Sewing - fabric bread basket for a request from Chili event - 9" square and sturdy

We had a request from a customer at our Chili for A Cause event who was looking for two large fabric bread basket - 8" x10" square!!  I suggested that we could make several and see which ones she wanted.  One person will make a rope bowl one, someone else offered to make a felt one and I volunteered to make a fabric one!!!  

I used this Debbie Shore tutorial to make mine.  I used a 20" square of heavy weight light beige cotton fabric, a 20" square of sturdy polyester batting and a 20" square of decorative cotton in teal, brown and beige.  I laid them with good sides facing each other and laid the batting on top and stitched all the way around leaving a gap to turn it inside out.  After pressing it I stitched all the way around the outside edge to close the opening and start the quilting.  I stitched in a continuous line all the way around the square about 3/4" or so apart getting closer and closer to the middle until I had about a 1" square in the center.  I marked the darts on each side and stitched them and then stitched them down.  I layered two buttons and added them to each flap on the outside securing them to the inside.  I was really happy to find buttons in the right colour!!!!  It measures just over 9" on each side and is about 4.5" high.  Quite sturdy and holds it's shape very well.  It can easily be folded onto itself and be stored flat when not in use.  

It was a fun project and I expect will be just what this person wanted.  

Therese

 

Sewing - fun fabric bowl cozies for GA

I made up some bowl cozies this week as there was request at the Chili For A Cause event we held on Wednesday for some.  I made up 10 of them with some very cool fabric I had on hand!! They are made with 10" squares of fabric and cotton batting - 2 of each.  I stitched one fabric to one batting and then did the same for the other two pieces with cotton thread.  Then I rounded the corners using a template I drew on cardboard using a glass. I  folded them in half and marked and stitched a dart - 1" across and 2" long on the fold on both sides.  I stitched the darts and repeated the same darts on the other two sides.  I trimmed the darts after sewing to reduce the bulk. Then I placed two with fabric facing fabric and stitched all the way around leaving a small gap for turning them inside out.  Once turned inside out I top stitched all the way around the outside  edge which conveniently closed up the gap.  Then I added two more rows of stitching from the top of a curves to the other curve passing through the middle.  Just nicely secures both pieces together and helps the middle create a bottom for the bowl.  I really enjoyed playing with fabric and coordinating the patterns and colours.  I made up 10 of them!!!  Therese

 

Cardmaking - TH funky bird with glossy background, seam binding in pewter eyelets

This card was created in the A2 card format.  The background used glossy cardstock, ink watercolour on the surface and then was embossed and highlighted with a purple ink pad.  Very bold!!!  I added another strip of inked glossy, two eyelets and then a length of pewter seam binding tying it in a double knot on the front.  My bird is more subdued than the other ones but it still works for this card.  

Therese
 

Cardmaking - TH funky birds over a wax resist backgrounds with glittery embellishments

I am working on cards upcoming family events.  I have had these funky birds (TH) sitting on my desk since the last time I made cards with them.  I really love the look of them and that they are very appropriate for many occasion if you start your greeting with  "A little bird told me...." .  I cut a large card for fit in my envelope and added a green rectangle to the bottom of the image which was embossed with stars and I punched out three of  them. I added paper piercing with my pattern tracing wheel and once this large element was adhered to my card I added a double row of glittery stars on the right hand side.  I watercoloured the bird to coordinate and then mounted it to my card front with 3D foam tape once it was dry.  Totally fun cards to make!!

For this card I added a pink layer at the bottom which I punched with a border punch and then embossed with the D'vine Swirl embossing folder and added an embossed line in between using my Score tool.  Added little pink heart embellishments, paper piercing and a fun coordinating bird.  

This background was created with crumpled wax paper which was ironed onto the surface of glossy card and coloured with ink pads.  I embossed the floral swirl and then highlighted with turquoise Distress ink.  I embossed a green rectangle with the same embossing folder and added some clear glitter with a gel pen.  The fussy cut little bird was watercoloured to coordinate. 

I love the personalities of these birds!!!!  This card has the glittery heart embellishments on both sides of the image with two rectangles added - one at the top and the other at the bottom.

I used paste paper for this background and added watercolour to give it more interest.  The two rectangles were embossed and added to the top and bottom.  I added it to my card front and found it still needed a bit of something so I used a scallop border punch (SU) on the edge and added little gold embellishments and a row of paper piercing.  Still needing something I added paper piercing to a strip of yellow and added it to the left hand side and that was better!!  Done

So fun to create with these!!!

Therese

 

Sewing - 4 sets of potholders for the GA

I made up four sets of potholders for our Chili for a Cause Event on Wednesday!!  These have cotton batting, metallic insulating fabric and flannel inside and are about 7.5" square with a loop in the binding.  

A set with white doves on sparkly red fabric with a dark burgundy backing.  

A set with orange and yellow stripes with a fun backing of swirls. 

A set with holly and pine branches and a red backing - great for Christmas!

A set with a winter scene fabric with a dark green leafy backing.  

Therese 

 

Sewing - two sets of potholders with my hand stitched circle fronts

Here are the two sets of potholders that I created using my hand stitched circle fronts.  I really like how they turned out and the backing fabric coordinates so nicely!!!  I did a self binding with the backing and added a loop for hanging in the process.  I added one line of stitching all the way around the circles to keep all the layers together  - 2 cotton batting and 1 metallic insulating fabric.  They will be at the Chili for a Cause we are having this coming Wednesday!!  

Therese

 

Sewing - potholders that coordinate with my latest hot pad

 While all the fabrics were out and available I decided to create a set of potholders that coordinated with my latest hot pad.  It features all four fabrics that make up the removable, washable and reversible cover and turned our really well.  They will make a very nice prize for our summer event!!

Therese

Sewing - another hot pad with a removable and washable cover - 12" x 16"

I have made up another hot pad for a different occasion and made it 12" x 16" because that is the size that worked best with the piece of flannel I had on hand.  I layered in two layers of cotton batting with a layer of metallic insulated fabric in between.  I used cotton thread in order to make it all as heat resistant as possible.  I made a reusable, removable and reversible cover for it using some coordinating fabrics.  It makes is easy to have a special look for several occasions with four different choices.  You can see the fabrics below.  I cut the four pieces of cotton 13" x 17" and used 1/4" seams to assemble it and this one fits just a bit better than the last one on the pad that I made.  Makes a perfect gift for anyone who wants to keep their table and counters undamaged when handling hot dishes from the oven.  This one will accommodate a 9" x13" inch or several smaller ones such as 8" x 8" along with a loaf pan, etc.  

I was late getting it ready so it will be set aside for a family event in the summer instead.  

Therese

 

Slow Stitching - finished the stitching on the circle potholders

I have been working on these potholder fronts for a while.  These were two sets made up from cutting holes in coordinating fabric and then backing the hole with a different colour and applying the hole I cut to a different backing.  I repeated those steps three times to get the layered look of these fronts.  I used the other two colours of thread on each circle - on the brown I used blue and yellow thread, etc.  It was a very fun project and I am ready to make up the potholders.  

Therese

 

Cards - a few IWIN cards from the pieces I had left on my table

After delivering the cards for IWIN to my daughter on the weekend I made up the last of the supplies I had cut into cards for the next delivery.  

Therese

 

Cards - Thinking of you cards for IWIN

IWIN has prepped for their fall backpacks and will need 82.   I needed a few more cards to add to the ones my sister and I have prepped since the spring.  I dug out some papers, butterflies and Thinking of you greetings and got started.  

This fun birdie paper is always fun to work with.  I used the 1.75" SU punch with laser printed greetings layered onto scalloped ovals - both from SU.  The little butterfly stickers worked quite well with the colours so put these cards together.  

Another set using a different background paper and the little butterfly stickers.  It was fun to play around and use different tools with each of them.  Clear gel pen, paper piercing, embossing, etc.  I see there is one that has a butterfly die cut.  My sister brought along a few of these when we worked on cards the last time 

Another fun paper that worked well with the butterfly stickers and I found a butterfly die cut in the right colour for the last one.  

The last few were made with this wonderful butterfly paper!!!!! They did not need too much embellishment!!

Therese

 

Sewing - large hot pad with a removable washable cover with four different looks

I have been playing with this idea for a while and decided I would give it a try.  A hot pad that has a removable & washable cover.  This way you just wash the cover and with the four different fabrics included in the cover it can span several occasions and appeal to a wider audience.     The pad (13" x 16") is made up of two layers of cotton batting with a metallic insulated layer in between.  I laid two layers of cotton flannel cut to 14" x 17" right sides together and pinned them to the "inside" piece. I stitched all the way around leaving a gap to turn it inside out.  After turning it inside out I removed the pins.  I should have counted them because I missed one and had to undo my edge seam to remove it.  I restitched my gap by hand after removing the pin.  I added a line of stitching all the way around at about 1.25" or so.  It will not need much washing if it is always used with the cover.  The cover is made up of four pieces of cotton fabric pieces with an accent strip - two vertical - 2 horizontal.  Just the way the pieces worked out.  There is a winter scene with mountains and a starry sky, one with fun flowers in white vases, a beautiful batik in browns, yellow and orange flowers and a floral with a dark pink strip.  It should cover most seasons and occasions and certainly should provide some options for anyone who is looking for a certain colour or design.  I cut the pieces 14" x17" and sewed  3/8" seams when I was assembling it.  It makes a double sided tube with two fabrics on the outside and two on the inside.  By turning it inside out it features the other two fabrics.  I just folded the pad in half and lined up the two long edges with the seams in the cover and flattened it out inside.  It is a bit snug so will use 1/4" seams next time.  I used cotton thread as well to make it all cotton.  It is a flexible item that is perfect for your table when you have a large casserole dish or two smaller ones.  Protects your table and looks beautiful all the while.   Therese

Sewing - two table runner for merchandise for our Gramma Link Africa - Chili for a Cause on October 23rd

I worked on projects for our next event with Gramma Link Africa - Chili for a Cause.  A table runner (31.5 x 15") which turned out quite nice.  I have not made many table runners before but I really liked this colour combination and theme.  Christmas with white doves and silvery snowflakes and on the other side coffee!!!  For anyone who has red as a part of their kitchen/dining room will appreciate this table runner.  I added polyester batting and sewed it all around and turned in inside out and finished the outside edge with top stitching.  I used my walking foot and its guide to add some quilting about 3" apart at a 45 degree angle.  

 I made this Christmas table runner first!!  Doves on red on one side and a snowy mountain scene on the other side (30" x 15").  Again, polyester batting which I stitched to the red side before placing them back to back and stitching all the way around.  Once I turned it inside out I top stitched all the way around.  I added more straight lines of quilting between the ones I had put in to secure the batting.  I had not yet taken out my walking foot and it might have been a good idea.  

There is always a learning curve.  

These are both not too thick though they do have some dimension because of the fluffy batting.  

Therese

Cardmaking - Card #3 - inked glossy backgrounds with black embossed stamped images and a die cut frame

 For our last card I always create a quick and easy one!!!  These ones feature the backgrounds I was experimenting with before I came up with the technique for our first card.  It was a fun afternoon of playing with ink, water and alcohol!!!!  So I decided to use them for this set of cards.  I decided to stamp black images onto the backgrounds but wanted to highlight them in some way.  I eventually chose to die cut a long tall rectangle from a piece of white cardstock.  I then embossed them with a texture embossing folder (SU).  With this new element I was able to reasonably position my stamped images where the frame could easily be placed to have the image highlighted in the opening of the frame.  It is a little tricky to stamp with embossing ink on glossy cardstock - can easily slip and make a smudged background that cannot be rescued!!  So I chose to stamp all the images for these cards.  So the assembly was quite straight forward.  We embossed our background with a little dots strip embossing folder, highlighted them with contrasting ink and then adhered them to our card bases.  A bit of embellishment to the frame if we wanted to and adhered them to the front to highlight the stamped images!!  Quick and easy!!!  Therese

Cardmaking - Card #2 - fun backgrounds, layered cardstock and watercoloured and embossed images

 For our second card we added ribbon/seam binding to our scrapbook or collaged backgrounds using double sided tape.  Again, we tied the piece to trimmed off to the front using a single knot to simulate a bow before adding these to our card bases.  

The embossed images were ready to go - the black and white (laser printed) ones were watercoloured to coordinate with the backgrounds.  They were then embellished with paper piercing (pattern tracing wheel), and or distressed on the edges.  Their backgrounds were created by placing coordinating cardstock strips next to each other, taped on the back and then trimmed to size for each image.  We embossed our backgrounds and embellished with the pattern tracing wheel and/or the distress tool.  We adhered our images to their layers and then added 3D foam tape to the back and positioned them over the ribbon/seambinding on the front of our cards.  Lots of variations and colour combinations for this set of cards.   Therese

Cupcake - Cre8tive Hands, little flower (my doodle), fall wreath (Beccy's Place), flower wreath (Melonheadz Ilustration), embossed cup with a flower (Cuttlebug).  

Cardmaking - Card #1 - Distress ink background on glossy embossed and highlight with ribbon and black accents

 

It was so nice to see my cardmaking friends again!!!  This was the first card we made.  Glossy cardstock which has been dipped into puddles of Distress ink and water.  We dabbed the ink pads on plastic (packaging) and then spritz it with water one colour at a time cleaning our plastics in between.  It was a fun process of adding colour here and there, drying, and adding a different colour until we were happy with our creations.  Next, we embossed the colourful glossy background and applied a different colour of ink sparingly to highlight the embossed areas.  So fun!!  That was followed by choosing one of our first colours and dyeing our seam binding to coordinate.  Just dabbed the ink on our clean plastics, spritzed water and then placed our seam binding into the puddle and moved it around with a bamboo stick until it was completely dyed.  We carefully dried it with the heat gun.  After auditioning our accents we added a length of seam binding to our background using double sided tape on the back.  We tied the piece we trimmed off to the front using a single knot to simulate a bow.  

The embellishments were all die cut from black because I could not predict what colours each person would use when creating their backgrounds.  We slipped these under our ribbon and added dots of glue OR 3D foam tape depending on how delicate the embellishments were.  All the die cuts are from Tim Holtz.  

It is so great to be creating with others and we always learn from each other and each person follows their muse when they are creating.  It really is so wonderful how one kit with all the same supplies can be used to create such a diverse and interesting cards!!  Therese