Christmas cards - refurbished cards for my Mom

 I have refurbished a few dozen Christmas cards for my Mom.  She is now 86 and it takes longer than it used to when she makes cards so I decided to make a few for her to take the pressure off of getting so many done before Christmas.  She likes cards that feature the nativity so I have saved the fronts of commercial cards that have been donated to me for reuse that feature Mary and Jesus for her.  It was a pleasant day in the craft room and it is so good to be able to do a bit for her after all she has done for me.  

We are blessed!!!

Therese

Christmas card featuring a beautiful angel painted with shimmer watercolour, a border punched layer and an aqua and gold gift wrap background

This is my last card in the bunch which I created with the reused aqua and gold gift wrap which arrived on one of our gift this past holiday season!  For this card I used an image from my stash of this beautiful angel which was stamped in brown.  I coloured it using shimmery watercolours in coordinating colours.  Love how it turned out!!  I mounted it to a piece of aqua cardstock leaving a large border on the right.  I used my MS doily punch to decorate the right hand side and then added two embossed lines using my Score tool.  I mounted my aqua and gold gift wrap background to an ivory card and then adhered my large angel layer to it. Done!  It has been great fun to play with stamps and a lot of my supplies to make these cards.  I am very happy to be so far ahead in getting my Christmas cards ready for next Christmas!!!           Therese

* I have been creating my cards during my self isolation for the Covid 19 crisis.  The sun is shining and it is a beautiful day!!

Christmas card featuring a gold embossed season of light image, ribbon and an aqua and gold gift wrap background

Another fairly quick card!!  I stamped and gold embossed the Season of Light image onto the aqua cardstock, added a layer of gold gift wrap and watercoloured the flame.  I mounted the aqua and gold gift wrap background to an ivory card and added a piece of gold shimmery ribbon to the bottom section securing the ends to the inside of the card.  I trimmed the spine with a slot punch to create the opening in which I inserted the end of my ribbon.  A very nice look for this process.  I adhered my large focal element to my card front and I was done!!             Therese

Christmas card featuring a gold embossed starburst layered with gold on an aqua and gold background

I have been enjoying playing with stamps!!!!  I gold embossed this large starburst image on the aqua cardstock, trimmed it to size and then added yellow marker to colour in the center.  I layered it with gold gift wrap and mounted it to my card front which was layered with my aqua and gold gift wrap background on an ivory card.    This one was fairly quick and easy!!!

Therese

Christmas card featuring Saint Nicolas on an embossed layer, aqua and gold gift wrap background and a layered font greeting

Here is another card created with a colour printed image of a St. Nicolas from an image collection CD.  I die cut the right edge using a TH border die and then paper pierced the edge with a push pin.  I added four vertical embossed lines, three to the left of the image and one to the right, using my Score tool.  Next I added two horizontal embossed lines, one each above and below the image to frame it nicely.   I added a layered font greeting which was created with a scalloped oval (SU) cut from gold metallic paper and a little greeting punched with a large oval punch (SU).  I mounted the greeting using 3D foam tape to my layer.  I mounted this large element to my card front which consists of an ivory card and the aqua and gold gift wrap background. 

Therese

Christmas card featuring Saint Nicolas, ribbon and a small greeting

For this card I am using a colour printed image from my Christmas images stash!  These were printed from images from a CD I acquired years ago at a garage sale.  I mounted the trimmed image to a layer of the aqua cardstock and trimmed it a bit wider on the right side.  I trimmed the edge with scalloped scissors and paper pierced each scallop with a push pin.  I added one embossed line next to them using my Score tool.  I added by background to an ivory card, added a flagged gold ribbon with an echoing piece of aqua cardstock which I adhered in place on the top portion of my card.  I mounted my layered image using 3D foam tape and then added the little layered font greeting with double sided on the left and 3D foam on the right.  I love the soft colours in the image and the way it works well with the background.         Therese

Christmas card featuring aqua and gold gift wrap for the background, a gold embossed nativity layered with gold

Another card using that aqua and gold gift wrap from the past Christmas season! It is a very nice heavy weight paper which I really nice to work with.  I trimmed it to a 4" x 4" and adhered it to an ivory card.  I gold embossed this nativity stamp onto the aqua cardstock, trimmed it to size and then added a layer of gold gift wrap before adhering it to my card front.  I added a bit of colour to the center of the star and I was done!!

Therese

Christmas card featuring a nativity die cut, ribbon, a punchie star and gold embossed Merry christmas on gift wrap aqua and gold background

I am working at getting a few more Christmas cards made with these aqua and gold gift wrap backgrounds.  I cut the nativity wide this time and got a much large scene, gold embossed the greeting on the bottom section,  added a gold ribbon with a tie and then ran my tracing wheel a couple of times across the bottom.  I adhered the background to an ivory card and then mounted the large element I created over it.  Added a little gold star punchie over the stable to finish it off!!

Therese

Christmas cards featuring aqua and gold gift wrap, die cut Nativity and gold embossed greetings

These cards feature the last piece of gift wrap I have to turn into cards!!! Is it a wood grain in gold and light aqua which I have been mulling over exactly how I would use it!!  I started by digging out some aqua cardstock which I have had for a while and worked really well with this paper.  I die cut two nativities (Taylored Expressions) leaving a length of cardstock below.  I trimmed off the star and gold embossed the greetings on the bottom section.  I trimmed the bottom edges using decorative scissors.  I selectively embossed the middle section on the first card using a wood grain embossing folder and then added a length of gold ribbon.  I added a wider ribbon with a tie to the second card without any dry embossing.  I mounted the trimmed gift wrap backgrounds to ivory card fronts and then mounted the large elements I created over it.  I punched little star from gold metallic card (packaging) and adhered them in place over the stable.    Happy with how these turned out! Have a few more to go!!        NOTE:  Creating these during our self isolation during the Covid 19 panemic.     Therese

Anniversary card featuring decorative paper hearts, a stamped greeting and some sponging

This is my second attempt with this card sketch.  I used rectangles last time and because I needed an anniversary card I decided to use hearts for this card.  I created a green card for fit in my large envelope.  I trimmed a subtle green background paper to fit on the front with an even border and then stamped my greeting in the upper portion in green ink.  I then checked out my hearts stash and found a good selection of  heart punchies and die cuts that coordinated with my green card and background to go ahead.  I laid out the top row first and found that the fact that they were pointy on the bottom did not create a strong line to help highlight the green as was the case on my other card.  I decided to trim the hearts a little to help create a line and then was pleased that it helped this set of elements stay within my decorative paper on the top edge.  Next time, I will find/create my elements before I stamp the greeting to ensure I have the distance I need between the greeting and the edge.  I turned over my background and created another row of hearts for my bottom edge.  Once they were both adhered to my background I glued this large element to my card front.  Still not completely happy with the bottom edge of my hearts I decided to add a bit of sponging on the bottom of the hearts to reinforce the idea of a line.  I positioned a mask on the bottom edge of the hearts and sponged a bit of green ink.  That was definitely better.  Next time I will sponge the ink first and then glue my elements over the sponged area.  I really like the interaction of the heart shapes on this card and am happy with how it turned out.  Will continue to play with this sketch because it is so interesting how the elements affect the design.  Makes me wonder how long those who created my inspiration cards took to get their beautiful creations!!
Therese

Birthday card featuring a stamped greeting, decorative paper and hand drawn bows

I have been reviewing my Inspiration file folder and found a few cards using a similar sketch and decided to see if I could make that sketch work for me.  I took me a while to decide what shapes I was going to use and finally chose rectangles.  I cut a brown card to fit in a large envelope and then found this subtle decorative paper which I thought would work well with it.  I used my Making Memories magnetic stamp set to stamp the greeting in dark brown ink.  My metal mount is MIA so I had to improvise - took a bit of time!  I have a lot of stamped greetings that were stamped before I was happy with the coverage and layout of the letters.  While it was drying I dug out my little stash of orange scraps and cut a variety of rectangles and auditioned them to make an arrangement above the words.  Once I was happy with it I adhered them in place.  I turned my background over and created another set of rectangles and glued them in place when I was happy with the layout.  After they were all mounted I thought they were a bit boring so I added little hand drawn bows on the tall ones and added kraft fiber bows to the two small ones.  It adds some texture which was nice.  On hindsight, I could have flagged the ends or cut them with decorative scissors or a border punch to add some interest.  I like the straight edges on the pieces which nicely highlights the greeting!!  Not as successful as the originals but I will try again.  Happy with the result!!           Therese

Christmas cards featuring glittery pinecone backgrounds, die cut ornaments and silver foil accents

Made these Christmas cards using the last of this beautiful glittery pine cone gift wrap which arrived over the holiday season wrapped around one of our gifts.  I mounted the backgrounds to red cards.  I die cut the ornaments (SX) and then die cut the word (TH) out of the middle section.  These are not coordinating dies but they worked out really well.  Next, I dug out my oval Nestibilities to see if I would be fortunate enough to find one of them that would cut an oval appropriate for filling in the opening.  Yes, there is one that does the job perfectly!!!  I cut the ovals from silver foil and also cut the top of the ornament as well.  I trimmed the tops and used white glue to adhere them to the ornaments.  I used regular tape to adhere the ovals to the back of the the ornaments.  I added white thread hangers to them which I secured on the inside of the cards using regular tape as well and then used 3D foam tape to mount the ornaments to the card fronts.   Really happy to have a few more cards for my stash!    Therese

NOTE:  I am staying home as much as I can during the Covid 19 pandemic in hopes of not getting sick.  It has been nice to get ahead on Christmas cards during this time.  

Another quilt top

I found this quilt top in my stash when I was sorting through fabric on the weekend. It was square and fortunately I had cut pieces and scraps of the same fabrics as well. I added a strip of the colourful fabric at the top and then a narrow piece of the wrinkly gray fabric and then at the bottom I added a narrow strip of the colourful fabric and then another of the wrinkly gray fabric.   Using the scraps I created pieces that were 3.5" wide and then arranged them into piles so I could evenly distribute the colours and textures into the border that I needed to add all the way around to get the quilt top to be about 35" x 45".  I stitched the border pieces to each other and then added a length of the border to each side which worked out really well.  I think the quilt looks reasonably balanced the large white areas are pretty much centered.  I will now have to find some batting and a backer.  I will also investigate if I have enough fabric left to actually create a binding for it.  It would be really nice if it coordinated.  If not, I will see if I can find a piece of dark green which would work very well for the binding.  Very happy to be able to give this little quilt top another chance!!!!!!!!  Therese

Birthday card featuring a loon, a torn background, washi tape and a layered greeting

For this card I started with the loon image (CLKER) which I laser printed on white cardstock and trimmed out of a letter sized sheet.  I watercoloured the water and once it was dry I masked and sponged in a horizon and landscape beyond.  I added a row of paper piercing using my pattern tracing wheel on all four edges.  I tore a piece from the inside of an used bank envelope to create my background.  I glued it in place on my black card and then secured it with this fun washi tape which my son gave me for Christmas!!  The pattern is a subtle background with hashed lines in gray.  I mounted the loon image over the background and added the little layered greeting using 3D foam tape.    Therese

Christmas cards featuring glittery pine cone backgrounds (gift wrap), colour printed digital image of a cardinal, ribbon and layered greetings

Another set of Christmas cards for my stash!!  I trimmed the glittery pinecone backgrounds from a large piece of gift wrap that came off of one our gifts this past season.  I was able to trim about 15 or so 4" x 5.25" pieces.  I used six to create these cards.  These cards feature red card bases, the glittery green and white pinecone gift wrap, colour printed image of a cardinal, wide black satin ribbon and layered greetings.  The top set has stamped Merry Christmas greetings in red that are punched with a small oval punch (SU).  All of them are layered onto a larger oval punchie (SU).  Two are layered onto a scalloped oval punchie (SU) as well.  I have pierced the scallops on the large oval  punchies and added faux stitching/dots on the large ovals.  All are mounted with 3D foam tape as are the cardinal images.  

This set has laser printed greetings layered onto red cardstock.   All are sponged a bit on the edges.  I trimmed the middle one with scallop decorative scissors and paper pierced the scallops.  The last one has three little clear rhinestones on the end of the greeting.  

I am happy to be on track for getting my Christmas cards done by the end of the year!!!!  

I will have more cards with this pinecone paper as a background.  Will be inventing a different sketch with different elements!!        Therese

Christmas cards featuring red and blue plaid paper, a variety of images & greetings and some ribbon

I am committed to making Christmas card regularly over the course of this year so I will have them ready by December when I need to have them mailed out.  I decided to use up a piece of foil gift wrap that was around one of our gifts this past season.  It is a red and navy plaid so I just cut what was usable from the piece and got eight 3.75" squares.  I found cardstock that coordindated  - one red and one navy and cut eight cards and the corresponding navy layers for each card.  I dug through my Christmasimage stash and found a few that would work with this sketch and colour scheme.  I also dug through my stash of Christmas greetings and found some that would also work.  I created the cards one at a time after that.

The first one features a Melonheadz image of Santa and the baby Jesus.  I trimmed the image into a square, watercoloured it and added faux stitching all the way around using a permanent marker.  I mounted the navy layer to the red card, added the plaid paper square then mounted the image over the paper using 3D foam tape.  I added a strip of the same red cardstock below the image and mounted my laser printed greeting over it using 3D foam tape.
The second one has a similar sketch.  I added a length of white seam binding to the navy/plaid paper layer before mounting my sleigh image (Black Berry Jelly) with 3D foam tape.  It is watercoloured, glittered and layered with navy cardstock. The greeting is stamped in blue, layered on red and flagged on the right hand side and mounted with 3D foam tape.
The third one features a snowman paper cast which I made a long while back to which I added a little turquoise snowflake with a tiny silver brad.  The paper has turquoise lines which only show when you look at it from an angle.  The laser printed greeting is layered with red, has a folded ribbon on the right hand side and is mounted below the focal image with 3D foam tape.
The fourth one is a bit of a departure from the sketch.  Because the image was larger I tore the square in two and mounted the two pieces to the top and bottom of the navy layer.  I watercoloured the angel (SU) and ran the tracing wheel on all the edges before mounting it to the layer with 3D foam tape.  I punched a Modern Label layer from a scrap of foil turquoise paper which is glued to cardstock to make it stiff enough to mount.  I added a small laser printed turquoise greeting.  I mounted the greeting overlapping the image and added a bit of 3D foam tape to the bottom edge when it attaches to the background.

The fifth card has the plaid paper adhered to the navy glued to the red card.  I layered a die cut nativity image (reused card) onto a white scalloped circle (Nestibilities) which I mounted with 3D foam taper for the plaid paper.  I layered the stamped greeting (SU) with red and mounted it with 3D foam tape.  To finish it off I added a length of white seam binding below the elements and adhered the ends to the inside of the card with double sided tape.
The sixth one has a very similar layout featuring a layered image of a couple of friends out for a walk in a winter wonderland (reused card) layered onto a white scalloped circle with a laser printed image layered with red below the plaid square.  I trimmed the red cardstock with decorative scalloped scissors, paper pierced the scallops and added a couple of embossed lines to each side of the greeting.

For the seventh one, I embossed the navy layer and mounted the paper over it.  Not the best idea with foil paper.  I layered the image of a beautiful house all ready for Christmas (reused card) with turquoise and mounted it this layer using 3D foam tape.  I adhered this large layer to the red card.  I layered the laser printed greeting with red before mounting it to my card front using 3D foam tape.
The eighth and last card features a small die cut ornament in navy.  I used glitter pens to colour the top and the wavy band and added dots of clear glitter to the rest of the ornament.  I mounted it to a white embossed strip with 3D foam tape, added a red ribbon to the top and flagged the end of the strip before mounting it to the navy/plaid paper layer.  I added clear glitter faux stitching all the way around the navy layer and below the plaid paper.  I trimmed a laser printed greeting, layered it with red, flagged both ends and added some embossed lines on each side before mounted it to my card front.
It was really fun to be back making Christmas cards after a bit of a break.  I am very happy with how they all worked out and that they are all a bit different.               Therese

Slow stitching - snippet roll with stitching

I have started stitching my snippet roll!! I will be using a variety of thread colours and you can see above the pattern my stitching makes on the back of the strip.  My stitching pattern is an enclosed Z.  I start at the tip (mid point) and stitch up the side and down the other of the square, then across and down the other side and up to the other side to the mid point which is where I need to be to start the next square.  Works very well!!  

This is my whole strip with my little squares all pinned into place.  With all the prep done I will simply be stitching until I get to the other end.  If this one will get any other stitching or embellishment will be determined if I am inspired in the process of stitching it. 

I expect I will make snippet rolls with the other cushion covers as well but anticipate I will invent a new process for them!! No ideas at the moment but I have some time while I am in the process of stitching this one!!       Therese

Slow stitching - new project - snippet roll with scraps

I have started by new slow stitching project - a snippet roll!!  I am using the cushion covers which I removed as a base for this project.  There were two that are falling apart so those have been relegated to the scrap pile but the other four are worn but usable so I did some research to see what I might use them for.  Because they are worn I do not want to put them into a quilt.  I decided on a snippet roll!!  There are a wide variety of them on line and I decided to make one that could be used as ribbon to wrap a gift.  I cut one of the cushion covers into 2" strips which works well because the quilted square are 4" finished.  I managed 8 sixteen inch strips and used my sewing machine to sew them end to end.   That gave me 132 inches!!  Overnight I decided to have finished edges so I used a bias tape maker for a two inch strip and ironed my strip to have the two edges meet in the middle as you can see above which is 1" wide.  Next, I cut over 250 little 3/4" squares in coordinating colours from my fabric scraps and separated them into darks, mediums, colours and lights.  I started from one end and pinned my squares to the back side (unfinished) of my strip going from dark to light and starting over again.  I will need to sort out how I am going to do my stitching!!        Therese

Exchange cards featuring wood grain tags, botanical prints and wildflower die cuts

My Exchange cards for this month!  I started with a hammered botanical print which I created with my Big Shot a while back!!  I trimmed them to fit on my brown layers which are just a slight bit smaller than the green cards created to fit in my smaller envelopes.  I sponged their edges with green and brown ink.  I used wood grain tags cut from Christmas crackers which our daughter included in our box of gifts.  I ran my tracing wheel over them and sponged their edges.  I added some coordinating fiber to the tops, added them to the botanical layer using 3D foam tape and then ran their ends to the back using regular tape to secure them.  I die cut two wildflowers (TH-SX) from brown cardstock and used white glue to adhere them to the tags.  I adhered the botanical layers to the brown and then to the front of my green cards.  Love the soft look of those botanical backgrounds!!

Therese

Christmas card created with a used card front with some gold foil borders and a gold embossed greeting

For this card I trimmed the main element from a used card.  I started by embossing a little JOY greeting using gold embossing powder.  Next, I used my pattern tracing wheel to add four wavy lines of paper piercing to this layer.  I added two borders - top and bottom - of gold foil.  This foil is from packaging I found in my stash.  I trimmed it with my wavy rotary cutter.  I mounted this large element to a dark green card front. 
It is so satisfying to reuse these beautiful card fronts!!  They will be a blessing to many again this year!!

Therese