Little birdie card with the Tim Holtz die

I made a few of these card kits for my March class.   I made this one up and have a few more to go but will do them up later as I have already several of these on hand.  They have fun background with something interesting on the left hand side.  I have given the bird a beak and a brad eye then mounted it to the cage and finally added its wing. I added the blue ribbon through the hole at the top and then mounted the cage to my card front to which I had already mounted my decorative paper background using 3D foam tape in the center and double sided tape on the perimeter.  I slipped my little tag onto the ribbon and glued it to the inside of my card using double side tape.  I tied a short length to the piece on the front using one knot to simulate a bow.  I added a small piece of 3D foam tape to the back of my little stamped tag and adhered it at a bit of an angle.  I coloured clear rhinestones with a green sharpie marker and positioned them in the holes at the bottom of the cage which are backed with double sided tape which secures them nicely!!  Therese