March Cardmaking - a handmade card featuring a little birdie in a cage

 

Little birdie cards are so versatile because they can be used for so many occasions!!

For our first card for cardmaking this time I decided we would make some!!  I choose decorative paper which had a decorative element on the left hand side and we positioned our little birds with their cages to the right of them.  This used some scrapbook paper which has been languishing in my stash because some of the papers were made for specialty layouts and had decorative elements that were not uniform.  A few more pages cut up and out of the bin!! 

Started by adhering the decorative paper to the coordinating card fronts.  Next, I cut the cages (TH SX) out of coordinating cardstock, trimmed off the finial and manually embossed the top with a round element from a gear embossing folder.  I die cut the birds and then the wings a different colour.  I started with the bird - created a beak with a marker and added a tiny black brad to create its eye.  I did not want mine behind the cage so I positioned it so it had its head sticking between the bars of the cage and glued the lower branch to the back of the cage.  I added the wing next using a little double sided tape.  Next, I added the hanging ribbon through the hole at the top, secured it with tape and slid on the little birdie tag before mounting this large element to my card front using white glue applied with a fine tip applicator.  The little tags were cut with a tag die (SX), stamped with a little stamp from a birdie set (SU) using a stamping jig and then had a little string tied on.  Next, I wrapped the ribbon to the inside of the card and secured it with double sided tape and tied the off cut to the front with a single knot to simulate a bow.  To finish off my card I glued rhinestones inside the holes at the bottom of the cage with white glue and secured my tag with 3D foam tape.  In the end, I added a bit of chalk to the tag to soften its edges.  Some of the girls did not secure the bird cage to the card which left it swinging which was also a nice effect.  It could then easily be removed and hung in a window or reused.  

Therese

Decorative paper with a watercoloured laser printed image of a cross

I wanted a simple cross image for this Easter card so I managed to find one on a clip art site.  As I look at it now, it looks a little off center so I will have to correct that before the next time I use it.  I laser printed the image and watercoloured it.  I layered it onto brown cardstock and distressed the edges.  I found this scrapbook paper background in my stash and it coordinated perfectly so I simply added a blue ribbon that coordinated adhering the ends to the back and then mounted it to a beige card.  I embossed the greeting (SU) onto a watercoloured yellow scrap, ripped the bottom edge and trimmed the left hand side and tucked it below the ribbon adhering it in place.  I offset my focal element so it would just cover the right hand side of my greeting which worked perfectly!!! 

It is always good to be reminded of the reason for the season. 

Therese

Some fun vellum combined with some bright images

These cards both feature a vellum layer!!  The one on the left has some cool bunny vellum which I cut just slightly smaller than my card front.  I created my focal element and positioned it before stamping and embossing my greeting.  The focal element combines a bright laser printed image of Easter eggs (Anji's Antics) which I watercoloured and layered onto yellow cardstock.  I mounted the focal element to the vellum and then applied double sided tape to the back of it where I knew that it would not show through to the front and then adhered this large element to a purple card front.  You have to be really careful when thermal embossing on vellum as the vellum can warp a bit.  You can see that there is a bit of warping even if I was very careful not to apply too much heat for too long.  I am a bit out of practice!!  Really like these bright Easter eggs and I added just a bit of clear glitter gel pen to them as a final touch. 

For my next card, I mounted a hand decorated background paper (watercolour and plastic wrap) in red and pinks to coordinate with my focal image to the front of a purple card. I trimmed the laser printed image (Pixabay), ripped a piece of vellum to frame it nicely and adhered it to the back of the image using double side tape.  I applied double sided tape to the back of this element where it was hidden from the front and adhered it to my embellished card front. 

Therese

Mixed media exchange cards that feature serendipity backgrounds, die cuts and embossing

Wanting to create cards that are a bit more mixed media that my regular cards I dug out my serendipity backgrounds stash and found two in blue, green and brown tones.  These are a little less serendipity in that they feature square edged scraps instead of torn and are generally a little less layered and overlapping. They were embossed with an allover patterned embossing folder - Lattice (SU).  I die cut a leaf (TH SX) out of one and a flower (SX) out of the other.  Because these are the large dies that have three images on each die it required a bit of work.  I have several broken plates for my Big Kick which I use to allow myself more flexibility when I am cutting and embossing.  In the end, I broke one of my half plates in two to get two quarter plates so I could cut these where I wanted on them my background.  It takes a bit of working out so that you can get the small plate positioned to cut only the one die.  For the flower one I used brown heavy white core paper to cut another one and embossed it so that there was some swirls and a bird, sanded it a bit to reveal the white core and then added ink to help it coordinate with the background.  I cut a dark yellow center as well which I dotted with a gold gel pen.  I inserted the center into the flower and held it in place with regular tape and did the same with the flower into the background.  I used a border embossing folder to emboss the leaves on both sides and highlighted the embossing with green ink.  I used a bit of watercolour afterwards to make some of the leaves more solid.  For the leaf, I used the coordinating embossing folder to emboss brown cardstock with the leaf shape, added some colour and finally a bit of gold embossing powder to give the leaf added texture.  I mounted the leaf behind the hole in my background and then used a swirl embossing folder (TH) with the small plates to emboss three of the corners which I highlighted with green ink as well.  I layered these large elements onto coordinating layers (gold for the leaf and yellow for the flower) and then onto coordinating card fronts before machine stitching them all the way around.  Very happy with how these turned out and they are headed to my partners in today's mail!!!

Therese

REUSE - Hand decorated gift bags reusing banana bags!!

I needed some gift bags for Easter gifts this week and thought I would give a go to making my own from the bags that discounted bananas come in at the grocery store.  I always keep these because they are really handy for packaging garden produce for passing onto neighbours and friends.  So I dug a couple from my stash and decided I would create a bit of a collage on the front using scraps from my serendipity box.  I used some thinned white glue to adhere all of my scraps to the front of the bags which nicely covered up all the writing on them.  Wanting to unify the collage a bit I decided to glue a paper napkin (just the top layer) over my collage.  You can see the napkin - green stipes - at the top of the photo.  It was much to bold so I used the second to last layer of the paper napkin instead.  You can see that it worked much better and the subtle pattern really allowed the collage to show through.  I added layer of glue over the whole front and pressed the paper napking layer into it.  For my last layer of glue I used some thinned gold glitter glue that I found in my glue bucket.  Love the look!!  Just a bit of nice glitter overall and the whole front is nicely sealed.  On hindsight, the next time I will cover the handle on the front as well.  For these ones, I will be adding some doodles on the handles to make them coordinate a bit better with the whole look of the bag.  

Very happy with how they turned out and I really enjoyed making these quick collages this morning!!

Therese

Beautiful crocus paper for Easter cards

I love this crocus paper for Easter/spring cards!!  This is almost the very last of the paper I have which has been my go to paper for these cards for many years!!  Not sure if it is still available anywhere!!  I may have to find a new favorite!!

For my first card, I cut my background with a slit - 1 3/4" from the right hand side half way up and then folded the flap up.  They were plain white on the back and I thought they needed a bit of something so I added little rectangles of a subtle patterned paper to make them more interesting.  I like how it looks.  Next time I will glue a strip of paper to the back before I cut the paper which will help to get everything lined up and create a nicer fold.  I used a small piece of double sided tape right near the fold to keep the flaps open.  I added a piece of purple ribbon from the folded area to the outside edge and adhered the ends to the back of the paper using double sided tape.  I embossed (SU) the right hand edge of a yellow card and then added my folded background.  I watercoloured my laser printed digital greeting, layered it onto a purple scalloped circle die cut and mounted it over the end of my ribbon using 3D foam tape.  I added a bit of clear glitter to the flowers and the line on the greeting.  

For my second card, I used two small scraps and taped them together on the back to created a full background.  I glued it to the front of a green card and added a ruffled ivory ribbon gluing the ends to the inside of my card with double sided tape.  I created an opening on my spine using a slot punch by just punching off a sliver.  I added some purple and white bakers twine over the center of the ribbon which worked out quite well.  I used regular tape to secure the ends on the inside front.  I watercoloured my laser printed punchie greeting and mounted it over the ribbon just a bit to the right as to not cover up the yellow crocus.  Again, a bit of clear glitter was added to the greeting to give it a bit of fun!!  

Therese

Fussy cut pansy fabric with an gold embossed greeting

I have had this pansy fabric for a long time and have used much of it for making cards by applying a fusible webbing to the back.  I found these two scraps in a box of spare parts I had not been through in a while and thought they would make wonderful Easter cards.  I fussy cut the edges around the flowers to give myself room for the greeting on my black background.  This fabric does better on a white background because it makes the colours pop where as the black dulls it a bit.  None the less I really like the gold embossed greeting (SU) which highlights the gold in the fabric.  After embossing the greeting I positioned the trimmed fabric and carefully ironed it onto the background.  I had to be careful not to touch the embossing powder because it would have melted to the iron.  I added ribbon to the other end of my fabric (yellow on one and purple on the other) and tied on a short piece to the longer length to simulate a bow.  I glued the one to a yellow card and the other to a purple card.  As you can see the fabric is very versatile and can be used in both orientations!!!  Very happy with these cards!!  I will have to keep an eye out for more fun fabric for my card making!!

Therese 

Piano card for my grand daughter

We went out of town last week to see our oldest grand daughter's first piano recital.  She just started piano lessons in the fall and her teacher felt she had improved enough to participate!!  I wanted to let her know that we were proud of her and "good on her" for doing well with her piece. 
So I decided to make a musical card for her and I found this piano card  tutorial on line which seemed pretty straight forward so I decided to give it a go.  I started with a black card base.  I cut a piece of white cardstock and added black lines with a permanent marker.  I used this method of marking even spaces on a piece of paper using a ruler and it worked perfectly to define the white piano keys.  I found some small scraps of black cardstock and cut them about 2/3 of the white piece and used double sided tape to glue them over the lines.  I was sure to put them in the correct order by finding a piano on line and duplicating the pattern.  I hand drew the grand piano shape and trimmed it with scissors.  I printed the sheet music offered in the tutorial and glued it to the inside of the card.  I added a small insert on the inside front of the card to write my note!!  Very happy with how it turned out!! 

Therese

Easter card with a ribbon cross and printed greeting

My first Easter card!  I used a piece of packaging for my background - beautiful yellow and white stripes!!  There is a joint below the ribbon vertically and I angled the black gros grain just a bit so it is still covered by the ribbon.  I added a piece across horizontally to create a graphic cross on my background.  I really like the effect!!  I glued this background to a blue green card which coordinates with my greeting.  I really wanted to layer this round colour printed greeting but I could not find a layer colour that did not distract from the cross so I put it on without one using 3D foam tape to give it a bit of dimension.  A simple card with a simple message!!  Love it!

Therese

A set of handmade cards with fun background paper

 In an effort to expand my repertoire of card sketches that feature decorative paper backgrounds I decided to see if I could come up with a set of cards using four backgrounds cut from the same sheet of decorative paper.  I trimmed my backgrounds and set about finding coordinating cardstock for my card bases.  With that done it was just a matter of finding sketches that would work.

For my first card, I added a length of green ribbon and layered on a floral focal element which was constructed using diecuts/punchies.  I die cut the petalled flower and manually embossed the petals before adding a green circle punchie and then an embossed pink center.  I added a sponged laser printed punchie greeting to the lower left hand side to finish off my card. 
My second card started with the same background to which I added a dark maroon strip of embossed cardstock near the bottom.  I die cut the word "happy"(SX) in green and mounted it to the left hand side of the maroon strip which left just enough space on the right for my little "birthday" which I fortunately was able to tuck under the maroon strip. 
For my third card I chose to cover the only bright red on my background with my layered focal element which gives this one a bit of a different look.  I layered a green "hole" of a flower punchie over a maroon scalloped circle punchie and then embossed the petals before adding a pink circle punchie in the center to finish off the flower.  I added a light green ribbon across the middle of the background paper before gluing it to my green card front then adhered my focal element over the end of it using 3D foam tape.  The background paper details support the idea of the focal element being a flower. 
For my last card I decided to try a technique that I have seen quite a few times on Splitcoast Stampers  which involves cutting the decorative paper on the center about one third way in on the right hand side.  I measured 2 5/8" up and 1 3/4" from the edge of my 4" x 5.25" background and cut the paper with my exacto knife.  Next, I scored between the end of the line and both corners so I would get a neat fold.  I gently folded the flaps up and used a tiny piece of double sided tape very near the fold to keep the flaps from springing up too much - just enough dimension and texture!!  I added a ribbon across the middle from the end of the cut to the outside edge gluing the ends to the back with double sided tape.  The cardstock in the "v" needed a bit of something so I manually embossed that area with a distressed strips embossing folder.  For my embellishment I die cut a small red petal flower, added a green center and two embossed leaves before adhering it over the end of the cut with 3D foam tape. 
Very happy with my challenge and did manage to find some sketches that worked with my backgrounds.  I like that with these busy backgrounds I feel that the card don't really need greetings.  My favorite is the one with the flaps - a great sketch.  Will be using that one again!!

Therese

Card set #4 - washi tape/decorative paper backgrounds with 3D embellishments

For my final set of cards I have these warm and bright washi tapes combined with a very subtle off white and beige scrapbook paper for my backgrounds which I have mounted to off white card fronts. 
For my first card I again went with a bird theme.  I die cut a portion of the bare tree (TH) using a scrap of brown cardstock, trimmed it to fit and adhered it to my card front.  I punched a bird from red cardstock, coloured in the beak and added a tiny black brad for the eye.  I punched the wing from brown cardstock, manually embossed it and adhered it to my bird.  I added the bird to my card using 3D foam tape. 
For my second card I die cut the butterfly from yellow and manually embossed its wings, added a paper butterfly from my stash and layered onto it the brown body/antennae die cut (QK) from a different butterfly die set.  I adhered it to my card front using 3D foam tape and added a dotted flight path using a fine tipped permanent marker.  

For my third card I die cut a large flower using the Tattered Flowers die (TH) from maroon cardstock and added some texture by colour washing the petals with watercolour.  I fussy cut this cute laser printed button, used a black marker on its edges and watercoloured it yellow to coordinate with the background before adhering it to the center of my flower using 3D foam tape.  I hand cut from green scraps a stem and two leaves, glued them to my card front and then adhered my flower over the end of the stem.  To finish off my card I colour washed the stems as well for a bit more texture.  

For my fourth and final card I went back to my heart theme and layered several heart die cuts.  I started with a red heart, layered on one with musical notes and finally added a smaller one cut from gold card and manually embossed.  This heart focal element was added to my card front using 3D foam tape.  

I have so enjoyed making these four sets of cards!!!  I love the collagy look of them and that they are very versatile.  I may consider using this concept again for my card making in the future when I am looking to make cards without greetings.  I still have a small stash of washi tape that needs to be used up and certainly strips of paper would likely have the same effect.  Got some of those as well!!  

Therese

Card Set #3 - collaged washi tape with 3D embellishments

Feeling very positive about the results of my first two sets of cards (set 1) I worked on this set!!
I started by gluing my washi tape/decorative paper backgrounds to white card fronts. You can see that the decorative paper has subtle script and design elements.
For my first card, I decided on a layered heart embellishment!! It is such a versatile element appropriate for birthdays, anniversaries, thinking of you, etc.  I started with a small decorative paper die cut which I layered onto a serendipity heart die cut and then onto a large manually embossed heart die cut.  I machine stitched them together with yellow thread gluing the ends to the back with regular tape.  I mounted this heart focal element to my layered card front.
For my second card, I started with a small brown flower punchie, added it to a blue flower punchie made from hand decorated paper and then layered that over a green embossed die cut flower.  I used a manually embossed five petal punchie (SU) in white as the base and tied them all together using a tiny silver brad.   I adhered this floral element onto a manually embossed scallop circle die cut (N) with paper pierced scallops before mounting this focal element to my card front using 3D foam tape.

For my third card, I decided on another bird because it lends itself so well with the " a little bird told me..." saying which is a good lead in for almost any occasion.  I punched the bird (SU) from blue cardstock, coloured in the beak and added a tiny black brad for the eye.  I punched the wing from silver card and manually embossed it before adhering it to the bird.  I punched the branch from green cardstock, mounted it to a pierced and manually embossed scalloped circle (N) then mounted the bird above it using double sided tape.  I added the folded piece of ribbon to the back using double sided tape and then mounted the whole element to my card front using 3D foam tape.  

For my fourth card, I layered four stars  (green manually embossed, clear plastic, dark blue, lighter blue), added a green sequin and tied them all together with a tiny silver brad.  This focal element was mounted to my layered card front using 3D foam tape.  Stars are great for many occasion including birthdays, special accomplishments and new babies!!

Really loving this process and finding that these cards stand on their own without greetings.  

Therese

Card set #2 using collage washi tape backgrounds and 3D embellishments

I am working through the backgrounds I created using decorative paper and washi tape to make sets of cards for gift giving.  You can check out the first set I made here.  For these cards I used a off white and green decorative scrapbook paper that has a somewhat watercolour/tie dyed look.  I trimmed the paper to fit on my off white cards (just a bit smaller than A2), glued all my backgrounds to my cards before getting started on my embellishments.
For my first card, I took inspiration from my other set and created a layered heart embellishment.  I used a serendipity heart die cut which I found in my stash, layered on a tiny red heart die cut and then machine stitched them together using yellow thread gluing the thread ends to the back with regular tape.  I dug through my stash and found a green die cut scalloped circle which was sponged around the edges which coordinated nicely.  I manually embossed some texture using an element from one of my floral embossing folders and then mounted my heart element to it with double sided tape.  I mounted my heart focal element to my card front using 3D foam tape.
For my second card, I die cut part of this bare tree (TH) from brown cardstock and mounted it to my layered card front.  I punched the bird (SU) from blue cardstock, coloured in the beak and added a tiny black brad to create the eye.  I punched the wing from shiny silver card and manually embossed it with a round element before mounting it to my bird using double sided tape.  I mounted the bird just touching the branch using 3D foam tape.

For my third card, I thought I would give a nod to Christmas and created a little tree embellishment.  I dug the green tree from my stash (a die cut shared by a friend) added a triangle of red in behind which shows through all the opening and added the gold sequin star using a tiny gold brad.  It still needed a bit of something so I used a clear glitter gel pen and highlighted all the scallops and added dots all over the tree.  Once finished I mounted my little tree embellishment to my card front using 3D foam tape.  

For my fourth card I created a star embellishment by layering a silver sequin over, a yellow star die cut, over a clear star die cut over a manually embossed light green star die cut and holding them all together with a tiny black brad.  I layered my star onto a red circle punchie and then paper pierced around the edge with a push pin before mounting this focal element to my layered card front.  

This process has been very enjoyable!!  Looking forward to working on the other sets!!

Therese

Woven paper strips to create a background!!

This is the last kit to be made up from the bunch I found on my desk a while back!!!!!!!!!!  This one featured strips of paper, a greeting and embellishment which were laid out differently for this card.   I wove the strips together and then laid this large element over the ivory cardstock background and glued all the ends into place before trimming them off to the edge.  I mounted this background to my peach card, inserted and trimmed my greeting and mounted the 3D embellishment  ( punchie/sequin) to one end of it.  As an after thought I decided to use my tracing wheel on my greeting.  It worked out pretty well but is much more difficult to do once the greeting is already mounted to the card.  I love how this one turned out and it exemplifies the versatility of card kits!!  You don't have to follow the original instructions  - you can just do your own thing!!!!            Therese

Colour blocked background with a new greeting and some leaf die cuts

One of the last kits to be finished off from my desk.   I used this colour blocked background and relegated the chalk board greeting to my stash.  I added the embossed background to a green card front and went looking for a greeting.  I found this laser printed one (Beccy's Place) which I have found difficult to include in my cards for some reason but it worked perfectly for this card.  I trimmed the greeting and flagged both ends, layered it onto yellow and flagged both ends again before watercolouring the flower and leaves.  I mounted this greeting with a bit of 3D foam tape in the middle and double sided taper on both ends which gives just the right amount of dimension and allowed me to tuck in my leaf die cuts.  I die cut the leaves (SU) from white cardstock and tuck a full one above the greeting and trimmed off the leader from the other and tucked it below the greeting.  I glued them in place with white glue applied with my fine tip applicator.  I love how it turned out!!!!!              Therese

Cards with fun collaged washi tape backgrounds embellished with 3D layered elements

 I have decided to make several sets of cards to give as gifts and was really pondering what I should use as my backgrounds and if I should include any greetings.  Cards without greetings are always more versatile in that they will be appropriate for more occasions but they need good sketches to work.  Because I had washi tape sitting on my desk I decided to play a little and see if I could make up a few backgrounds.  In an effort to reduce the size of my paper stash I wondered if it would work to use decorative scrapbook paper for my backgrounds.  I went looking through my stash and found a few sheets that I thought might work as they were somewhat subtle in pattern and intensity of colour.

So I cut up this sheet of paper - a checkered background with quite a few different colours finely spattered over it.  Next, I checked out my washi tape supply and found a few that worked reasonably well with the paper.  I simply cut or tore the washi tape into strips and applied them to my trimmed pieces of decorative paper.   While, I was at it I made four sets of backgrounds using four sheets of decorative paper.  I put those to press and started dreaming up some embellishments that would be substantial enough to balance the backgrounds I had created, large enough that they would not need greetings and versatile enough in subject matter that they would be appropriate for more than one occasion.  I started by digging out any dies I had that fit the bill as to size and subject matter - hearts, flowers, butterflies, birds, etc.
For my first, card I layered three different sized hearts. The large one is a die cut (CB), the middle one is an embossed heart die cut (SU) and the final one is die cut (SX) cut from white solid core cardstock which I embossed and sanded.  I put just a bit of glue between them to hold them in place and machine stitched them to each other adhering the thread ends to the back with regular tape.  I glued my background to an off white card (a bit smaller than A2) and then adhered my 3D embellishment to the card front using 3D foam tape.  That worked pretty well!!  Now the challenge was to see if I could come up with a few more embellishments that worked as well.
For my second card, I cut a maroon flower (SX), manually embossed it with the Swiss Dot embossing folder (CB) using a hammer, added a manually embossed circle in the center then two leaf punchies which were also manually embossed and mounted this focal element to my card front to which I had already mounted my washi tape background.
For my third card, I mounted my washi tape background to my off white card and then worked on my embellishment. I cut this paisley pattern (SX) from both dark pink and yellow.  I swapped the pieces to create a yellow paisley with a dark pink heart and a small yellow heart and secured them with tape on the back.  The holes were too hard to situate so I simply cut a dark pink shape that was just smaller than the whole and glued it to the back and shows in all the holes.  Decided that it looked a bit like a cute bird with a heart wing and added a tiny black brad for an eye, a tiny brown triangle for the beak, swirly wire tail feathers and mounted it to my card front using 3D foam tape.  Finished it off by adding two legs with a black permanent marker!!
For the fourth card in this set, I die cut a butterfly (SX) from yellow cardstock and overlaid a paper butterfly that I had in my stash and to finish it off added a body and antennae that I die cut (QK) from a butterfly die set.  I glued them together just in the middle so the wings would be free to flutter.  Added it to my layered card front using 3D foam tape and used a black permanent marker to add a dotted flight path.
I am pretty happy with how this set of cards turned out!!  So I will continue to work on my other card sets and will share them here as I finish them up!!

Therese

A bright and colorful baby card using an ink and photo paper background

I am finishing off the last of the card kits I found on my desk.  This was a quick and easy card which was made faster because it was a kit!!  I glued the colour inkjet printed (black) digital image (Melonheadz) of a little clothesline onto the laser printed greeting layer and then mounted this large focal element to the front of a stamped pink card. The heart background (SU) was stamped in a darker pink.  I did highlight some parts of the printed image with a bit of pink watercolour.   The colourful background was created using colour inkjet cartridges and glossy photo paper.             Therese

A light hearted St. Patricks' Day card featuring an inked background

A fun and light hearted St. Patrick's Day card.  I often have to work on getting out of my comfort zone in my card making so I went with a fun inked background which I created with used ink cartridges from our inkjet printer and glossy photo paper.  It was a blast to make these papers!  You can check out the fun here.
I toned down the brightness a bit by stamping over it using a darker green ink and a flourished leaf background stamp.   I added a length of bright green organza ribbon to the background before adhering it to a green card front.  I tied on a short length of the same ribbon using a single knot which simulates a bow.  The greeting is a digital one I created last year using Corel Draw, laser printed and punched out.  I layered it onto a dark green label (SU) and then mounted it to my card front using 3D foam tape overlapping the ribbon.  As a finishing touch I added a clear rhinestone to the center of my shamrock.   Happy with my creation!!                   Therese

Cards from kits that feature a tag, seam binding and watercolour!

In a effort to finish all the card kits I found on my desk I made these two up which use the same sketch.  I watercoloured both laser printed images of flowers in a vase (Anne's Cards) and sponged the edges of the tag.  I trimmed the bottom edge of the greetings and sponged those as well before gluing them to the back of the tag.  I added the seam binding using double sided tape.  I mounted the decorative papers to the front of my coordinating cards and added the embossed cardstock strips over where they join.  I adhered the tags I had prepared onto my card fronts using 3D foam tape to get them a bit of dimension.  I trimmed the ends of the seam binding after they were mounted to the card to ensure they fit within the boundaries of my cards.  Always love how these turn out!!!                Therese

Hearts create a shamrock for St. Patrick's Day card

St. Patrick's Day is coming up next month and I thought I would get a few ready! I made a few of these last year which feature layered hearts which create a shamrock.  I punched the large hearts (SU) and sponged their edges.  I die cut the smaller hearts (CB), layered them and stitched them together.  I created a layered background using several strips of green decorative paper and adhered it to a green card front.  I positioned the hearts to create the shamrock and then hand cut a stem which I also sponged.  After I was happy with the placement I adhered them all to the front of my card and added a little clear rhinestone in the center.  I trimmed the laser printed greeting from my stash, sponged its edges and adhered it to the front of my card just below the focal element.  I added two little rhinestones to the greeting as well.  Love these heart shamrocks!!

Therese