Showing posts with label seed beads. Show all posts
Showing posts with label seed beads. Show all posts

Monday, May 08, 2017

Paper pieced fabric postcard


On my fabric postcard group they issued a paper piecing challenge.  I had to research what paper piecing was to decide whether I would take the challenge.  I have to say that it was a bit intimidating to figure it all out.  Eventually, I found a pattern that I thought I could manage - a little tree.  I had to reduce the pattern to make it work on a postcard and the pieces ended up quite small so I just combined every second one to give 6 pieces in the tree and then the two side pieces.  It took some diligent following of the directions to get the first three correct. I did get one wrong and had to undo my seam and start again.  To expand the square design into a postcard I added a piece on each side.  I used copy paper to print my pattern and forgot to shorten my stitching for the first two so when it came to removing the paper it took a bit more effort to remove those two pieces.  I would not want to make a whole quilt with paper pieced blocks and it certainly would be handy to have the "add a quarter" ruler for any large project.  I am happy with my first try.  I dug all the pieces I needed from my scrap bin.  On hind sight, it would have been better to choose some more sedate pieces for the sides but I was having difficulty visualizing the end result but I think that process just gets easier the more you do it.  After adding all the pieces removed the paper and trimmed my postcard to 4" x 6", added batting and stitched along of my line using green thread on the tree and red on the side pieces.  Next, I cut a piece of white to 41/2" x 6 1/2", added fusible webbing to the edges then centered my postcard on the backer folding the overhang to the front and fusing it in place which effectively bound my project.  I added stitching in white on the side pieces to secure the backing to the remainder of the postcard.  I crocheted a single chain using some textured yarn and couched it onto the edge using the zig zag stitch on my sewing machine with green thread.  I like that look!!  To finish off my postcard I hand stitched some seed beads to the edge of my pieces on my tree.  That worked out well.  Therese

Sunday, December 25, 2016

Handmade ornament for a gift exchange

I made this little quilted tree ornament for a gift exchange at our family Christmas on Christmas Day.  I found the top layer of the tree in my stash which I created at the same time as this one.  I finshed this one a little differently.  I added some batting which I machine stitched in place following the lines in the quilting.  I cut the same sized tree out of green felted wool and stitched it all the way around with green thread on the front and red thread in the bobbin.  I added a red rick rack garland and secured it with a few stitches where it touched the edges.  With the layers secured I used red floss to blanket stitch all the way around being sure to secure the garland on all the edges.  I found this white beaded trim in the bag with the tree so I decided to use it to trim the tree edges.  I simply stitched in into place along the edge using overhand stitches and white thread.  It softened the red outline which the blanket stitching had created which worked out better than I expected.  I stitched on some sequins - red, green and gold  - adding seed beads to keep them secure.  I stitched several beads in place on the garland to keep it in its place and add yet more sparkle.  I stitched on a rick rack hanger and added the layered sequin star which is secured by a little yellow crystal bead.  I added a drop of glue where the pearl beaded trim joined up to keep both ends aligned.  I added a tag on the back with my name and the year.  This ornament will be combined with a consumable gift which all has to fit in a shoe box and be wrapped in newsprint.  Looking forward to a great Christmas with my family!
Therese

Thursday, January 14, 2016

Fabric postcard with a butterfly embellishment


This is my second January postcard for the birthday club on my Fabric Postcard group.  We need to have our postcards out to our partners for them to arrive for their birthdays so I needed to get them made as early in December as possible to avoid the Christmas rush both here at home and in the postal system.  I started with small precut scraps and stitched them together to get two rows.  Last time, I did not measure right away and found later that I was short just a bit so I measured and again needed just a bit so I added a strip of brown between the the rows.  I like this option much better.  I decided to use this butterfly applique so I cut out a scallop circle using my Nestibilities out of mottled yellow fabric to which I had already added fusible webbing.  It did not cut as neatly as I had hoped but that was probably because I had not lined up my cutting plate quite right.  I applied my adhesive backed applique to the circle using my iron over some release paper because I had already applied the fusible webbing to the circle.  Before  applying it to the front of the postcard I decided to see what I might want to add as embellishment.  I added a layer of interfacing and then some batting to the back before I stitched down both sides of the middle strip and adding some free motion stitching to the pieces on both sides.  I thought the strip needed a bit more embellishment so I added a piece of orange rick rack and hand stitched it in place with green thread.  It still needed a bit of something but I thought maybe I would work on that after I had added my focal element.  I positioned my scallop circle and applied heat with my iron until it fused to the postcard front.  Next, I added red seed beads to each scallop using yellow thread.  It still needed a bit of something so I added faux stitching with a fine tip permanent marker using a Nestie circle as a guide.  That was much better.  Next, I revisited my rick rack and decided to add red seed beads to each dip and then three french knots above each one.  I am really happy with how that worked out.  I have seen all sorts of wonderful stitching combined with rick rack to create wonderful embellishments on projects.  I should have stamped on my light square before applying my focal element but I forgot.  So I decided to stamp "celebrate" several times and then added the "life" lower.  I used green permanent ink and I am happy with how it turned out.  I added a white backing fabric which I fused to the batting.  Unfortunately, the dark bobbin thread shows through the white but it was fused in place and I was not able to undo it.  I will have to remember to change my bobbin thread to coordinate with the batting next time.  It is a learning curve!!  I trimmed all the layers to 4" x 6" and then added an off white bias tape to the edge.  I am looking forward to learning more about these little art projects and trying some new techniques as I work on birthday postcards this year.  

Thursday, November 12, 2015

Crazy quilted tree ornament

                               

On one of my groups I joined a Crazy Quilted ornament swap. We could send as many as five ornaments - I decided to do just one.  I machine quilted a triangle using small scraps adding pieces one at a time around the green polka dot square.  It was fun to add a variety of fabrics and colours.  Once that process was finished I trimmed the edges evenly and started adding hand stitching to each seam using a variety of coloured floss and stitches.  Next,  I cut a triangle a half inch wider in every direction in a dark green fabric.  I laid it on the back of my triangle and folded the edge over twice and stitched over it using blanket stitch in green floss.  I had to iron it before I stitched because it was much too unruly otherwise.  Then, I added embellishments - sequins, beads and buttons.  It still needed a bit of something so I added a tiny rick rack garland which I stitched on with red floss.  Lastly, I added a sequin star at the top.  Oh, yes, I did add a rick rack hanger at the top in the process of doing the blanket stitch around the perimeter.  I did add some random red stitches on the back to better adhere the back to the front and added a shrink plastic tag with my credits on it.  This is my first crazy quilted project. I am happy with it how it turned out.  I hope to learn more stitches and to add lace to my next project.  Looking forward to receiving an ornament in exchange.

Therese

Wednesday, October 21, 2015

Art Quiltie for October!!

Has been a few months since we swapped Art Quilties but we are once again getting that process started.  It was a No Theme swap so I decided to do a fall theme and used the reverse applique technique. Reverse applique means that instead of applying a shape to a panel. you cut out a shape in the panel and back it with something interesting.  I used fall colour scraps and fused them to a backer until I had a piece big enough to fit behind the leaf pattern I had drawn free hand.  I drew the leaf on the blue panel, positioned the fall coloured layer behind it and then stitched a line with yellow thread over the line I had drawn using my sewing machine.  I used sharp pointy scissors to cut away the blue panel fabric inside the leaf as close as I could to the stitching.  After that, I stitched over the edge of the blue fabric leaf outline using a tight zigzag stitch with the same yellow thread.  Worked out really well!!  I backed this piece with a bit of fiberfill and added the stitching all the way around the leaf.  Next, I cut a piece of dark peach fabric larger than the 4" square of my panel, positioned it on the back, folded over the extra to the front and used blue embroidery thread to do blanket stitch all the way around the edge.  Really happy with how well that finished off the edge.  Next, I hand stitched coloured seed beads all the way around the leaf shape and added some veining inside the leaf shape using shimmery yellow thread.  Next, I added some square sequins and dark orange seed beads along the stitching lines and then some gold/copper seed beads in between where ever it looked good.  I did add some french knots to secure the backing fabric to the whole quiltie and then added my credits using iron on label fabric tape on which I had written using a fine tipped Sharpie!!  My art quiltie  - a fabric chunky book page - is already off to my swap partner!!
Lots of fun and I am happy to be making these again!!

Therese

Friday, July 17, 2015

Mixed Media fabric wall hanging with a quote

I have finally finished my wall hanging.  It has taken longer than I expected but there were several times in the creative process that I had to wait for inspiration to come.  That is as it should be!!
I started by sewing blue, pink and patterned fabric scraps together to create a panel in a bit of a log cabin style layout.  Next, I played with a variety of elements to see how and what I would use to create my piece.  I eventually decided to add my quote to a non running fabric (Windex wipes) using a fine tip Sharpie.  I printed rhw quote onto paper and was able to see it well enough thriough the fabric to trace it.  I trimmed the edges of the fabric, stitched it to my panel and then used the overcast stitch with black embroidery thread to secure a larger fiber over the machine stitching.  Two squares seemed quite jarring - they were pretty much too light for the rest of the piece so I watercoloured them in blue, masked them off and added stippling in navy ink.  That toned them down considerably.  I started auditioning trims and eventually chose the two pieces of cotton eyelet lace and the pink fabric trim.  The pink was not quite the right colour so I added a red acrylic paint colour wash.  That was better.  I sewed on all the trim using white thread in my sewing machine.  To add yet more texture I added some white hand stitching over the pink trim adding pink and white glass seed beads as I went.  That worked out very well.  Knowing that I wanted to add some floral elements I auditioned some silk flowers and really liked these blue ones.  I added blue flower sequins to their centers, some silk leaves in behind and added a tiny yellow seed bead to the center as I stitched them into 3D embellishments.  Next I played with placement of my flowers until I was happy with the layout.  Two of the smaller ones were used to disguise the two squares that had been toned down as they still contrasted too much with the rest of the piece.  That worked out well.  Before sewing on my flowers I played around with how I would finish off the edges of my hanging.  I finally decided to lay the front face down on the back and stitched around the edge leaving a gap to turn the whole thing inside out.  I did remember to add two white bias tape loop hangers to the top before I stitched it up. Very happy with how that worked out!!  I stitched up the gap, pressed everything very well and added a row of machine stitching all the way around the edge which stabilized it very nicely.  As I was getting ready to add my flowers I decided that the quote needed to have some flowers on it.  I dug through my stamps and found this doubled ended flower stamp (SU).  I coloured the areas with markers, huffed on it and stamped them in place - one on the left and the other on the right.  To add texture, I added french knots to the flower centers.  Very happy with that!! Next, I thought maybe the back and the front needed to be attached more closely than only on the edges so I added hand stitching (not all the way through) to all the pieces generally adding thread in the same colour as the fabric was printed so that the only effect I created was texture on the fabric.  I added pink french knots to the little roses on the fabric on the left hand side.  I like the way that turned out!  Finally it was time to sew on my flowers!!  I stitched them on by hand using yellow embroidery thread.  The result did not please me as much as I had hoped it would.  It still needed a bit of something!!!  I auditioned a wide variety of options and finally settled on leafy green cardstock die cuts.  I watercoloured them with yet more green, dried them and moved them around my flower until I was happy with the layout.  I took a photo with my camera to use as reference before I stitched them around my flowers.  That was much better!!!
Here is a photo of the first one I made where I used much more of a collage technique.

Here is the back of my wall hanging.  It features hand painted fabric which I made myself.  I started with a piece of white cotton to which I applied several colour washes of acrylic paint in pink and blue. Once dry,  I added a layer of batting which I stitched into place using blue thread in a diagonal grid pattern.  I added white dots to each space using acrylic paint and a little round foamie dot.  I added four blue loops at every other intersection and pink french knots in between.  I had made it large enough so I could  just fold over the edge and stitch it in place had I decided to finish it off that way.
 I am happy with my wall hanging!!!!  I will be writing my credits on white cotton, stitching it to the back then packaging it up and it will be off to my swap partner on Monday!!

Therese

Tuesday, June 30, 2015

Butterfly felted wool postcard

My newest fabric postcard!!  I am loving it!!  I created it for a swap on one of my groups, Trading Fabric Post Cards!!  I started with the beginnings of a cuff from a few months back when I created this one.  I had started with a strip of green wool felt and had begun adding beads to the outside of the felted wool butterfly die cut.  In the end, the process was taking longer than I expected and I ended up changing directions completely so this has been sitting around with thread and beads waiting to find a new life.  So, to give it a new life as a postcard, I finished off the beading and added some stitching in three different colours of embroidery thread inside the butterfly.  I added some black seed beads to form its body and I fashioned a pair of wire antenna which I also stitched on.  I was very happy with that.  To convert the cuff to a postcard I had to cut off about 2" of the length and add an inch to the width.  I rummaged through my felted wool scraps and found some warm green that coordinated very well so I cut a couple of half inch strips - one for each side and used purple embroidery thread and the sheaf stitch to bind them together.  I am enjoying learning new stitches from my "Stitch Step by Step" book which I acquired on my winter vacation.  I wanted to repeat the bright green colour so I added single stitches between the sheaf stitches.  I used white embroidery thread to add the flight path using a plain running stitch.  I created a backer for the postcard using white cotton, pinned it to the front and attached them together using blanket stitch which I executed with turquoise embroidery thread.  This was working out very well.  To integrate the front and the back I added machine stitching with white thread in the bobbin and coordinating green thread on top.  I like the way that worked out!! I took a needle and hid all of my thread ends inside the structure of the postcard.  I felt it still needed a "bit of something" on the right hand side so I dug through my sequins and found three different colours in three differetn sizes.  The medium one was originally gold but I modified it with a green Sharpie and now it is exactly the right colour!!  Gotta love it!!  I stitched them into place using green thread and added black seed beads in their centers.  I will be prepping it for mailing and send it off as soon as I receive the name of my swap partner!!

Therese

Monday, June 08, 2015

A bright Art Quiltie for June

For my June art quiltie exchange I decided I would try a quilting technique that I have heard my Mom and sisters discuss - the faux Cathedral window.  I did a bit of searching on line to see how it was done and then headed to my craft room. I found this bright and linear print in my stash of 4"x 4"squares and thought it would be very appropriate for this technique.  I chose a solid yellow for my backer and after a bit of designing in Corel Draw I established that I needed a 5.75" circle to encompass the 4" square.  I checked the plates and bowls in the kitchen until I found one that was the right size and traced around it in pencil and cut it out the circle by hand.  Next, I added a piece of batting to my square, pinned to the middle of my yellow circle and stitched all the black lines in the design using black thread for the top and yellow in the bobbin.  I like that it made the design a bit puffy!!  Next, I folded what was left of the circle on the four sides over the square and pressed them down.  I stitched all the way around the edge and then stitched the rounded pieces into place over the square.  Thinking it needed a "bit of something" I decided to doodle inside the space I had created with the stitching using a permanent fine tip Sharpie marker.  That looked better!!  Wanting to add a bit of beading to my quiltie I decided to add black seed beads to each space I had doodled. That looked better!!  The inner section needed a bit of a focal point so I added three black sequins stitched on with black thread and black seed beads.  That was much better!!  Finished!!  It will be off to my partner later this week.

Therese

Saturday, June 06, 2015

Beaded copper pendant

I created this pendant in the process of playing with ideas for making metal art charms.  I am participating in a 3 for 3 personal art charm swap on one of my groups. For this group, art charms need to be created rather than simply assembled so I went on line looking for inspiration for metal art charms.  And for this swap, they also need to be all metal.  I found a couple of ideas that I thought were worth pursing then headed to the craft room.
I started with very thick copper wire and formed the heart using my pliers, etc.  I am not a jewelery maker so it took some time to get it looking acceptable.  Once I was happy with it, I took it outside, placed it on a heavy metal plate and mashed it with a hammer until it was flattened to my liking.  Next, I hit it with a hammer with a textured head which really helped make it look handcrafted.  DH did not mind my borrowing of his tools!!  It turned out exactly like I wanted it too!!  Next, I used thread like copper wire and added seed beads.  I also used the wire to cinch up the middle and to add the jump ring.  Once I was done and admiring my work - it looked pretty cool! I realized the charms were supposed to be all metal!!  In the end this one is really too big to be a charm so it has graduated to being a pendant and I have repeated the process with smaller shapes for creating the art charms for the swap which I will be posting later.
This was a totally fun process and yielded some very unique looking pieces.

Therese

Friday, April 17, 2015

Art Quiltie - a butterfly for April

Just finished my butterfly art quiltie for our April swap!!
 


I started with a white on white piece of cotton (4" x 4") and added two layers of die cut fabric.  I cut the main butterfly (SX) from some bright fabric backed with heat & bond and the outline from white iron on muslin. The muslin was very bright in contrast to the fabric so I used watercolours (SU) to dye it  - blue, purple and pink.  I used a black sharpie to colour the body.  After removing the release paper from the back of the large butterfly I ironed it to the white fabric and then positioned the lacy wings and the body over it and ironed them into place.  Love how it worked out!! Next I added batting and layered both of them over a larger turquoise square of cotton.  I double folded the edge of the turquoise over the white and stitched it with a running stitch all the way around with white embroidery floss.  I outlined the butterfly with purple floss and added antenna with black floss.  To add texture to the white background I used scattered running stitches in white floss and added a few pearly seed beads as I went.  Finally, I added two turquoise sequins held in place using pearly seed beads.  Love the feel of the textured areas!!

Therese

Monday, February 16, 2015

Heart Art Quiltie for February

I am hosting another Art Quilitie mingle!! The theme for February is Heart - you just need to include a heart in your design any way you wish - fabric, stitching or embellishment.
I started by cutting a 5"x 5" piece of white on white quilting fabric and stamping words on it with my magnetic Making Memories alphabet stamps in "Soft Stone" Memories ink.  The words are the qualities of love - kind, patient, polite, joyous, calm, forgiving, etc. After that I stamped a beautiful LOVE (QF) in red after making a heart outline in pencil to ensure good placement.  I stitched pearl seed beads all along the heart outline, added a 4" batting to the back and sewed on all of my white and pearl buttons starting

with the one at the bottom and adding as I went.  When I got to the middle I added the little red heart button and kept going.   Once, I was finished, I added a five inch square of red fabric over the front, stitched around the edge with my sewing machine leaving a gap to allow me to turn it inside out.  Once it was right side out, I stitched up the gap and added blanket stitch all the way around the edge using white embroidery floss. Traditionally, the line of the blanket stitch is left on the outside edge, instead I stitched mine leaving the line about a quarter inch inside the outside edge giving it a different look.
I love the way it turned out!!  I added my credits to the back using iron on fabric labeling tape, hand lettered a quote with a fine tip sharpie and embellished the whote back area with white french knots.
It will be on its way to my partner by the end of the week.  You can check out the other art quilties I have made  - October, November and January.  I am hoping to continue to get participation so we will all have a good number of pages to sew up into a project.

Therese

Thursday, November 13, 2014

Christmas Art Quiltie

I am hosting a Winter/Christmas themed Art Quiltie Swap in November on By Hand and finished my quiltie last night!! I received some fabric scraps from my daughter a while back and found some wonderful Christmas fabrics among them.  One of them is an all over pattern of this nativity scene.  I love that it is bright and includes the animals, stable and the star.  Unfortunately, because we are doing 4"x4" I had to sacrifice the star so I could keep the manger scene. To keep as much of the image as possible I also chose to construct the quiltie with my sewing machine.  I used an off white fabric with gold stars for the back and sandwiched some batting in between.  After turning it over I sewed a seam close to the edge to give the quiltie some definition.  I added seed beads to the stars on the back and added french knots in yellow in between to create a beautiful starry sky and stamped NOEL(Quietfire) in red which makes it really stand out near the bottom edge.
I started outlining the details on the front in running stitch with embroidery thread.  It gives the individual elements more definition and creates some texture.  I wanted to add a 3D element but was reticent to cover up too much of the image.  After auditioning a wide variety of options from my stash I decided to create a little shrink plastic charm that I could sew on.  I stamped JOY (Quietfire) in red on an oval of rough and ready shrink plastic, punched a couple of holes on either sides and heated it until flat.  I love the way it turned out though I should have used a larger punch for my holes because I ended up having to drill them out to a larger size so I could get my needle through them.  I sewed my little charm on the lower right hand side just by the sheep.  I created a little shrink plastic charm with my swap info as well and sewed it on the back over my starry night.
I am very happy with my little quiltie!!  It will be packaged and sent off to my partner in the next day or so.

Therese