All occasion card featuring a floral background, a strip of pink flocked paper, stitched border and a watercoloured embossed flower

Still making all occasion cards!!  

I started with an aqua card and added a laser printed floral paper in pinks and aquas.  I trimmed and added a strip of pink flocked paper.  Love the texture!!  I used a eyelet border punch (SU) to create the little yellow strip from cardstock and then stitched it with shiny aqua embroidery floss.  It was trimmed to the same width as the background and mounted with double sided tape over the flocked paper.  The flower (SU) is silver embossed, watercoloured and then fussy cut.  I mounted it to my card front using 3D foam tape.  

Therese

 

An all occasion card featuring a stitched floral layer, some paper piercing and a leafy border

The focal element of this card was trimmed from a used card and features some very clever stitching that creates flowers!!  Beautiful!!  I added faux stitching all the way around my trimmed piece using my pattern tracing wheel.  I added a coordinating leafy border in the same colour as my card front and then added another strip of coordinating cardstock to finish off my layer.  I added a line of faux stitching on the right hand side of my card as well before adhering it to my card.  This is a larger than A2 card created to fit an envelope from my stash.         Therese
 

All Occasion card featuring a stamped leaf, torn paper and tracing wheel texture

Still making all occasion cards.  For this one I started with a green card front, added a mottled green decorative paper background and then a strip of torn paper in a lighter green colour which I trimmed to be the same width as the background.  I watercoloured my stamped leaf ( Old Island Stamp Company) and layered it with a large border using another green cardstock.  I ran my tracing wheel on all four edges making wavy lines of paper piercing which adds texture to this layer.  I mounted this focal element to my card using 3D foam tape.  

Therese
 

All Occasion Card featuring an embossed apple, ribbon and a decorative paper background

Another all occasion card!!  I started with a red card, added a polka dot red and white background which I had run down all the sides with my pattern tracing wheel to add some texture.  The apple was embossed using an embossing folder (QuikCuts), trimmed to size, and layered with black cardstock.  I added several pieces of coordinating ribbon on the right hand side using double sided tape before using 3D foam tape to mount my focal element to my card front.  Really love the colours on this one!!

Therese 

A baby card featuring a pieced cardstock background, some green raffia and a cute rattle image

We are expecting a new addition to our family which is due very close to Christmas!!  I have prepared some baby items as I usually do for these occasions and we are hoping to send these off to my son and his wife very shortly.  

For the baby card, I started with a gray card front, added an embossed (D"vine Swirl - CB) paper pieced cardstock background.  I used greens, yellow and grays then just barely highlighted the embossing with a beige ink pad.  I added a green raffia across it and then tied on another short piece to simulate a bow.  I mounted this large element to my gray card front.  I watercoloured the rattle image (Crea8tive Hands) in green and yellow adding some clear glitter highlights.  I added faux stitching to the edges of the image using my pattern tracing wheel before mounting it to a light green cardstock rectangle.  I used 3D foam to adhere this focal element to my card.  For my greeting I started with a font greeting oval punchie from my stash, sponged its edges with green ink then mounted it to a light green scalloped oval (SU).  To finish it off I added clear glitter dots to the scallops!!   Therese

 

Baby card featuring a pink rattle, a paper pieced background, some ribbon and rhinestones

We have a new baby girl in our extended family.  All is well and they are now both home.  New babies are the best!!

I started with a large pink envelope and created a pink card to fit inside.  I paper pieced a pink background and then added pink ribbon over the joints before securing it to my pink card.  I trimmed the little rattle (laser printed digital image from Pixabay) to which I added a little font greeting, layered it with bright green to coordinate with the middle paper and then created a large backer for it.  The backer was embossed with lines around the image using my score tool, trimmed with scallop decorative scissor and all the scallops were pierced with a push pin to add texture.  The bottom border was embellished with some pink rhinetonres.  I mounted this large focal element to my card using 3D foam tape.  

Therese
 

Get well card featuring a watering can, a sanded and embossed background and some seambinding

I made this card for my sister in law who had her appendix removed last week!!  She is home and healing but it is always a slow recovery when you get your appendix removed.  

I started with a blue green card, added a watercoloured watering can with flowers.  This image is from image swaps a long while back and was stamped on a hexagon.  I trimmed the edges to make the image sit straight, distressed the edges and added some paper piercing using my pattern tracing wheel.  I embossed a brown white core background and sanded it to reveal the white core then added a little eyelet punched border punch to the bottom.  I fussy cut a chalkboard greeting, punched a hole and slipped it onto a length of green seam binding.  I added the seam binding to my background using double sided tape to secure the ends to the back.  I tied on another short piece using a single knot to simulate a bow and used 3D foam tape to secure my greeting to the card front.  

Therese
 

An all occasion card featuring a watercoloured background, a watercoloured floral image and some ribbon and raffia

This card was created from parts rescued from a used card.  I trimmed off a portion of the card including the watercoloured background, a deep pink and white layer.  I added a green raffia across the bottom and tied on a piece of burgundy organza ribbon to simulate a bow.  I mounted this layer to a tan card.  From a different portion of the card I rescued the floral image mounted to the distressed edged rectangle.  I watercoloured the flowers and mounted it to my card using 3D foam tape.  It is so much fun giving these beautiful elements a new life!!

Therese
 

All Occasion card featuring rose (digital) with texture provided by scoring, embossing, tracing wheel and paper piercing

I need a few all occasion cards so I decided to make a few more than I need so I can have some on hand.  

I will be using some envelopes that are just a smidge smaller than A2.  

For this first card I started with a white card and added a purple decorative paper background.  I trimmed a white strip, flagged the end and embossed it before adding to my card.  The rose is one of my hand drawn doodles which I laser printed and trimmed to size before watercolouring.  I distressed the edge and using my pattern tracing wheel to paper pierce a line on all four edges.  I layered my rose to a coordinating purple cardstock, added two embossed lines using my scoring tool and then trimmed the edge with scalloped decorative scissors.  I used a push pin to pierce all the scallops before mounting my focal element to the front of my card using 3D foam tape.  I am glad to be back to cardmaking!! Therese

 

An all occasion card featuring a an embossed layer with leaf die cut openings filled with decorative waxed paper and some seam binding

This card was created using a card front trimmed from a used handmade card that features some openings filled iwth waxed decorative paper.  I embossed the layer with a leaf embossing folder, added some green seam binding and then adhered this layer to a red card.  Another wonderful all occasion card!

Therese

 

Two card featuring panels from a handmade card with flowers and a stamped floral border

For these two cards I started by trimming a handmade card with several folds into panels.  For the first, card I used three panels which I layered on to a stamped background (Worn - SU) which I create a while back using green ink on white paper.  I adhered my background onto my pink card front then added my three panels.  I added a dark green seam binding which coordinated nicely and tied on a short piece to simulate a bow.  A great all occasion card.  

For my second card, I used the fourth panel and added a score line and the same seam binding treatment.  The bee has been highlighted with clear dimensional paint.  Another great all occasion card.  These are both headed to my card box!!

Therese
 

Two cards featuring reused card fronts with butterflies and delicate fabric flowers

I have been making cards again and started with a stack of cards that were donated to me by a friend for reusing in my card making.  There were two the same so I made these two cards.  I created a pink card and trimmed the original card front to just fit on my card and adhered it into place.  Done!!

For my second card, I created a pink card in a different colour and trimmed the other card so that it removed the greeting and I added a trimmed piece back onto the right hand side which I had trimmed with a strip punched with the eyelet border punch (SU).  I added a pink ribbon over where they join and glued this large layer to the front of my pink card.  I will be adding these to my stash!!

Therese

All occasion cards featuring pieced decorative paper backgrounds, layered focal elements and some blingy touches

 These are my Card Exchange cards for October.  I used large cards and made blue green cards to fit inside.  The one on the left has a pieced background created with some striped coordinating paper.  I simply used regular tape to adhere the pieces to each other on the back.  I added a pink ribbon, a layer butterfly focal element and some faux stitching.  Thinking it still needed something I added six little pink rhinestones and that was much better!!  The butterfly was assembled with double sided tape and butterflies from my stash.  

For my second card I added an orange polka dot paper to my card and then layered on two pieces of coordinating pennant paper adding a gold orange handmade paper in the gap.  I die cut a large circle from the scrap of polka dot paper and watercoloured it to reduce the contrast between the dots and the background.  I die cut green circle and punched a leaf from the middle of it before embossing it with the Swiss Dot (CB) embossing folder.  I layered the two and then added a leaf punchie which I found in my stash.  The leaf is a punchie that was embossed with a leaf embossing folder before being embellished with gold embossing powder and watercolour.  

They are headed to my exchange partners in tomorrow's mail!!

Therese

Sympathy card featuring velvet ribbon, a layered butterfly and greeting

This sympathy card is going to a member of our congregation who suddenly lost her husband recently.  They are no doubt grieving the loss immensely.  

I started with a large envelope and made an ivory card to fit inside.  I added a layer of hand decorated paper and then a coordinating blue velvet ribbon on the left hand side.  I cut the butterfly wings from the scraps of the decorative paper, the solid butterfly (SX) from a coordinating cardstock which I watercoloured to give it texture and the body from silver foil cardstock.  I glued the body in place on the solid butterfly and then added the wings gluing them only next to the body so they would be free.  I adhered the butterfly to my card front using 3D foam tape overlapping its wing over the ribbon.  I punched a coordinating laser printed greeting, a larger oval and then a scalloped oval (SU) from blue and layered them after sponging their edges.  I adhered it to my card using 3D foam tape.  

I hope they find solace in each other and peace as they grieve their loss.  Never easy!!   Therese

 

Anniversary card featuring a layered heart and greeting with beautiful red ribbon

Our son has been married for a year!!  Time flies!!  I started with a red card and added an embossed (heart embossing folder - CB) which I rubbed with a gold pigment pad and then added gold embossing powder.  It was too thick so I used a brush to lighten it up before I heated it.  I like the way it turned out.  I added a red ribbon and then mounted it to my red card.  I added a layered heart - gold die cut (SU) and a red heart punchie (SU) which I embellished with dots around the edges using a gold gel pen.  I mounted it over the ribbon using 3D foam tape.  I used gold embossing powder on the oval greeting as well before mounting it to a red scalloped punchie (SU).  I embellished the scallops with the gold gel pen as well.  I mounted the greeting just tucked under the heart. To finish off my card I tied a short length of the ribbon using a single knot to the one on my card to simulate a bow.    Therese

Thinking of you featuring a silver embossed flower and greeting with butterfly sticker and some ribbon

My friend has surgery last week and she is home recovering!!  I wanted her to know I am thinking of her as she heals her body and gets back up to speed with her regular life.  I stamped the little flower image and embossed it with silver embossing powder.  I added the little butterfly sticker and the little dots too! I watercoloured the flowers to coordinate.  I trimmed the white, flagged the end and added a piece of orange ribbon to the top.  I mounted this layer to an orange piece and trimmed it to even around the white one.  I cut an orange card to fit in an envelope from my stash and then added the paste paper background that coordinated perfectly with the butterfly.  Love it when it works out so well!!  To finish off I tied a little bit of orange thread to my ribbon to echo the colour of the flowers.  It is off in tomorrow's mail!!

Therese

 

Birthday card featuring a watercoloured laser printed digital landscrap, a paper collage background and a little font greeting

For this birthday card I created a green card to fit inside a large envelope from my stash.  I created another scrap paper collage background with blue paper scraps to create my water and sky.  I added a bit of water colour to my sky to soften the floral pattern.  I added a strip of green to lower the horizon line of my focal element - a canoe on a lake (CLKER).  The image is a digital one which I laser printed and trimmed to size.  I stamped some trees after placing a paper mask to protect the water and canoe area.  Next, I  watercoloured the image, layered it with a black cardstock rectangle and mounted it to my card using 3D foam tape. I flagged and layered my little font greeting and then mounted it to my card front using 3D foam tape on one end and double sided on the other.  

Therese

Birthday card featuring letter scrapbook paper, ribbon and a greeting with a paper button

My youngest granddaugther is so looking forward to school so I added bold letters to her birthday card!!  I decided to try the slimline card style using a #8 envelope which are common and available locally.  I created a yellow card to fit inside.  The scrapbook paper was a strip of letters so I cut it in two and stacked them.  I added a yellow ribbon over where they join and secured the ends to the back before adding it to my yellow card front.  I found a coordinating greeting in my stash, sponged its edges and added a little brown paper button (CB die cut) with gold string tied to it.  I mounted the greeting over the ribbon and then tied a short piece of ribbon to the one on the card to simulate a bow.  

Slow Stitching - my next project

Here are the pieces to my next slow stitching project.  We are expecting another grandchild and this slow stitching project will be creating a little panel that will be part of the baby quilt I am making for its arrival.  The little oval shapes were hand cut around plastic templates - one a little larger than the other. I will reveal what they are once I get started!!  It is a busy time with harvesting of my garden so it may take a day or two to get started!!

Therese
 

Slow Stitching - completed house panel

 This is the completed house panel.  I am still deciding if I would like to add trees, shrubs or flowers before I call it done.  So it will sit for a bit until I decide.  In the meantime, I have another slow stitching panel that I will be starting on soon!!  More details coming!

Therese