Another card using a sticker from my doodle coloring books!! This one is from the Butterfly Garden book. I coloured it with watercolour pencils and then applied water over them with a round brush. It is a different look than applying colour with a brush. It is certainly easier to fill in the small spaces with a pencil crayon. I applied this sticker to white cardstock so the border disappears significantly which works out alright. I manually embossed the background after applying the sticker. That was not the plan but when I gently laid it on the surface to mark off the borders I was not able to remove it so I just went with it. I sponged the outer edge with a bit of warm blue ink and then machine stitched on some ribbon flags with white thread on the right hand side. I like the polka dot ribbons!! I added a layered punchie greeting just below the butterfly. Thinking it needed a bit of something, I added little rhinestones to some of the dots on the butterfly and also a little red heart rhinestone to the body. Adds dimension along with the ribbon. Therese
Showing posts with label crayons. Show all posts
Showing posts with label crayons. Show all posts
Thursday, May 04, 2017
Monday, November 14, 2016
Some more floral cards with pop
Labels:
A2 cards,
birthday,
cards,
colour pencils,
crayons,
gel,
get well,
glitter,
ink,
laser printing,
thank you,
thinking of you
Tuesday, September 06, 2016
Quick and easy - laser toner resist cards
I have been pondering ways of creating quick & easy cards and here is the first technique I worked out - laser toner resist!! All of these cards use black toner from a laser printer as the resist along with waterbased colouring mediums. All of the images are from CLKER. I created the digital files using Corel Draw but any layout or word processing software could be used for laying them out and then printed them on 8.5" x 11" white cardstock. I cut them into quarter sheets and then added colour!! These first three have been coloured using SU watercolour pencils. For the first one I applied the colour to a silicone craft sheet, spritzed it with water and placed my quarter sheet with the image facing down in the wet paint. Worked out perfectly! I wanted the words in the pink area. I did add a bit of watercolour with the crayons to certain areas - outside edges, some greenery and a few flowers and then spread the colour with a wet paintbrush.
For the two butterflies I applied the crayons to the areas I wanted a specific colour and then spread the paint with a wet paintbrush. I added the blue on the outside edges by colouring on my craft sheet with the crayon and then picking up the colour with a wet foam brush. It gives a bit of a different look. Really happy with how these turned out. The fun is that these can be painted any colour!! So, next time I print them out I can make cards that look different by choosing different colours and/or colouring mediums. FUN!!
There is one missing from this set - it was printed in gray and I was not happy with the result of that one so it has been added to the serendipity stash bin. I like the contrast of black with the colour much better and in some cases, it was beneficial to wipe them a bit after they are dry to remove any colour that remained on the laser printing. These buckled a bit with the amount of water I had applied so I let them dry and pressed them under weight to flatten them. You could dry them more quickly with a heat gun and then press them. To make the cards I trimmed the images to 4" x 5.25" and adhered them to a coordinating card front.
For this set of cards I used one of the grungy CLKER backgrounds and added images and greetings. I did have to use images or fonts filled with white if I did not want the background to show through - for example, the rose and Happy Birthday. The heart was transparent and the background shows through.
For these ones I used watercolour from a kids set and a foam brush, randomly adding strokes of colour that worked together until I was happy with the look of the piece. I did add colour to the flower, the heart and the Happy Birthday afterwards with a smaller paintbrush to get them to stand out more.
For this set I used Distress Ink pads applied directly to my silicone craft sheet, spritzed with water and then laid the cardstock into the puddle of paint with the image facing down. I kept sopping up paint until I was happy with how it looked. I really liked this process and it was possible to choose to place certain colours in specific areas. I really wanted the top of the thank you card to be lighter and it turned out just like I wanted it to!!
UPDATE: I have made a few more of these cards since this posting and have created a tutorial as well. You can find the other cards here and here. The tutorial is here or you can CLICK Tutorials above and scroll the the bottom of the list and click the link.
So this has been a fun experiment!! I found it was relatively easy to create some artsy cards using white cardstock, some free digital images, my laser printer and some easily available colouring mediums. The kids sets of watercolours are on sale at this time of the year and will provide colour for hundreds of cards.
I challenge you to give it a try and let me know how it works out for you!! Leave me a comment with a link to your creations and I will go and check them out!!
Therese
For the two butterflies I applied the crayons to the areas I wanted a specific colour and then spread the paint with a wet paintbrush. I added the blue on the outside edges by colouring on my craft sheet with the crayon and then picking up the colour with a wet foam brush. It gives a bit of a different look. Really happy with how these turned out. The fun is that these can be painted any colour!! So, next time I print them out I can make cards that look different by choosing different colours and/or colouring mediums. FUN!!
There is one missing from this set - it was printed in gray and I was not happy with the result of that one so it has been added to the serendipity stash bin. I like the contrast of black with the colour much better and in some cases, it was beneficial to wipe them a bit after they are dry to remove any colour that remained on the laser printing. These buckled a bit with the amount of water I had applied so I let them dry and pressed them under weight to flatten them. You could dry them more quickly with a heat gun and then press them. To make the cards I trimmed the images to 4" x 5.25" and adhered them to a coordinating card front.
For this set of cards I used one of the grungy CLKER backgrounds and added images and greetings. I did have to use images or fonts filled with white if I did not want the background to show through - for example, the rose and Happy Birthday. The heart was transparent and the background shows through.
For these ones I used watercolour from a kids set and a foam brush, randomly adding strokes of colour that worked together until I was happy with the look of the piece. I did add colour to the flower, the heart and the Happy Birthday afterwards with a smaller paintbrush to get them to stand out more.
For this set I used Distress Ink pads applied directly to my silicone craft sheet, spritzed with water and then laid the cardstock into the puddle of paint with the image facing down. I kept sopping up paint until I was happy with how it looked. I really liked this process and it was possible to choose to place certain colours in specific areas. I really wanted the top of the thank you card to be lighter and it turned out just like I wanted it to!!
UPDATE: I have made a few more of these cards since this posting and have created a tutorial as well. You can find the other cards here and here. The tutorial is here or you can CLICK Tutorials above and scroll the the bottom of the list and click the link.
So this has been a fun experiment!! I found it was relatively easy to create some artsy cards using white cardstock, some free digital images, my laser printer and some easily available colouring mediums. The kids sets of watercolours are on sale at this time of the year and will provide colour for hundreds of cards.
I challenge you to give it a try and let me know how it works out for you!! Leave me a comment with a link to your creations and I will go and check them out!!
Therese
Labels:
A2 cards,
cards,
crayons,
distress inks,
laser printing,
paint brush,
SU - StampinUP,
watercolour
Saturday, June 07, 2014
Gifts of Imperfection - Cultivating meaningful work
The course is over but we have a few weeks to finish up our work so I am working on my Gifts of Imperfection E course by Brene Brown this weekend. Week Four's lesson is about identifying our "Superpower" so we can apply it/them to doing meaningful work. Meaningful work feeds our spirit and makes a difference in the world - we are very fortunate if it also pays the bills. If not, then it is beneficial for us to find a way - volunteering, a side business or a part time job that will do it for us. Our Kryptonite is how this same quality can become a detriment if we abuse it.
I started both of these pages with watercolour crayons - the SU Bold and Bright & Regals sets!!
These are wonderful crayons that are rich and creamy and are very versatile because they can be used in so many ways. I scribbled all around the pages with the crayons and then just ran a wet brush over them - they melt into a puddle of colour which you can distribute as you wish. To add texture I applied several colours of watercolour to a back ground stamp by just rubbing the crayons over the rubber surface, spritzing it with water and stamping it onto my page!! I love the way it came out. I added my hand lettering and the borders with a fine tipped Sharpie once the pages were dry!!
One more lesson to go!!
Therese
I started both of these pages with watercolour crayons - the SU Bold and Bright & Regals sets!!
These are wonderful crayons that are rich and creamy and are very versatile because they can be used in so many ways. I scribbled all around the pages with the crayons and then just ran a wet brush over them - they melt into a puddle of colour which you can distribute as you wish. To add texture I applied several colours of watercolour to a back ground stamp by just rubbing the crayons over the rubber surface, spritzing it with water and stamping it onto my page!! I love the way it came out. I added my hand lettering and the borders with a fine tipped Sharpie once the pages were dry!!
One more lesson to go!!
Therese
Thursday, March 27, 2014
Gifts of Imperfection - last journal prompts
I am just finishing up the last of the journal prompts that Brene provided us to work on as in interim activity between Part 1 and Part 2 of her Ecourse - The Gifts of Imperfection which is being offered by Oprah on her website. It has been fun to create arty pages on which to work the substance of the journaling for the prompts.
I hand lettered the titles on these pages using a fine tip Sharpie and added colour afterwards. This time around I decided to use my new set of watercolour crayons by Stampin UP!! The regal collection!
I had only seen these demonstrated before but when they were on clearance I decided to give them a try. They are solid watercolour crayons and therefore a very cost effective source of watercolour. They are very creamy, vibrant and are easily watered down without getting too runny. They are a little more opaque than my current palette of watercolour - a kid's set I bought years ago. I really love all the colours in this set and will use them a lot.
On the first page I just rubbed the pencils onto the page and brushed on water with a foam brush.
Not my favorite way of using these crayons. I found the strokes were too visible for my liking. I used a watercolour paint brush to fill in around the letters of my title and I liked that much better. I just wet my brush, wiped it across the end of the crayon and applied to my cardstock. For page two I just used my brush to flick paint from the end of the crayon - a little trick I discovered as I was applying paint to my brush for the first page. I used several colours of green to fill my FAITH word. I used the leftover paint in my brush from the first title to colour the title on this page. As you can see, the watercolour is easily watered down and still gives a nice depth of colour. On my third page, I started by adding colour to my title and then remembered reading about a transfer technique using Sheer Heaven on the Whatever . . . Whenever blog. I do not have any Sheer Heaven but I did have a few small pieces of vellum on my desk so I used that. I just scribbled or drew on the vellum and applied the coloured side of the vellum to my damp cardstock. It transfers nicely. The wetter the paper the more your transfer has a watercolour look. Too wet and it just makes a blob of colour, on drier paper you get more definition. Your paper does require to be dampened to get a transfer of colour of any kind.
So, Part 2 of the course starts next week and I am looking forward to getting back to the material from the book. I am sharing with my Book Club friends from out east using Skype which has been lots of fun!!
Therese
I hand lettered the titles on these pages using a fine tip Sharpie and added colour afterwards. This time around I decided to use my new set of watercolour crayons by Stampin UP!! The regal collection!
I had only seen these demonstrated before but when they were on clearance I decided to give them a try. They are solid watercolour crayons and therefore a very cost effective source of watercolour. They are very creamy, vibrant and are easily watered down without getting too runny. They are a little more opaque than my current palette of watercolour - a kid's set I bought years ago. I really love all the colours in this set and will use them a lot.
On the first page I just rubbed the pencils onto the page and brushed on water with a foam brush.
Not my favorite way of using these crayons. I found the strokes were too visible for my liking. I used a watercolour paint brush to fill in around the letters of my title and I liked that much better. I just wet my brush, wiped it across the end of the crayon and applied to my cardstock. For page two I just used my brush to flick paint from the end of the crayon - a little trick I discovered as I was applying paint to my brush for the first page. I used several colours of green to fill my FAITH word. I used the leftover paint in my brush from the first title to colour the title on this page. As you can see, the watercolour is easily watered down and still gives a nice depth of colour. On my third page, I started by adding colour to my title and then remembered reading about a transfer technique using Sheer Heaven on the Whatever . . . Whenever blog. I do not have any Sheer Heaven but I did have a few small pieces of vellum on my desk so I used that. I just scribbled or drew on the vellum and applied the coloured side of the vellum to my damp cardstock. It transfers nicely. The wetter the paper the more your transfer has a watercolour look. Too wet and it just makes a blob of colour, on drier paper you get more definition. Your paper does require to be dampened to get a transfer of colour of any kind.
So, Part 2 of the course starts next week and I am looking forward to getting back to the material from the book. I am sharing with my Book Club friends from out east using Skype which has been lots of fun!!
Therese
Friday, January 03, 2014
"Watercolour flowers" cards
Here are a couple of cards I created using the backgrounds I created using this Watercolour Flowers Tutorial I created. It is a quick and easy technique that requires minimal supplies and gives you very unique & artsy looking flowers. Check it out!!
For this card I trimmed the quarter sheet background down just a little, added a piece of black lace across the lower section, mounted a layered silk flower accent with a small black brad and added an embellished layered greeting. I mounted this element to a black card front. It still needed just a bit of something so I added five feathery leaf punchies (MS) in two colours of green. Loving it!!
For this card, I trimmed the background quite a bit more and mounted it to a black layer. I stippled the outside edge of my blue card using black ink and a stipple stamp (SU). I added a piece of 1/4" black ribbon across the card front and added the layered accent over it. I used the same ribbon to create a flag embellishment, glued it to the back of the layered greeting and glued this element to the card front using 3D foam tape. Pretty happy with this one too!!
I am really loving the artsy look of these backgrounds and am looking forward to creating a few more with different elements!! Hope you will give it a try!! If so, please leave a comment and a link to your creation if you can.
Therese
For this card I trimmed the quarter sheet background down just a little, added a piece of black lace across the lower section, mounted a layered silk flower accent with a small black brad and added an embellished layered greeting. I mounted this element to a black card front. It still needed just a bit of something so I added five feathery leaf punchies (MS) in two colours of green. Loving it!!
For this card, I trimmed the background quite a bit more and mounted it to a black layer. I stippled the outside edge of my blue card using black ink and a stipple stamp (SU). I added a piece of 1/4" black ribbon across the card front and added the layered accent over it. I used the same ribbon to create a flag embellishment, glued it to the back of the layered greeting and glued this element to the card front using 3D foam tape. Pretty happy with this one too!!
I am really loving the artsy look of these backgrounds and am looking forward to creating a few more with different elements!! Hope you will give it a try!! If so, please leave a comment and a link to your creation if you can.
Therese
TUTORIAL - watercolour flowers background
Watercolour Flowers Tutorial
Start with a quarter sheet of white cardstock and some watercolour crayons.
Using different colours of watercolour crayons start making circular scribbles
in groups of five. Add a yellow circular scribble in the middles of all of your flowers.
Now add little oval shapes with a line down the middle using a green
watercolour pencil to create leaves for your flowers.
Next spray your decorated cardstock with water and spread the water colour
using a paintbrush.
Once you have watercoloured all of your flowers leave your cardstock
to dry. I used my heat gun to dry it more quickly.
Next, use a black fine tipped Sharpie marker to make circular shapes over
all of the petals of your flowers. Add dots to the yellow centers.
Add swirls and dots in between the flowers as you wish.
Here are a couple more I made using this technique. On the left, the flowers
are really close together - on the right, they are farther apart. Either way works well and
gives you a bit of a different look. I also added dips & lines to my petals in these ones.
gives you a bit of a different look. I also added dips & lines to my petals in these ones.
This is a quick and easy watercolour flowers technique that you can use to create
backgrounds in minutes. It is all free form so can be varied as you wish
to give you the kind of background you are needing for your project.
By making elongated ovals instead of circles you could create dragonflies.
Large squat ovals in two different sizes would create butterflies.
Make only one flower and use as the main element on your project!!
Try it out and see what you are inspired to create!!
You can see a couple of cards I made with my backgrounds here.
Therese
Labels:
A2,
background,
cardstock,
crayons,
flowers,
paint brush,
sharpie markers,
technique,
tutorial,
water,
watercolour,
white
Subscribe to:
Posts (Atom)






















