Sympathy card from a kit featuring a watercoloured floral image, a layered punchie greeting and an embossed circle

I found another few kits when I was cleaning up my desk and because of the pieces I decided to make up the cards because there was not too much flexibility in the pieces without a bit of a redo of most of them.  They are from my September card making class.
To change it up a bit I trimmed the large circle and embossed it with a soft swirl embossing folder.  I adhered the background paper (stamped decorative paper) and the circle to the purple card front.  I trimmed the image into a rectangle and punched the corners using a little corner punch.  I found this fiber in my stash and ran it around the image and tied it off at the top.  I mounted this focal element to my card overlapping the circle using 3D foam tape.  I had punched a scallop oval out of the circle before adhering it to my card.  I used it to layer the font sympathy greeting which I sponged with a bit of green before layering them.  I mounted the greeting with double sided tape on the top portion and 3D foam tape on the bottom.             Therese

Sympathy card from a kit - embossed resist background, embossed vellum, sequins with brads and a tiny greeting

Needing a couple more sympathy cards!  I made this one up from a card kit from my January class.  It features an embossed butterfly (SU) background which was created using very neutral and pale scrapbook paper, silver embossing powder and watercolour.  It was fun to play with resists again!!  I trimmed the background to fit on a green card and created the focal element by layering a turquoise oval (Nestibilities) with a little white butterfly punchie (SU), an embossed vellum oval which was cut just a bit smaller and green and turquoise sequins on the front and tiny silver brads to keep on the layers together.  I mounted this large element to my card front using 3D foam tape and then added a cute embellished colour printed greeting.  I used scalloped decorative scissors to cut the top edge, added paper piercing with a push pin and then added an embossed line using my score tool.  I used double sided tape on the left hand side which adhered to the oval and 3D foam tape to the right hand side which adhered to the card front.    Therese

Sympathy card from a card kit - TH wildflower die cuts from Hammered botanicals paper, a bit of lace and a layered greeting

We have a service to go to this week and I have prepared the sympathy cards I need from card kits from my last class. I used the Tim Holtz's wildflower dies to cut the flowers on this card from paper produced when I had a go at Hammered Botanicals.  Where the colour was not perfect I simply used watercolour to augment them until they all looked very much like wildflowers.  I added a length of lace to the diamond background paper adhering the ends to the back with double sided tape before adhering this large element to a green card front.  I tied white thread to the lace using a double knot to add some interest and texture.  I used a fine tipped applicator to apply white glue to the back side of the flowers, tucked them under the lace and held them in place for a bit.  I punched the laser printed little font greeting with the Word Window punch (SU) and then layered it onto a coordinating Modern Label punchie (SU) before mounting it to my card front just below the lace and to the right of the flower stems using 3D foam tape.   I love this colour combination and it makes a wonderful sympathy card.  Therese

Sympathy card featuring wild flower die cuts, a bit of lace and a stamped greeting

My uncle passed away just before Christmas and his celebration of life is coming up so I have made up this card for the family. 
I started with the TH wildflower die cut from black cardstock and found a soft gray background in my stash.  I stamped it with a script stamp (SU) in light green.  Next, I added the greeting in black ink.  I tied a short length of green raffia to a length of lace and adhered it just below the greeting securing both ends to the back of background using double sided tape before adhering this large layer to a coordinating green card front. I applied white glue to the back of my wildflower die cut where the flowers are and tucked it in behind the lace. 
It is always good when families get together!! Looking forward to seeing some I have not seen in decades!!

Therese

Sympathy card featuring a sanded white core background, a strip of vellum with an embossed greeting and a glittery butterfly

For this sympathy card, I started with a piece of white core paper which I embossed and sanded very slightly.  I glued this to a layer of coordinating cardstock.  I tore a strip of vellum and embossed the greeting near the bottom edge.  I punched a hole in the background before adding the vellum strip securing the ends to the back of the layer.  I had the vellum intersect the opening just a little.  I glued my large element to the front of a large white card and added the butterfly with 3D foam tape. 

Therese

Sympathy card featuring starry background paper, embossed greeting and strip and glittery butterfly

For this sympathy card, I used scraps from my stash that coordinated with the butterfly and adhered them to a coordinating layer of cardstock.  I embossed a strip of white cardstock, ran my tracing wheel on both edges and adhered it over the gap between the two pieces of colour printed background paper.  I was careful to not put too much glue on the bottom edge so I could easily tuck my little embossed vellum greeting under the edge.  I put a small piece of double sided tape on the top of the greeting to secure it in place.  I added the butterfly with 3D foam tape and added clear glitter to the centers of the elements on the embossed strip.  I glued this large element to the front of a large white card. 

Therese

Sympathy card featuring wild flower die cuts, paste paper background and a glittery butterfly

 In need of a few sympathy cards this week.  This is the first one I made.  I started with the butterfly which is an embellishment I have had for a while.  I found some coordinating paper in my purple container of scraps which are actually paste paper from a while back. I trimmed the three pieces to fit on the front of a large white card and adhered them into place.  I decided to use these wild flower die cuts (TH) which worked perfectly with the paste paper strips.  I used white glue in a fine tip applicator to adhere them to the card front.  I trimmed my little font greeting, sponged its edges and adhered it to the front of the card.  I applied 3D foam tape to the butterfly and adhered it over the edge of the greeting. 

Therese

Cards featuring decorative paper, three embossed layers and a floral embellishment

A few more cards for my stash.  I made these up from card kits which were also featured in my September cardmaking class.  The large decorative papers were glued to the coordinating card fronts and the three pieces of cardstock were embossed with three different embossing folders.  I corner rounded some of the corners to provide a little variety in the look of the layers.  They were arranged on the card fronts to make a pleasing arrangement and then glued in place.  The 3D embellishments were created by layering silk flowers adding punchies/sequins and then held together with a coordinating brad.  These were applied to the cards using 3D foam tape.  To finish off my cards I added the greetings.  Card kits are so quick and easy!!      Therese

Another sympathy card featuring a crocus image with a font greeting, decorative paper and ribbon

I managed another sympathy card and am finally getting to blogging them.  I started with an ivory card and mounted a piece of soft teal decorative paper to it after mounting a gray ribbon across it.  I watercoloured the laser printed crocus image (Uniko) to coordinate.  I added a font greeting to it in a layout program before printing it.  I added yellow to the border with a fine gel pen which nicely echoes the stamen of the flower.  I mounted the image to my card using 3D foam tape and tied on a short piece to the one on my card to simulate a bow.  I am happy with this one!!  Therese

Sympathy card featuring a colour printed decorative paper, ribbon and a layered butterfly and greeting

For this sympathy card I started with a light aqua card and added this colour printed decorative paper (digital image) to which I had added a gray ribbon with both ends adhered to the back with double sided tape.  I found the two butterflies in my stash and added blue foil to the silver one before adhering them together.  I mounted the butterfly to my card front using 3D foam tape.  Next, I tied a short piece of ribbon to the one I had on my card using a single knot to simulate a bow.  I used three punched oval shapes (SU) to create my greeting.  First, a small oval punched greeting, next a large oval punched from the same blue foil as the butterfly backed with a piece of cardstock to give it some structure and finally a large scalloped oval punchie cut from silver cardstock.  After adhering all of them to each other I added it to my card using 3D foam tape.   Really like this one!!!  Therese

A sympathy card featuring a stamped image, decorative paper and a punchie greeting

I had a request for sympathy cards so I made a few.  Here is my first one.  I started with gray cardstock and found this image in my stash which worked well.  I found this swirly paper in my decorative paper which also worked well so I got started.  I cut an opening with my Nestibilities in the decorative paper to accommodate the image.  Wanting the light to be the focus I watercoloured only the light rays that would be emitted by the light house and added a bit of clear glitter to the windows. I adhered the image to a black layer and cut the bottom of that piece using a wavy cutter.  Next, I punched an opening with the Modern Label punch (SU) below and to the right of the other opening.  I added a black ribbon from top to bottom where it intersected both openings and adhered the ends to the back of the decorative layer before gluing the paper to the front of my card.  I mounted the image and the laser printed greeting into the appropriate openings using 3D foam tape.   I like the soft look of this card.  Therese

Sympathy card featuring a calendar page with crocuses and a layered greeting

Another sympathy card for my Mom. For this one I started with a purple card front and trimmed the calendar page to leave the frame image of spring flowers.  I used the scraps to create a border with decorative edges which I cut with deckle decorative scissors.  I added a strip of yellow to join the two pieces, two lines of purple using a purple pen and added a little sponged greeting using 3D foam tape.  Went together fairly quickly once I had all the elements decided!  Therese

Sympathy card featuring a reused card panel, a punched greeting and some ribbon

I made a few sympathy cards for my Mom.  They are at an age that they are often in need of them and she is no longer making them.  I chose a few envelopes and made cards to fit in them.  This one is a light green one and I trimmed this image from the front of a used card just fussy cutting on the to left and then cutting the other portion straight to the edge of the panel.  I used scalloped decorative scissors on the right hand edge and embossed a line using my scoring tool.  I used a push pin to pierce each scallop to add texture and interest.  I punched an opening in the card with the regular oval punch (SU) and then punched a little laser printed greeting with the small oval punch (SU).  I wanted to add a ribbon to the top right but needed a slot behind the layer to bring the ribbon up so I drew a very light line and used an exacto knife to cut it in the front of my card.  I inserted the pink ribbon into the slot from the back (inside of the card front) and the through the opening when I glued my decorative element to my card front.  I was then able to tie the two ends on the front with a double knot.  I sponged the edges of my little oval greeting before positioning it in the opening.  I will make a few more for her.  Therese

Sympathy card featuring a layered butterfly embellishment, organza ribbon and a layered greeting

Friends of ours have lost family members on both sides this week so I made up this sympathy card for them.
I started with a large envelope and created an ivory card to fit inside.  I added a very pale yellow organza ribbon to a piece of scrapbook paper which I trimmed to size and embellished with a bit of script (SU) stamping before adhering it to the front of my card.  To create the butterfly embellishment I started with a little champagne butterfly die cut which I got from my sister, Sylvia.  I found the large butterfly in my stash - it was cut from white cardstock.  I set about modifying it with watercolour and shimmer paint until it coordinated with my background.  Once it was dry, I embossed it with a script embossing folder to echo the script in my background.  I used double sided tape to adhere the two butterflies together and a piece of 3D foam tape to adhere it to my card front.  I created my layered greeting in a similar fashion.  I found the greeting my stash (colour printed & embellished with watercolour) and layered it onto a champagne oval which I had to colourwash just a little to tone down its brightness.  I layered these two onto a white scalloped oval punchie (SU) which I embellished with watercolour and shimmer paint in the same way as the butterfly.  I tied a short piece of the same ribbon to the one on the front of my card using a loosely tied single knot securing it with a piece of double sided tape on the back to ensure it did not come undone.  To finish off my card, I added my layered greeting using 3D foam tape.  It will be on its way today!!            Therese

A sympathy card featuring scrapbook paper with roses, a vellum greeting and a border punched layer

For this card for my stash I started with the piece of scrapbook paper trimming out the image of the roses.  I added the vellum greeting (laser printed) by folding the sides to the back and adhering with double sided tape.  I layered it onto a piece of green cardstock which I border punched on the bottom with an eyelet punch (SU).  I adhered this large element to an oatmeal coloured card.  Was quick to put together once I found all the pieces that coordinated in colour.          Therese

A sympathy card featuring a stamped greeting, a butterfly die cut and a vellum layer

Another stash card!!  I started with the butterfly which was part of a mobile which I received in my birthday card from my daughter a while back.  I tied a length of silver cording around the middle, tied a double knot and trimmed the ends to simulate antennae.  I found a coordinating piece of scrapbook paper, a torn piece of vellum and a coordinating peach card front.  I used a rose ink to stamp the greeting on my card, added the vellum using double sided tape situated where it would be hidden my the strip of scrapbook paper and then adhered the strip over the vellum.  I added the butterfly using 3D foam tape to give it a bit of dimension.         Therese

Another sympathy card - floral image, vellum greeting and a brad

My sister's mother in law passed last week and because of a prior commitment I was not able to attend the funeral this weekend.  I have prepared this card for her and her family. 
I reused a floral image from a commercial card which I trimmed to fit onto a green A2 sized card.  I found a coordinating vellum greeting in my stash which I folded to the back and secured with double sided tape.  I flagged the left hand edge and secured it with a little gold brad.  I glued this large element to my green card.  A quick and easy card that will be sent off today!! 

Therese

Sympathy card - reused butterfly image, embossed layer and a little fiber

My aunt passed away week before last and the funeral was last week.  I had intended to go but was sidetracked with the flu and am now just getting this card out. 
I used a new embossing folder that I bought while I was away.  It is part of a Recollection set - two embossing folders and a small set of clear stamps (Christmas).  Unfortunately, the folder cut the cardstock in a few places which was a bit disappointing.  I repaired from the back and cut the opening out with a Nestibilities Classic Circle die which did the job perfectly.  I put the layer back in the embossing folder to reset the round frame.  Next time, I will cut the circle first and then emboss and will not need to repeat the process.  I tied on a little piece of white fiber between the opening and the right hand edge and mounted a butterfly image in the back of the layer nicely highlighting the butterfly.  I taped it into place before gluing this large layer to a coordinating card front.  I added a small greeting - laser printed Word Window (SU) punchie!!            Therese

A sympathy card that features a butterfly, some fiber and a font greeting

For this sympathy card I embossed the front of my card using the distressed lines embossing folder twice being careful to align the strips and using small piece of cutting plates to limit where the embossing would happen.  I chose a piece of decorative cardstock which coordinated with the colour printed butterfly image (Pixabay).  I distressed the edges of the butterfly image and sponged them with a bit of brown ink.  I mounted it with 3D foam tape to the piece of coordinating cardstock.  To repeat the brown in the butterfly I added a thin strip of brown cardstock to each long edge of this layer.  It still needed a bit of texture so I used my pattern tracing wheel and added a line on each edge of my element.  I tied on a length of white fiber and then mounted my laser printed punched greeting which was sponged to coordinate.  I mounted this large element to my embossed card front to finish off my card.               Therese

Sympathy card that features a small font greeting, a poppy image and a tag

This sympathy card features a wax resist background with some stamped green flourishes (SU) which I made up a while back.  I tore the paper, punched a hole as far up as I could from the bottom using my Modern Label punch (SU) and then adhered the two pieces to the front of a gray green card.  The laser printed digital poppy image is from Calico Collage and was layered onto a gray green cardstock.  The end of the rectangle was not even so I inserted the one end into one of my Deco Label Thinlits and just cut far enough to trim the edge of it to create a tag!  Nice to be able to use tools in a variety of ways!  I punched a hole in the rounded end and tied on a short end of red fiber.  I mounted this focal element to the front of my card over the gap in the decorative paper using 3D foam tape and I also mounted a small font greeting in the opening that I punched which I sponged just a little to softened the edges.    Therese