Tea cup coasters!! How fun!! I have made this one as a sample to see if they would suit an occasion that is coming up!!! More info to come!!
Therese
Tea cup coasters!! How fun!! I have made this one as a sample to see if they would suit an occasion that is coming up!!! More info to come!!
Therese
Any device cords that are being unruly at your house from ear buds to I Pods to chargers!!
Battery packs - make custom ones to fit perfectly and keep them safe and clean.
Snacks - anything dry like Cheerios & crackers for the kiddos.
Snacks - dried fruit & nuts for yourself!!!
Medication such as pain and allergy meds or even your prescriptions. Add a few bandaids, too.
Feminine & prevention products along with sun screen, lotion & sanitizer.
Make up like lip gloss, lipsticks, wipes, cleanser, etc.
Accessories - scrunchies, barrettes, hair ties, etc.
Jewelry - bracelets, earrings, bangles, brooches, etc.
Fold up a reusable bag and insert into the pouch so you always have one!!
Tea bags so you can have your favorite with any cup of hot water. Use the pouch as a coaster.
Travel light with just a credit card, cash, bus pass and your keys.
Put your business cards in one and always have some neat ones to hand out.
Sticky notes are always handy and the pouch keeps them clean.
You can always use them to wrap small gifts like jewelery, gift cards, tickets, etc.
and you will be giving "A gift in a gift" with no waste!!!
I am sure there are many more options but these are the suggestions I found online!!
Therese
Therese
It was so great to be back with friends making cards!!! Our first card featured this neurographic art technique. I had printed a central image on a 3" square or white cardstock and we added squiggly lines all around and through with fine tip Sharpie marker just going from one side to another and some all the way to the opposite side. We then softened all the intersections with curvy lines and filled in them in. I added a black border around mine as well. Next, we watercoloured our line drawing using a single colour in our image and other colours all they way around. I should have considered my background before getting started. I had added pink areas which did not really work with my holly background paper. I changed them to red and that was better. After they were dry we mounted our art to a larger square and then mounted it over the background which was already glued to our coordinating card front. I added three little circle punchies to mine but not everyone did which still worked very well. It was fun to create art. You can check out the tutorial I followed here (MIX576) on Splitcoast Stampers.
Therese
These next few cards are the next iteration of my design where I used an embossed layer of white cardstock (4" x 5.25"), added a coordinating banner over the focal element. With these I drew the details before embossing which made it easier to get nice smooth lines on the smooth surface. I embossed the panel and then added the focal element and the banner in the same way as above - adding little bows on the sides and securing the banner ends to the back of the panel with double sided tape. The trouble with this design was that I was having difficulty in consistently getting the banners properly secured to the twine. If it was difficult for me, it was going to be harder for the class participants so I opted for a different design. These were fun cards and I love how light and bright they are - very spring like!! Therese
It starts off with a pentagon shape that fits in a 6" circle. I gave it a try and was not precise enough that my measurements were not exact so I just found a petagon on line and placed it in a 6" circle in Corel Draw and printed it out. Success!! The sides are all 3.5"!!! I trimmed out the pentagon and then cut two pieces of red cotton fabric using this pattern and placed them right sides together and stitched a 1/4" seam all the way around leaving a gap of about 1.25". I turned this shape inside out and then pressed it neatly to get a nice flat pentagon. I then stitched all the way around about 1/8" from the edge which secured everything and closed up the opening. What you see on the front will be the front of the flower. Next, I followed the instructions in the video - measured and marked the center of all the sides, measured two inch towards the middle on each point, drew a curved arch between the points next to the center of the side, through the 2" mark and the back down to the just next the center mark on the next side. Repeat until you have five arched lines. I used a removeable ink pen - first time - and it worked well. The lines are where the gathering happens so it may not be too serious if you draw in some light pencil lines. Next, you sew quarter inch stitches on the arches using a 20" of double heavyweight thread (needs to be sturdy and that long) knotted on the end so it will not pull through. You start stitching from the back (important) and follow the arches always coming to the edge with your needle to the front (important). Once you get back to where you started you pull on your threads to gather each petal and then tie off with double knots. The points of the pentagon create the petals. Works really well and makes a nice sturdy flower. You can then add it to your project, add a clip or barrette, add a brooch pin - whatever you want. I used the threads at the back to stitch it to my cat bag!!!! It was just what I was looking for - a very 3D fabric embellishment. I would have preferred something more related to the cat theme but this will do purrfectly!!!!!! Therese
I made up an off white card using textured cardstock, added a torn strip of vellum and then added my gold embossed stamped image of grasses. I watercoloured the image before adhering it over the vellum.
Therese
Pet bowl mats for Gramma Link Africa. These will be on our merchandise table in June when we have our Rhubarb Tea and again in the fall at our Chili for a Cause. At fabric sorting last week one of the girls was wowing about this cool dog fabric and then out of the box came the bone fabric!! I had already prepped the flannel batting for three of these so I indicated I could use the fabric for making up the outside layers for the pet bowl mats. They came home with me and I washed them up. I used the plaid fabric on the back of each of the mats. All cotton therefore very washable!! They are about 13" x 18".
I used other coordinating cotton scraps from my GA stash to create three unique mats. I like how they turned out. I gave another go at making flying geese and they turned out well. I added spacers to get the width I needed for my mat, framed that in black and then added the bone fabric.
I cut a 7" square of the large dog fabric and added pieces all the way around. I did darker to the upper right and lighter on the lower left. After it was done and I took a photo it would have been better to put the dark on the lower left which would have better framed the image once I added the black strip. I created a length of short pieces where I incorporated some of the bone scraps for the right hand side.
I cut a length of the large dog fabric to 7" along the width of the remnant. I used a long piece on this mat and a square on the above mat. I have a square left that would make a unique potholder for a dog lover!!! I added two strips to each side to finish off the mat. Therese

I added a cool feature - a length of black twill tape which I stitched to the side of the handle which can be used to shortened the length of the handle. I tied it in a bow and it looks cool that way. To shorten the handle you undo the tie make several folds in the handle and wrap the two ends around a couple of times pulling them tight and retying. It works really well. A good feature for such a long handle.
The inside seams are finished making a really neat inside. It is nice to have a bag with a light inside when you go looking for "stuff". I only realized just now that it would have been even better if I had used white thread on those seams!! Next time!!! Therese
Therese