November Card Club - Card #3 - starry night background paper with a silver embossed "peace on earth" focal element

Our last card was the fastest and it was good this time around because the stitching on the first card did take longer than usual.  I chose black cardstock for this set and added "starry night" background paper.  It is actually gift wrap that my sister bought years ago which is so sparkly and multicoloured - it does starry night really well.  The little "peace on earth" was stamped on coloured cardstock (2" x 3") and embossed with silver embossing powder.  A coordinating layer was cut to back this one to create our focal element.  I provided clear gel pens to colour the dove, earth and leaves.  I tried shimmery watercolours on the light pink one and that worked well too!!  Quick and easy!!! 

So we had a wonderful evening listening to Christmas carols and getting creative which always happens with this group!!!  We have very little snow and it has been relatively mild so it hardly feels like we are only three weeks from Christmas!!!  It was so nice to spend a creative evening with friends and get started on our Christmas!!!  Therese 
 

November Card Club - Card #2 - stamped background embellished with red dots and a multilayered pine cone with a bow

 For our second card I worked up this design for the cards.  I stamped several finely patterned green decorative paper with two leaf /branch stamps (Peaceful Wishes -SU) in several colours of green ink.  I cut them to 4" x 5.25" for the backgrounds and matched them up with coordinating cards.  I stamped the pinecone from this set with brown ink on off white cardstock  (1.25" x 2.25")  and clear embossed them.  I provided red cording for the bow which they could stitch on and tie OR tie and add with double sided tape.  Both worked well.  We layered these onto a gold layer and then to a red layer to create our focal elements.  We distressed our edges and added paper piercing as we wished.  Before adhering our background to our card front we established our layout (portrait or landscape) so we could detemine where to stamp our greetings.  The greetings were stamped with Veramark and embossed with gold embossing powder.  With all the pieces ready we added our backgrounds to our card fronts and then mounted our pinecones with 3D foam tape to finish off our cards.  Therese

November Card Club - Card #1 - hand stitched snowflake with embossing and vellum with a greeting

It was great to see my creative friends again for another session of cardmaking!!! We were making Christmas cards this month and with any hopes at all we will be able to send them and have them delivered before the season arrives!!  Fingers crossed!!     We started with hand stitching the snowflake using white perle cotton onto a square of cardstock.  You can see below the diagram I created for the holes I would need to stitch the snowflake which we used as a template for making the holes in the cardstock.  We used bull clips to hold the template to the square and then laid this onto a foam layer and used a push pin to make holes where we needed them to be.  By holding this sandwich to the light it was very easy to see any holes we had missed punching.  With all the holes we needed we removed the template, threaded our large needles with about 50" of thread and started stitching.  The diagram below gives step by step instructions for stitching one of the branches of the snow flake so we held our cardstock with one branch pointing directly up and started with coming up in hole #1 and continued until we had that one branch stitched.  Then we started on the leg that was to it's left and repeated the same procedure.  Now it was just a matter of doing it four more times and securing the two ends to the back with tape.  Everyone persevered and got their snowflake stitched with some undoing and getting back on track but they all looked great at the end.   

Next, we embossed our stitched square using a snowflake embossing folder where we could line up our snowflake with one of the snowflakes and have it perfectly embellish our hand stitched one with an embossed one.  Worked really well!!  I added lines of paper piercing with my pattern tracing wheel to the four sides of mine.  For our next layer we tore the edges of a strip of vellum, layered it between the card and the snowflake and stamped our greeting with Versamark on the vellum and embossed it with white embossing powder.  We secured the vellum with double sided tape in the area that would be covered with the snowflake and then added the snowflake using 3D foam tape.  We also added a small piece behind the greeting which secured the bottom and was not visible through the vellum.  I did add some paper piercing to mine with my pattern tracing wheel. 

I did add some tiny snowflakes to mine as I had in my sample.  Completely missed that step while we were working on our cards so the other girls missed out on that with their cards.  

Therese

Sewing - card wallet with an elastic

I made this card wallet for one of my grandsons for this birthday.  I made one earlier this month for another grandson but forgot to take a photo.  I used the dimensions that my sister, Sylvia, used for the ones she made. I uses 2 pieces of 5" x 11" - one the outside, the other the lining.  One piece of 5" elastic placed at 3.25" from the bottom edge.  You simply sew all the way around leaving an opening and turn it inside out.  The you stitch all the way around at 1/8" which closes up the opening.  Fold both ends to the middle leaving a bit of a gap so you can see the cards and stitch the ends of each folded flap to create to pockets.  You have to keep the elastic out of the way when sewing that pocket.  I made these for them so that they can carry a card or two along with a bit of cash with them instead of their larger wallets.  I added a little loop so they can use a carabiner to attach them to their backpacks or a belt loop.  Therese

Sewing - gift card holders for a project

I have worked on getting a good collection of gift card holders ready for sewing for a project I am working on.

I have put partial pockets on each end and ribbons in the middle of each side so they can be tied to secure the gift card and will look like a gift.  They can be hung on a tree for presentation.  

I will be sewing those up when I have a few minutes and will share the results when they are finished. 

Therese

Sewing - two small hot pads

I had two small pieces of wool sweater left over so I created two small hot pads with them.  I added cotton batting and two layers of cotton.  With the flannel I used to cover them and their cotton covers I expect these will hold up very well to any hot pan as well.  I tested them and there was only a slightly warm feeling after a minute of the hot iron set at cotton.  These hot pads measure 12" x 10.5" and 11.75" x 10.75". 

I will be making removable, reversible and washable cover for them  Therese

 

Sewing - hotpads using knitted wool, cotton batting, metallic thermal batting and flannel

 This was the beginning of the creation of another set of hot pads.  A wonderfully lofty wool sweater was cut up to create the core of the hot pad.   I added cotton batting on one side and stitched several seams to keep everything in place.  I added a layer of metallic thermal batting on the other side.  I tested this combination using a piece of scrap cotton over my sandwich on my ironing board and left my iron set on cotton on it for one minute and there was no transfer of heat to the ironing board. With the flannel wrap and the final cotton cover I expect it will stand up to most any hot pan.  

 I created a cover with two layers of flannel.  I trimmed the corners, turned it inside out and inserted this sandwich into the opening I had left on the long side.  I folded the sandwich into thirds to get it through the opening and then spread it out inside getting the corners to align and everything to lay flat.  After a good press I stitched about 1/8" from the outside edge which closed the opening.  Next, I added another row of stitching about 2.75" or so from the outside edge to properly secure the batting sandwich to the cover.  This piece should not require laundering as I will be making a cover for it using four different fabrics to allow the top to show off any one of the fabrics.  You can check out the other ones I made here and here.  Therese

I made four of these with the pieces I cut from the sweater.  

16" x 11.5"

17" x 11"

12.5" x 10

13" x 9.5"

Cardmaking - die cut photo with an inked card front and a paper leaf

I kept this one simple so the photo would really stand out.   The photo is one my sister Sylvia, has used in the many photo calendars we receive every year for Christmas.  They spend the year on our desks and in the new year the photos get added to the card making supplies and show up over time on my cards.  

This one was taken on our trip to Canmore a few years ago!!  I die cut it with two square Nestibilities to make a double frame.  I backed it with orange - coordinates very nicely.  I chose a blue card front and green strip which really work with the colours in the photo.  I stamped the blue card front with the "Worn" from Stampin UP which works really well for subtle colour.  The left I found in my stash and was appropriate in colour and the season.   

I will be sending it soon in hopes it arrives in time with our rotating postal strike.  Therese