image to the card front with 3D foam tape and then glued my greeting in the same manner.    For the right hand card, I used two pieces of coordinating decorative paper and glued them side by side on a green card front.  Layered my watercoloured image with green cardstock and adhered it to the card front using double sided tape.  I layered the greeting with both green and peach then trimmed it to have an even border all the way around.  I still needed a bit of something so I added a 3D embellishment that featured a handmade paper flower with a pearly peach button in the middle.  I adhered it with a glue dot to keep the thickness of this element to a minimum.  

Above, the card on the left features that cute little butterfly as well.  I glued my two pieces of decorative paper to my pink card front, added a strip of dark pink cardstock which I had cut on both sides with the scallop decorative scissors and pierced in the scallops which also featured a length of yellow satin ribbon through its center.  I layered the image with green and yellow and the greeting with the same dark pink leaving a even border all the way around.  I did add a small layered flower embellishment to the lower edge of the image here as well.  For the right hand card I layered my decorative paper to black and then to the blue card front.  I tucked my greeting below the green ribbon I had added to that layer and then adhered my layered watercoloured image over the ribbon on the left hand side.  I love this cute birthday cake image!!

Above, the card on the left features three piece of decorative paper layered over a light blue card front.  I layered my watercoloured sheep image with dark brown and light blue and then adhered it to the card front using 3D foam tape.  I layered the trimmed greeting in brown and adhered it with 3D foam tape as well overlapping the image and to the lower right.   For the card on the right, I used two strips of decorative paper on a dark brown card front and added a dark brown fabric trim over the gap tucking both ends behind the paper.  I layered the little airplane image which I had watercoloured onto green cardstock and adhered it over the trim using 3D foam tape.  I layered the greeting in green as well and adhered it to the card front using 3D foam tape.  

Above,  the card on the left features the cutest little monkey!!  I layered my greeting in a gap I had cut in the decorative paper and trimmed it to its edge.  I mounted this element to a dark brown card front and added three little brown hearts to the left of my greeting.   I layered the image with two light green triangles and mounted this element to my card front above the greeting.  I love this cute tree paper with this little monkey.  I love the little bat guy too!!  I used him on the other card in combination with some orange and blue decorative paper which I cut using wave decorative scissors.  I embossed the right hand side of my blue card front, glued my decorative paper in place and then adhered my little watercoloured bat guy which is layered with yellow cardstock over where they meet.  I trimmed the greeting, added a little button embellishment and adhered this element to my card front below the image.  

Above,  the left card features a beautiful image of a basket of flowers which I watercoloured to coordinate with my decorative paper.  I mounted the image to a large rectangle of pink, trimmed the right hand side with scallop scissors, pierced all the scallops and added my flagged greeting below that.  There was just enough room in between to add a length of green satin ribbon to which I tied a short piece to simulate a bow.  I used a eyelet border punch on my decorative paper, sponged the edge a bit and glued it to a yellow card front.  I then glued my focal element over the decorative paper.  The card on the right features a cute little bee with a beautiful bow!!  I layered the watercoloured image and the greeting to a large rectangle of red and added five clear rhinestones in between.  I punched the left hand side of my cherry decorative paper with a ribbon border punch and strung some red twill tape through the slots and glued the ends to the back.  I glued my decorative paper to my dark green card front and added my focal element with 3D foam tape.  

Above,  both of these cards feature the same butterfly image watercoloured to coordinate with the card's decorative paper.  For the one on the left, I cut a hole in the decorative paper and layered the butterfly on the back.  I adhered this element to my yellow card front and added my trimmed and embellished greeting below the image.  On the right, I glued the decorative paper which I had trimmed on the right with the scallop scissors to the left hand side of the card, added my layered greeting and the trimmed greeting layer below it. 

It was totally fun to create these cards. I like that the images gives the cards a similar feel even with the wide variety of sketches, papers and colours I used to create them.  It was fun to just play and create without an agenda!! I know my daughter will appreciate having cards on hand when those birthday party invitations start rolling in!!  

Therese

Gingerbread man Christmas cards

I found six of these little gingerbread men in my stash the other day when I was digging around for something else and I decided that I would use them for my January Christmas cards.  Having been pretty relaxed last year on my commitment to making Christmas cards monthly I was more rushed than I would have liked at the end of November getting what I needed finished up so I am committing this year to making Christmas cards monthly.
I started by embellishing the little gingerbread men die cuts (SX).  I added red cardstock behind their bellies, tiny white rick rack to their arms and legs, a red ribbon tie at their necks and two tiny black brads for their eyes.  I really like they way they turned out.  Next, I dug through my stash of Christmas paper and found this one - good colour and I liked the script on it.  I found the greetings in my stash as well though I did have to trim them down and flag their ends to work for this card.  I found some wide red gros grain ribbon and decided to use it to layer beneath my greetings.  I layered the greeting to the ribbon, trimmed my ribbon on both ends and used double sided tape to adhere the square end to the back of the decorative paper.  Then I glued this large element to the front of  my red card.  I used 3D foam tape to adhere my gingerbread men to these card fronts overlapping their feet just slightly over the greeting.
So begins my stash of Christmas cards!!  I have quite a few more ideas I would like to use for my cards this year so I am looking forward to working through them and getting cards made regularly.
I do have several links to challenges on my blog (right hand just a little bit down from the top) I will be checking those out for more inspiration as well.
Are you committing to making Christmas cards monthly??  If so, leave me a comment and let me know where you are going for inspiration.

Therese

A few more cards that feature a flexible sketch

 I have finished off the last of the card kits I had sitting from my last class.  You can see here the others I created with this same sketch for this class.  I really appreciate how wonderful it is to have flexible sketches because by simply changing the papers, the images and the greetings you can make cards that are appropriate for any occasion.  You can also change the orientation of the card, the position of the ribbon, the location of the image to change up the way the cards look. 

These were fast and easy because I was using kits with identical supplies but as you can see these kits still allow a lot of flexibility and the opportunity for anyone to give the card their own twists.  

These will be channeled into my stash, donated to various causes and/or be packaged to create little gifts that I will have on hand for when the need arises.
The background for the cards on the right and left is a digital background from Free Vintage Digistamps.  

I would highly recommend that you make several kits when you make up your next few cards.  These will be available to you when you need a card as the last minute and you will find that you can easily change up the elements of a kit to provide a fresh take on a sketch when you don't make the cards up at the same time.  

Therese

Tutorial - Collaged button

I made several collaged buttons a few weeks ago and thought it would be fun to provide a tutorial to describe the process I used.  

I started with a piece of thick plastic packaging which provides a good substrate for the process and makes a sturdy button.

I used a Sizzix Circle Die to cut a circle.  In this case, I used the smallest circle which is about an inch.  For this one I used the second largest which was 1.5".  

I sanded the edge and one side with fine grit sand paper.  The edge can be a bit rough after cutting so it may need sanding to smooth it out.  Sand the roughest side of the plastic circle - generally the one that has been on the outside of the packaging which leaves the nice smooth side for the good side of your button.  The sanding will provide tooth for the glue you will use for your collage.

Apply glue to the rough side.  I used Dimensional Magic but any clear glue will do.  Spread it over the whole surface being careful to not miss any spots.  If you miss some spots you will be able to see them from the front of the button and the collage will not be adhered properly to the plastic.

For the project I am working on I needed a gold button so I applied gold foil to the back.  Here you can see that the glue is well distributed and makes contact with the foil on the whole surface.  

This foil is combined with the brown and gold paper medallion which I used on a few of my recent cards.  You can check this featured post to see if you can figure out which tasty treat this packaging has housed.  Leave me a comment with your guess!

I roughly trimmed the extra foil and applied small binder clips to the edges.  I did, in this case, include a circle punchie on the bottom side so that the clips would not damage the foil.  It is best to leave this for a few hours or over night to ensure that the glue is dry. 

Once dry, I trimmed the foil to the edge of the circle and sanded lightly from back to front to ensure a smooth edge for my button.  You will likely have to clean the front of your button as well because there will be dried glue on it.  I use my finger nail to scratch off the dried glue as to not damage the front of my button.  

Now, you can use this as a 3D embellishment in your work as it does provide a nicely finished collage element.  Consider using a tag shape instead and make a hole at top instead. 

So many possibilities!!

I marked the holes with a black sharpie marker before punching them.  I am using the standard two holes but you could certainly use four if you prefer.  If you are using yours as an embellishment you could certainly punch the holes near the edges instead and attach it to your project with brads.  

I punched these holes with a 1/16" hole punch.  I used a 1/8" punch on the larger buttons I created.  

Use whatever size suit your purpose. 

Here is my button used on my project.  I layered it over a teal fabric circle and then onto a scalloped circle of sheer gold fabric.  It was exactly what I wanted!!

So I hope you will find this tutorial helpful.  I had been finding that adding buttons to my paper crafting and small fabric projects meant that I had to apply extra postage to send them on their way. 

These buttons have less dimension and therefore do not incur that cost.  The fact that they are artsy and fun is also very cool.  I love that I can make them to suit any project I am working on.  I can certainly see making some that would be used as 3D embellishments instead and be attached to my project in a different way instead of the holes which makes these ones buttons.  

A bonus is that most of the supplies for this project you likely have in your stash!!

Enjoy!  Please feel free to leave a comment if you have enjoyed the tutorial or if you have made up some collaged buttons!!

Therese

Cards created from kits from my last class

I have decided to make up all the card kits I had left over from my last class to augment my stash, to be available for donation to various causes and to make up sets as little gifts which I can use over the year.  I usually prep these gifts at the last minute and I am always in a hurry.  Having them already made up will provide less stress and allow me to provide variety in my cards.
You can check our the cards I made at the class here. 

 I laser printed funky flowers, a leaf, daisies, balloons, a birthday cake, a tulip and a dress. Combined them with decorative paper, a layer of cardstock, some seam binding or ribbon and a strip that was border punched with an eyelet punch (SU). As you can see I varied the papers, the position of the seam binding and even which side the image was placed to vary the cards I made with these identical kits. One is missing the border because I found that card to be better without it.

It is nice to have a few all occasion cards in your stash because they are appropriate for several celebrations and recipients.

These were really fun to make up and makes me really appreciate the speed of cardmaking when a person works with kits rather than starting from scratch.


Therese

Fabric postcard with a butterfly embellishment

This is my second January postcard for the birthday club on my Fabric Postcard group.  We need to have our postcards out to our partners for them to arrive for their birthdays so I needed to get them made as early in December as possible to avoid the Christmas rush both here at home and in the postal system.  I started with small precut scraps and stitched them together to get two rows.  Last time, I did not measure right away and found later that I was short just a bit so I measured and again needed just a bit so I added a strip of brown between the the rows.  I like this option much better.  I decided to use this butterfly applique so I cut out a scallop circle using my Nestibilities out of mottled yellow fabric to which I had already added fusible webbing.  It did not cut as neatly as I had hoped but that was probably because I had not lined up my cutting plate quite right.  I applied my adhesive backed applique to the circle using my iron over some release paper because I had already applied the fusible webbing to the circle.  Before  applying it to the front of the postcard I decided to see what I might want to add as embellishment.  I added a layer of interfacing and then some batting to the back before I stitched down both sides of the middle strip and adding some free motion stitching to the pieces on both sides.  I thought the strip needed a bit more embellishment so I added a piece of orange rick rack and hand stitched it in place with green thread.  It still needed a bit of something but I thought maybe I would work on that after I had added my focal element.  I positioned my scallop circle and applied heat with my iron until it fused to the postcard front.  Next, I added red seed beads to each scallop using yellow thread.  It still needed a bit of something so I added faux stitching with a fine tip permanent marker using a Nestie circle as a guide.  That was much better.  Next, I revisited my rick rack and decided to add red seed beads to each dip and then three french knots above each one.  I am really happy with how that worked out.  I have seen all sorts of wonderful stitching combined with rick rack to create wonderful embellishments on projects.  I should have stamped on my light square before applying my focal element but I forgot.  So I decided to stamp "celebrate" several times and then added the "life" lower.  I used green permanent ink and I am happy with how it turned out.  I added a white backing fabric which I fused to the batting.  Unfortunately, the dark bobbin thread shows through the white but it was fused in place and I was not able to undo it.  I will have to remember to change my bobbin thread to coordinate with the batting next time.  It is a learning curve!!  I trimmed all the layers to 4" x 6" and then added an off white bias tape to the edge.  I am looking forward to learning more about these little art projects and trying some new techniques as I work on birthday postcards this year.  

Scrappy background with a star embellishment

 This is the final card I made with the scrappy backgrounds I created a few weeks ago.  I cut the piece I had into three both ways and glued them equidistant from each other on a kraft card front.  I stamped over all with my stipple stamp (SU) with brown ink which works to unify all the pieces with the card.  I positioned a length of brown twill tape near the middle and tucked a stamped greeting below it and used my sewing machine to stitch both of them into place.  The greeting looked a little plain so I stippled it as well with brown ink.  My focal point is a 3D embellishment which features an punchie star, a scalloped circle and another of those brown and gold paper medallions!!!  You can see here, here and here the other cards that feature these medallions.  Anyone know what tasty treat was housed in them?  Click on the my FEATURED POST on the upper right hand side or click this link and leave me a comment!!  This card is going into my stash.

Therese