Christmas gifts - felted wool coasters

I usually send my friends little gifts in their Christmas cards and in the past I have sent handmade ornaments.  This year I made felted wool coasters.  My daughter has gifted me with bags full of wool - some felted, some not and a few weeks ago I started going through the bags to see if I could make use of any of it for gifts for this year.  I did a bit of internet research and found a few small projects that would be conducive to the supplies available and the time I had.  So with a few pieces of this duplex ivory/tan felted wool I decided to make some coasters.  I cut the felted wool into 4" x 4" squares using my rotary cutter, clear ruler and my cutting mat.  Makes the job pretty quick.

 I used wool fiber from kits which I have purchased here and there when I found them at thrift stores or yard sales.  I chose a simple floral design and embroidered it on my coasters.  I was careful not to go too deep into the wool so that the threads did not show on the back side.   I used the back stitch for the stems and then just running stitch for the branches.  The flowers are french knots.

I made five for this time around but have fabric for making more.  On the first four in used different greens for the stems and branches and used lavender, blue, pink and red for the flowers.  On the last one I used brown for the stem and branches and orange for the flowers.  I added decorative machine stitching to the edges though it is not necessary.  I used contrasting thread - darker on the front and lighter on the back.  I used a three stitch zigzag which worked out really well.  I was careful to line up the stitching when I connected back to where I started.  I tied off the ends and used a needle to hide them into the felted wool of the coaster.  I am super happy with how they turned out!!!!  Looking forward to inventing a few more flower patterns to go on the next batch.    Therese

Christmas cards - swirly trees, decorative paper and some different embellishements

I had a stack of these images which I put aside when I was getting ready for one of my classes.  So when I was making up Christmas cards to get enough for what I needed for this season I decided to make them up into cards.  As you can see I used decorative paper in a variety of ways to create the background I needed for them.  I had printed both green and red trees which were digitally manipulated before printing.  Love the versatility that this process provides.  I did use my tracing wheel on all the images because I love the texture added by the fun little lines of holes!! They were all mounted to coordinating rectangles of cardstock and adhered to the card fronts using 3D foam tape.
For the top left:  I used a piece of decorative paper 4" x 5.25", added bits of ribbon to the right hand side of the image before adhering it to my card front.
For the top right: I cut the decorative paper in two and added a strip of embossed cardstock in between.  I did flag both ends for more interest.

For the one on the left:  I cut the decorative paper into four pieces and mounted it to the coordinating card front then added green strips in between.
For the one on the right:  I tore the paper twice before mounting to a coordinating card front.

For the one on the left:  I tore the paper twice before mounting to a coordinating card front and added a strip of coordinating cardstock which I had embossed and flagged both ends.
For the one on the right:  I combined strips of cardstock to make the layer behind my image and added gold embroidery thread to my image gluing the ends to the back before adhering it to my card front with 3D foam tape.




So a few more cards for my stash which will be sent off to those on my Christmas list this year.

Therese

Christmas card - digital Merry Christmas, ribbon and some torn decorative paper

This card was a sample created for one of my Christmas card classes which was modified to be more class friendly.  I removed the ribbon and added a strip of embossed cardstock of which I have much more options for colours.
For this card I colour printed the digital image onto white cardstock and trimmed it to 2.75", added lines of texture with a tracing wheel and then mounted it to a coordinating square of cardstock.  The 4" square of decorative paper was torn in two and the two pieces were mounted to a coordinating card front that was previously embossed and sponged.  I added short lengths of ribbon to the right hand edge of my image/greeting and then adhered it to my card front using 3D foam tape over the gap in the decorative paper.  I like the texture added by the ribbon!!    The colour of this image was digitally manipulated to provide several options for colours which made it versatile for the class.       Therese

Christmas card - swirl wreath digital, decorative paper and some bling

I created this card as a sample for one of my card classes and after a bit of evaluation when I was preparing kits I decided to modify the design a bit to make it more class friendly.  I did make up the samples well in advance of the class due to my other commitments and before I had any idea how many would be attending the class.  So this one was added to my stash and will be sent to someone on my Christmas card list.
I started with decorative scrapbook paper  - a 4" square.  I tore it in two and found a coordinating card front.  After a bit of consideration I decided to emboss the area in the gap before adhering the two pieces - one on top and the other at the bottom.  I colour printed the digital swirly wreath image onto white cardstock, trimmed them to 2.75" and added textured lines to them using my pattern tracing wheel.  I mounted the image to a coordinating square of cardstock.  Wanting to add a bit more interest I punched a label using the Decorative Label punch (SU) from red cardstock, cut it in half and embellished each half using a glittery rhinestone and dots from a clear glitter gel pen.  I mounted these to the back of my image before adhering this large element to my card front using 3D foam tape.  Love the look of it but it became impractical for the class due to the amount of small pieces.  The digital wreath was digitally manipulated which produced some in a variety of colours.  Makes it coordinate with a variety of papers that way!!             Therese

Christmas card - swirly tree digital image, decorative paper and some texture from a tracing wheel

This is another sample I had prepared for one of my classes which was dismissed due to the amount of people signed up for the class.  I features a digital image of a swirly tree which was colour printed on white cardstock, trimmed to size and then embellished with a tracing wheel to give it a bit of texture before being layered onto a coordinating rectangle of cardstock.  The 4" square of decorative paper was torn in two and the mounted onto a coordinating card front which was embossed with a Swiss Dot embossing folder.  The large focal element was mounted to the card front using 3D foam tape and positioned over the gap in the paper.
The digital image was manipulated digitally to create both green and red trees.  Fun to be able to change the colour of an image digitally which make is it much more versatile!

Therese

Christmas card class - Colour printed digital greetings, scrapbook paper and an embossed flag ended strip

For this card we started with a 4" square of scrapbook paper which we tore in two and then adhered to a coordinating card front.  The colour printed digital greeting was embellished with a pattern tracing wheel to give it a bit of texture and it was then mounted to a coordinating square of cardstock.  We had the option of using the distressing tool on any of our edges which is featured on the blue card.  Each kit had an embossed strip of coordinating cardstock which could be modified on the ends and was adhered over the gap in the decorative paper.  The greeting/focal element was then mounted over the strip using 3D foam tape to give this card a bit of dimension. The digital image has been digitally manipulated to vary the colours which allowed it to coordinate with a wide variety of papers.  As you can see this kit could be made up in the portrait or landscape format.  A very flexible sketch which can be made up in a wide variety of papers and colours.           Therese

Christmas card class - scroll frame on coloured cardstock, decorative paper ovals with embossed tree die cuts

For this card, I started with oval die cuts (Nestibilities) cut from colour printed decorative paper which was part of one of my previous Christmas card classes.  I chose coordinating cardstock and embossed the quarter sheets with the Swirl Frame embossing folder and them trimmed them to 4" x 5.25" ensuring I did not cut off any of the design.  The decorative ovals were glued inside the opening in the embossing on the cardstock and then embellished with little embossed tree die cuts (SX).  We added the little silver star sequins with a silver brad and then adhered this large element to the front of white cards.   These did not have any greetings on the front but included a Christmas greeting on the single panel insert glued inside.             Therese

Christmas card class - sponging through stencils, silhouette images and some embossing

For these cards I laser printed a compilation of silhouette digital images and a greeting onto white cardstock and trimmed them down to 4" x 5.25".  I embossed the top edge and side with a Christmas embossing folder that features swirls and snowflakes for the trees one and used the an embossing folder that features ornaments for the others.  At class I provided a variety of inks pads with sponges along with circle stencils which were created using transparency plastic and Nestibilities Classic Circle dies.  We secured our cardstock with painters tape and then positioned the circle stencil over the area of the image we wanted to highlight.  Next, we slowly started sponging on ink in a light handed circular motion.  We were able to mix colours and create a night sky that complimented the card front.  Once finished and dry the images was adhered to the card fronts and clear rhinestones were added to embellish the embossing.  The sponging is almost magical as it develops and enhances the printed image.  Love how they turned out!!        Therese

November cardmaking - torn paper, an embossed strip and a colour printed gift focal element

For these cards, we started with 4" square of decorative paper.  The left hand card features scrapbook paper and the one on the right is colour printed digital paper (SU).  Each one has been torn and adhered to a coordinating card front.  The gift image has been digitally manipulated to produce a variety of colours which coordinate with a wide variety of papers.  The gift images were trimmed to 2.75", textured with a tracing wheel and/or a distressing tool and then mounted to a square of coordinating cardstock.  Each kit had a strip of embossed cardstock which was trimmed and mounted over the gap in the decorative paper and then the gift image element was mounted over the strip using 3D foam tape.  Each kit included a single sheet panel insert which featured a Christmas greeting.  A few more examples below. 

Therese

November Cardmaking - embossed swirl frame, a decorative paper oval die cut and a die cut ornament hanging from a sprig of green

For this card, the embossed quarter sheets of coloured cardstock were embossed with the swirl frame embossing folder and then trimmed to include the whole embossed design.  These were coordinated with the decorative colour printed ovals which were die cut for a previous Christmas card class.  The ovals were glued inside the embossed design.  The little ornaments were cut from coordinating cardstock using a Nestibilities set and embossed using the center element from a Christmas tree embossing folder.  The ornament was adhered onto the oval using 3D foam tape.  After positioning the little branch punchie (MS) I drew a line from the ornament up a bit so they intersected with each other using a fine tip black marker.  Next, I glued the branch to the back of a small silver snowflake confetti and then added a small piece of 3D foam tape and adhered it on the edge of the oval in a way that it also intersected with the line I drew above the ornament.  In some cases, I also attached the snowflake with a silver brad which replaced the piece of 3D foam tape.  I adhered this large element to a white card front.  These were made up in a few colour combinations which coordinated with the decorative paper ovals.          Therese

November cardmaking - sponged circles on laser printed images with some embossing on the edges

For these cards I printed a variety of silhouette digital images in black onto white cardstock and trimmed to 4" x 5.25"  This image is a compilation of several images from CLKER to which I added several wavy lines to create a bit of a horizon.  Once trimmed I emboss the images with several Christmas embossing folders just using the areas of the embossing folders that worked for each design.  Each person was supplied with a circle stencil which was created using a quarter sheet of transparency plastic from which a central circle had been cut using Nestibilities Classic Circles dies.  They secured their cardstock with some painters tape and then positioned the stencils over the area of the image they wanted to highlight and secured that with painters tape as well.  Next, they used a variety of little sponges to add colour to the open area of the stencil which created  a beautiful circle on the image.  We used 1" sitcky note circles to create white "moons" in our landscapes as well.  I used the edge of torn paper to create a bit of interest just above my horizon line which sort of mimics mountains and/or clouds and used several coordinating colours of ink to get a beautiful circle.  To finish off the cards we glued our layers to coordinating card fronts and embellished them with clear rhinestones.  

Therese

Christmas card - gold holly and greeting with an embossed background and some red fiber

I found these two elements in my Christmas card stash.  I cut them from a used card that was donated to me for cardmaking.  I wanted a textured background so I embossed an off white quarter sheet of cardstock with the poinsettia embossing folder from StampinUP.  I trimmed it to fit on an A2 card and tied red fiber to it before mounting it to a red card front.  I mounted the gold holly image to my card using 3D foam tape and overlapped the fiber.  I added the punched greeting using 3D foam tape on the right and double sided on the left.    Therese

Christmas card - branch tree image, gold embossing and a simple sketch

I am still making Christmas cards!!  This one reuses a simple card front which I thought was most elegant in its simplicity.  I stamped and gold embossed a Merry Christmas greeting and used an embossing pen to highlight the star and added gold embossing powder to it as well.  I trimmed it to fit on an A2 card, added a layer of red cardstock, then a layer of gold before adhering this large element to a green card. 
Quick and easy!! 

Therese

Christmas card - embossed decorative paper and ornament die cut, oval image and greeting with gold ribbon

For this Christmas card I started with the little oval image of an angel which I die cut (Nestibilities) from the back of a used Christmas card.  I sponged the edge in green and then mounted it to an embossed and sponged kraft ornament die cut (SX).  Really like how that worked out.  I found a piece of coordinating scrapbook paper which had subtle music notes on the top.  I used a musical embossing folder to enhance them and then sponged the area with brown and green ink.  I added gold ribbon to the neck of the ornament and a short piece to the back ground paper using double sided tape to secure the ends.  I adhered the background to a green card front.  I mounted the ornament over the end of the gold ribbon using 3D foam tape.  I sponged the edges of a little oval greeting (SU) which was stamped using a NOEL stamp from Quietfire before punching.  I mounted the greeting to a scalloped oval (SU) punched from the same green as the card.  I mounted this element to my card using 3D foam tape.              Therese

Christmas cards - embossed border, layered snowflakes and some bling

A friend called me tonight wondering if it might be possible to get a few Christmas card kits because she was short five!!  Being in the process of getting kits made up for my class I went looking for a few extra supplies and assured her I could get five kits made up for her.  I used what I had on my desk and made up some new snowflake embellishments which were a bit quicker than the ones I have planned for later.  I used a silver brad, added a blue sequin, a white snowflake punchie (MS) then a larger blue snowflake punch (MS) to finish off my 3D embellishment.  In my snowflake stash I found some of the smaller snowflakes which were just the right size to offset the larger one. I did not have enough for the five kits so I die cut a few extra.  I added bling to their centers and used my clear glitter gel pen to highlight the arms.  The blue layer was embossed with the swirl embossing folder and then it was adhered to a white card front.  The oval was die cut from colour printed decorative paper (Nestibilities) and adhered in the center of the embossed design.  I mounted the large snowflake element using double sided tape and then used 3D foam tape to adhere the small ones.  I like the way these turned out!  Maybe I will be changing my design for the class!!    Therese

Giving Tree tags

These tags are for our Giving Tree!!  I die cut the red circle using my Nestibilities dies and then

I cut a hole at the top using my Cropadile.  Added yarn for the hanger and the bow.  We will be able to staple our gift request to them.  

Therese

Christmas cards - large joy with watercolour over a variety of backgrounds

I developed this JOY greeting last year for my Christmas card class.  I had a few leftover in colours that were not quite what I needed when I printed them last year.  So this time around I went looking for supplies that would complement these greetings.  I found this very deep eggplant/brown colour of lightweight cardstock that worked very well with the darker ones and I found that I had recently purchased a package of green cardstock that coordinated perfectly with the green ones.  So, next would be to find a layer that would go in between that worked with both of them.
For the dark ones, I used the dark cardstock and cut two layers 4" x 5.25" one for each of them. For the first one I wrapped a single strand of gold metallic embroidery thread around it in both directions and used tape to secure the ends on the back.  I mounted this layer to an ivory card front.  I used gold shimmery watercolour to fill in the JOY to coordinate and used my distress tool on its edges.  Next, I layered the JOY over a gold layer and then distressed its edges as well.  I mounted the JOY to the gold layer and mounted them to the front of my card using 3D foam tape.  I like this one a lot!!
For the other one, I coloured the JOY to coordinate with my card front and added a green ribbon before mounting my JOY using 3D foam tape.  I added a little gold star punchie which I found in my stash using 3D foam tape to finish it off. 
The green one at the top is very similar.  I used metallic gift wrap for the layer, watercoloured the JOY to coordinate with the red berries in the paper, distressed the edges and mounted it with 3D foam tape and finished it off with a silver start punchie. 
For the second green one, I watercoloured the joy in red.  I embossed a white quarter sheet using a poinsettia embossing folder (SU), trimmed it to size and mounted it to a green card front.  I added a length of red ribbon to which I had tied a short piece using a single knot to simulate a bow secure the ends to the inside of the card using double sided tape.  I mounted the JOY using 3D foam tape over the ribbon.  Happy to have found supplies in my stash to complement these two colours so I will be able to use the printed JOYs.  I have quite a few more images so at some point there will be more cards made with them.            Therese

Christmas cards - embossed focal elements featuring ornaments and snowmen

I was searching my stash for something else when I came across these supplies from a Christmas card class two years ago.  I decided to make use of the ones which were already embossed - the ornaments and the snowmen (SX).  The ornaments were layered onto the little printed layers and then I added ribbon/ fiber in between.  I trimmed the bottom of all of them with the scallop decorative scissors and paper pierced each scallop with a push pin.  For these two I used the fall snow embossing folder to emboss the white layer for the first one and the torn vellum layer to the blue one.  I adhered the white layer to a white card front and them mounted the ornament layer using 3D foam tape.  For the blue one I mounted the vellum to the texture card front using double sided tape where the image would cover it.  I mounted the ornament focal element with 3D foam tape over that.

For these two I used a metallic gift wrap layer on the left hand one and colour printed digital scrapbook paper (SU) for the one on the right. Both were mounted to red card bases.  The one on the left was embossed with a little tree (SX).  I have quite a few more little layers so I will be using those up if I need more cards for this upcoming holiday season.  

These last four feature scrapbook backgrounds and the one on the left has an added velvet ribbon beneath the image which is covering a joint in the paper.  Fiber used on all of these. 

Therese

Christmas cards - large images with small greetings and an embossed layer

cre8hands  ksspng

A few more Christmas cards for my stash!!  These are both large images - the Santa (Cre8ive Hands) was laser printed and watercoloured after trimming to size and the cute Christmas tree (KISSPNG) with the font greeting was colour printed.  I distressed the edges of both images.  I added several loops of white fiber to the red embossed layer (SU) of the Santa one and mounted that layer to a green card front.  I added the Santa image using 3D foam tape over the fiber and then added a layered punchie greeting.  The font greeting was laser printed and punched using the Word Window from StampinUP.  It was layered onto a green punchie from the Modern Label from StampinUP as well.  I mounted the greeting with 3D foam tape on the right hand side and just double sided tape on the left where it overlapped the image.  I like the look of the shimmery paint on Santa's coat!!

For the second one, I added gold ribbon after mounting my red embossed layer (SU) adhering the ends to the inside of the card.  I tied a short length with a single knot to the one on the front to simulate a bow.  The image was mounted to the card front using 3D foam tape to finish off the card.  These were made several hours apart and I was not aware I had used the same colour scheme!!

Therese

Christmas cards - laser printed images and a bit of sponging

I printed these images a while back and they have been sitting in my stash.  They would not work for my original plan of sponging a narrow band from top to bottom and so now I had to invent a way to use them.  I decided to just layer them onto cardstock because they worked best that way.   Though I did add several layers of sponging to the nativity one and that worked very well.  I used a torn piece of paper as a mask to add some texture.  I started by sponging the yellow incorporating the star and the stable and then sponged the blues and violets around that.  All the images are from KISSPNG and I added font greetings.  They are much more CAS than I usually do but I do like all the designs so maybe at some point I will revisit the concept of the sponging of a narrow band of colour over an image and greeting.  Therese

Christmas cards - laser printing, sponging and some embellishments

I printed these layers when I was creating these cards and these cards and these cards.  I always try to incorporate Christmas cards into whatever card sketches or techniques I am working with at any given time.  It helps keep Christmas cards in my thought process through the year.  

For the first one, the greeting (Desert Diva) and the poinsettia (Beccy's Place) were combined in layout program (Corel Draw) and laser printed on white cardstock.  Once trimmed to 4" x 5.25" I sponged the edges in green and watercoloured the poinsettia and the large W of the greeting.  I added a yellow ribbon tying a small piece to the main one to simulate a bow and adhered this large element to a red card front.  

For the second one, I sponged the tree in yellow and then added blue all the way around the silhouette image (CLKER).  I used a clear glitter gel pen to add stars in the sky and to colour in the snow on the greeting (Desert Diva).  The space in between needed a bit of something so I added a short piece of red cardstock which I embossed and flagged at both ends.  I mounted two little branch punchies (MS) below a diamond brad to finish it off.  That was definitely better!!  I mounted this layer to yellow cardstock to help the yellow of the image to pop and then adhered this large element to a dark greeting card front.  

I find that I always make changes when I am using previously prepared supplies!!  Always see new possibilities when I revisit them.           Therese

Christmas card - snowman, glitter gel pen and some manual embossing

Have been working on my Christmas card stash and here is my first card!!  This was a stamped image I found in my stash and it was already watercoloured as well.  I trimmed the image to 4" x 5.25" (A2), manually embossed the outer edges with a falling snow embossing folder (SU) and mounted it to a blue card front.  I added some clear glitter gel pen to the star and its path and mounted a small Merry Christmas greeting below the image to finish it off!! 

Therese

Masterboard cards - two more!!

These are the next two cards I made with my masterboard.  Again, the colours are very much warmer than what is showing in this photo.  

I cut a strip from my masterboard and die cut two labels (SX) from it.  I cut two oval layers from orange cardstock - one is from white core cardstock so you can see the white when I sanded it.  I highlighted the one from regular cardstock by sponging on orange ink.  I die cut (SX) two flowers from coordinating teal cardstock and mounted light yellow in behind for the centers.  I layered the ovals on the labels then added the flowers using 3D foam tape.  Next, I cut a sheet of ivory cardstock in two and embossed manually the outer edges - one innie  - the other outie.  I added embossed strips of green and teal with flagged ends and then mounted my focal elements.  These are identical cards but I have laid the right one over to make it a landscape card and it gives it a bit of a different look.  I purposefully resisted putting greetings on these so they can be used for any occasion.  I will be sending these to my Card Exchange partners this month.  I am a bit late but life happens!!!  

Therese

Reusable Bento bag for gift wrapping

My daughter found this idea in a book about bags which she took from the library.  After a bit of research on line I found this pattern and it is called a Bento Bag which was used my orientals to carry their lunch to work.  It is a super easy project once you work out which edge gets sewn to which other side.  
You can use a rectangle ( 3 x 1), two triangles or three squares to create them so you can truly use whatever you have in your fabric stash to get started!!  Check out this site. 

I made this one out of non raveling fabric and it is housing my grandson's birthday gift but for sure you can use any fabric, line it or not, and can be made any size.  I think it would be the greatest thing to making reusable gift wrapping for the upcoming holiday season!!  Made in any or neutral colours the bags can be used year round to store and or carry any number of items - a casserole to the potluck, your items for a day at the beach, all the thread spools in your sewing box, etc.   
So consider reusable packaging this Christmas and save the planet the paper that will be going to the garbage - recycle bin this year!!  
Even if you just make one this year!!!

Therese

Thank you card - a reused card front layered with silver cardstock

This card is for my neighbour which took care of our house while we were away.  I reused a card front from a card I received a while back trimming it to fit on an A2 sized card.  I layered it onto silver  cardstock and then onto a coordinating pink card.  The dark areas are metallic silver so they coordinate very well.  Always great to make a card make another go around!!

Therese

Thank you cards using my masterboard, an embossed layer and a die cut greeting

Here are the first four cards I made with my masterboard.  They are a bit off colour - they are in reality much warmer in colour.  

I cut off a strip of about 3.5" and drew hearts on the back by hand.  I cut them out and then used an embossing marker to add details to the hearts which I embossed with gold embossing powder.  I really like how well that process worked.  I embossed four quarter sheets of ivory cardstock and cut up two sheets of coordinating cardstock to make the cards.  I glued the embossed layers to the card fronts and then adhered my hearts.  I die cut the word Thanks (SX) from black cardstock scraps and then used my fine line white glue applicator to add the words to my cards.  Super happy with these cards!!  They will soon be on their way across the country to family and friends who we reconnected with on our trip east week before last.  

Therese

Another sympathy card - floral image, vellum greeting and a brad

My sister's mother in law passed last week and because of a prior commitment I was not able to attend the funeral this weekend.  I have prepared this card for her and her family. 
I reused a floral image from a commercial card which I trimmed to fit onto a green A2 sized card.  I found a coordinating vellum greeting in my stash which I folded to the back and secured with double sided tape.  I flagged the left hand edge and secured it with a little gold brad.  I glued this large element to my green card.  A quick and easy card that will be sent off today!! 

Therese

Masterboard fun!! - Watercolour background, stamping and a bit of direct to paper with a ink pad

There is talk on Splitcoast Stampers about using masterboards to make up cards and it is a technique I have used in the past but is a really fun one.  I decided to give it a go.  I used a sheet of decorative paper I made a while back that was "OK" but could use a bit of a lift.  I cut an organic shape from some stamp leftover which I used to stamp all over it in teal.  I cleaned the stamp and did it again using orange.  I added olive green circles using the end of a foam tube and yellow dots using the other end which is a nice circle (soft foam "bullets").  I used Antique Linen direct to the paper to fill in the remaining white areas.  Pretty happy with the results I decided to back it with bond paper as it was only bond paper to begin with.  I just glued scrap paper to the back until it was covered. It gave it enough body to be able to die cut it properly.  I am off to make some cards!!  

Therese

Sympathy card - reused butterfly image, embossed layer and a little fiber

My aunt passed away week before last and the funeral was last week.  I had intended to go but was sidetracked with the flu and am now just getting this card out. 
I used a new embossing folder that I bought while I was away.  It is part of a Recollection set - two embossing folders and a small set of clear stamps (Christmas).  Unfortunately, the folder cut the cardstock in a few places which was a bit disappointing.  I repaired from the back and cut the opening out with a Nestibilities Classic Circle die which did the job perfectly.  I put the layer back in the embossing folder to reset the round frame.  Next time, I will cut the circle first and then emboss and will not need to repeat the process.  I tied on a little piece of white fiber between the opening and the right hand edge and mounted a butterfly image in the back of the layer nicely highlighting the butterfly.  I taped it into place before gluing this large layer to a coordinating card front.  I added a small greeting - laser printed Word Window (SU) punchie!!            Therese

Birthday cards with ribbon, embossed cardstock and 3D embellishements

Birthday cards for some special women!!  One of the groups I belong to has decided to send birthday cards to all of our members in 2019 so I volunteered to get cards ready.  I have made all the card kits and we are getting together tonight to put them together which doubles the blessing!!

All the cards are different and I have varied the greetings - round, label, rounded square and square.  All of the 3D embellishments are prepared and the sponging has been done so we will be simply assembling them but I have provided the supplies with enough flexibility that each person making them will be able to add their own creativity to the process!!

So these cards have a coloured cardstock base with a coordinating decorative paper background.  A strip of embossed cardstock and a piece of gros grain ribbon.  The greetings were laser printed, trimmed and sponged a coordinating colour.  A wide variety of 3D embellishments - layered punchies and die cuts, sequins and some fun glittered elements to add a bit of bling!!  

Getting a handmade birthday card in your mail box is always a treat in this digital age!!'

Therese

Baby elephants for this purple and yellow baby card

I have made quite a few baby cards!!  Maybe more than I needed but there it is - sometimes I get on a roll and just have so many ideas!!  This one features the little elephants (Pixabay) with yellow balloons this time.  I layered them onto purple and then over the yellow ribbon which I laid over my purple background/yellow card front combination.  I finished simply by just tying a short piece of the same ribbon to the one on the front using a single knot to simulate a bow.  No greeting really necessary on this one and it could be used a child's birthday as well. 

Therese

A beautiful daisy image from a used card featured on this monochromatic card

For the focal element on this card I die cut this white daisy image from the front of a used card.  I wanted it to stand out so I kept the rest of the card very neutral.  I mounted the daisy to an ivory embossed layer and trimmed it to the edge.  I mounted this large element to an ivory card front.  Finished it off with a little punchie greeting!! Quick and easy!!  Therese