Thank you cards featuring embossed greetings, decorative paper and ribbon

 I needed a couple of thank you cards so I went to my craft room to see what I could come up with!!  I have recently been reminded about this stamp and thought it would be perfect for the cards I needed.  I stamped it twice on a scrap of white cardstock and embossed them with silver embossign powder.  I cut two white cards to fit in my envelopes and then trimmed two pieces of decorative paper from my stash of pink scraps. I added a length of pink ribbon to each tucking the ends to the back and securing with double sided tape then mounted them to my cards.  After fussy cutting the greetings I watercoloured them both to coordinate with my backgrounds and mounted them to my cards using 3D foam tape.  

Therese

Birthday card featuring some fun pink flags, washi tape and a little greeting

For this card I started with a decorative paper with pink diamonds and added five little pink flagged strips of  paper which I kept in place with a length of pink and black polka dot washi tape.  I found the greeting (Desert Diva)  in my stash, watercoloured it to coordinate, added some paper piercing with my pattern tracing wheel and then mounted it to a layer of black cardstock.  I mounted it to my card front using 3D foam tape.  Just to finish it off nicely, I added a little pink butterfly punchie!!  I am enjoying playing with my tools and using up some of my scraps!!  Therese

 

Thank you card featuring a fancy greeting, washi tape and a black silhouette of a wild flower (TH)

I combined two pieces of scrapbook paper by joining them with handmade coordinating washi tape to create a background which I mounted to my white card base.  I found the greeting in my stash.  I created this image from an oval frame which I filled with a font greeting before laser printing and punching out the shapes (SU).  I watercoloured it to coordinate.  I found the black silhouette wild flower in my stash and thought it went very well with my greeting so I adhered it to my card using white glue in a fine tip applicator.  Once it was dry, I added my little greeting using 3D foam tape.  

Therese
 

Birthday card featuring blue decorative paper, washi tape and butterfly punchies

For this card I started with a white card base and added the background I created by combining two scraps of decorative paper.  I used a length of coordinating washi tape to cover over where they join and then trimmed the tape to the edges of the card.  The birthday greeting (Desert Diva) is from my stash.  I embellished it with paper piercing uisng my pattern tracing wheel and mounted it to my card front with 3D foam tape after mounting it to a bright blue piece of cardstock.  Searching my stash I found a little flight of butterflies in coordinating blues which I mounted to my card front using double sided tape.  Finished off my card very nicely!!

Therese

 

All occasion card with a stamped coffee cup, a black strip and a geometric background

I am still making cards for my stash!!  This one features a white card base and for the background I reused a fun geometric card back with some wonderful colours.  I added a strip of black cardstock and then added a layered focal element.  I started with a stamped coffee cup which I fussy cut to have a bit of an uneven edge.  I layered it onto a coordinating piece of green cardstock which I distressed on its edges.  Once adhered to each other I mounted this element to my card front using 3D foam tape.  I did run a fine tipped black permanent marker around the edges of the coffee cup to reinforce it edges and help it echo the black strip I added.  Therese

A star card with a fun greeting, a paper pieced backgrond embellished with washi tape and a large gold star

For this card I started with a white card base and then used green decorative paper scraps to create a fun background which I held together using washi tape.  Have not used those in a while!!  I adhered it to my card, added two layered flagged strips to my background and then my embellished greeting (Desert Diva).  It has several tracks made by my pattern tracing wheel and is embellsihed with a little gold confetti star.  I adhered the large gold star with 3D foam tape.  It nicely unifies my design and creates a wonderful focal element for this great little digital greeting.  Therese
 

All occasion card featuring stitched flowers, embossed panel and some ribbon

This card started with the panel from a card I had refurbished a while back.  There were these wonderful stitched flowers which were embellished with glitter and done in shimmery thread.  I trimmed the piece to fit on my card, punched on side with a scalloped border punch and then embossed a line with my score tool.  I embossed the other side with a birdie embossing folder (CB) and then added a piece of coordinating satin ribbon over where the embossing stopped.  I added this embellished layer to the front of a lilac card.  

Therese

 

All occasion card featuring a little cactus, an embossed strip and some paste paper for my backround

Another card for my stash!!  I started with a white card and trimmed a piece of beautiful paste paper to fit with a small border.  I found a strip of coordinating cardstock in my stash, embossed it a dotted embossing folder (SU) and then flagged the end.  I mounted the strip over the background and then found this cute little cactus image that I thought would work really well.  I water oloured it to coordinate with my card and then cut a piece of dark pink cardstock to back it with to echo the colour of its little flower.  I used a border punch on the one side and after adhering them together I mounted this focal element to my card front.  Therese
 

Thank you card featuring decorative paper, layered punchies with bling and a small font greeting

 I have been working on cards for my stash on and off for several weeks now.  I am just now getting to blogging some of them.  I used a white card base and added the green and pink decorative paper background.  I found the coordiating pink and white punchies in my stash so I layered them and added little deep pink rhinestones to the centers.  Added the little flag ended greeting using 3D foam tape.  It is fun to create with what you have at hand and the discover yet more fun stuff when you go searching for embellishments!!  Therese

Tunnel card featuring an embossed label, some ribbon and a die cut image

This eighth tunnel card completes my special occasion cards for my family for the month of September. You can check out my first one here.  It has been really good to strech creatively and try something new.  It has enticed me to use the "special" paper and that has been fun too.  I have more than I will probably ever be able to use so it is time to use the peices I like and pass the others off to bless others!!  For this card I used a soft peach floral for the card and a soft peach for the tunnel.  I used a label die (SX) to cut the opening in the center of my tunnel.  I stamped and embossed the greeting and the flower (Magenta) and embossed them in copper embossing folder.  I used the same copper pigment ink to stamp the flowers onto the tunnel but did not emboss them. I trimmed the flaps with scallop decorative scissors.  I added the tunnel to the inside of my card by adhering the two flaps to the card.  I used the label die cut from the tunnel to decorate the front of my card.  I die cut a smaller label from the middle of it and turned it over and used regular tape to put it back in the opening.  It gives a really nice contrast and coordinated nicely with the copper on the inside.  I embossed it with the Swiss Dot embossing folder (CB).  I die cut a little image for inside and added it with 3D foam tape.  I used double sided tape to add two lengths of green ribbon to the front in a diagonal pattern trimming the ends to the edge of my card.  After I was finished I adhered my large focal element to my card front.  Thinking it still needed a "bit of something" I added seven copper sequins to the front.  That was better!!   Therese

 

Tunnel card featuing glittery dragonfly stickers, white silk flowers adhered with brads and an embossed and glittered label

For my seventh tunnel card I used this nice floral pink sheet that was a coordinating plain pink on the other side.  I chose a diamond pattern in light pink for the tunnel.  You can check out my first card here. I did not have an oval die big enough to cut an opening for my tunnel so I traced my largest Nestibilities and cut it out by hand.  I stamped the greeting on the inside and embossed it with silver embossing powder.  I did the same with a simple daisy and a flourish (Sugarloaf). I chalked the daisies in blue which turned them a bit of a purple which was just perfect to coordinate with the butterfly stitckers I had chosen.   I adhered the flaps of my tunnel to the inside of my card and added the butterfly stickers.  These stickers have been around for a while and required a bit of double sided tape to get them to stay in place.   For the front of my card I die cut a label from dark pink cardstock and embossed it with the D'Vine swirl embossing folder (CB) and then added embossing ink and clear embossing powder with glitter in it to give it some sparkle.  I die cut a new oval from the one I trimmed from the tunnel so it would fit inside my embossed label.  I glittered its edges as well then adhered another dragofly to the center of it.  I found this pink paper in my stash, trimmed it to size, added silk flowers in all four corner using silver brads and then adhered it at a bit of an angle on my card front.  I mounted my label focal element to it using 3D foam tape to finish off my card.  I see that I could have echoed the yellow from my dragonflies in my layout - maybe a layer of yellow behind the pink would have been sufficient.  Next time!!  Therese

 

Tunnel card featuring a large greeting on a tag, some ribbon and an embossed circle

For my sixth card I went with this wonderful brown paper that has rust on the back and dark brown for my tunnel.  You can check out my first card here.  Once I trimmed my card and tunnel I cut a large circle opening on the center fold of my tunnel to echo the circles and dots on the front.  I stamped my greeting (SU) on the inside of my card in black and then found a dotted circle frame (SU) which I stamped generationally on both the inside of my card and the outside of my tunnel.  I embossed the circle I had cut from the tunnel with a birthday embossing folder (CB) then cut it in half.  I decided on this large greeting from my stash (Desert Diva).  I toned down the white with an ivory stamp pad, added two little gold corners and then mounted it to a layer of embossed brown cardstock (Scripty - SU) which I had torn across the bottom.  The ivory tag is from my desk from when I was making these school bus cards).  I stamped it with some little circles in two different brown inks, added a bit of water to get the colours to bleed and then used the pads on the edges as well.  I mounted my greeting to the tag using 3D foam tape and then added a glittery brad which I toned down in colour using a dark brown Sharpie marker.  I added a length of ivory gros grain ribbon to the left hand side of my card using double sided tape.  I mounted the embossed half circles to the tag then mounted this large element to my card front so the brad would overlap the ribbon.  Worked out very well!!       Therese

 

Tunnel card featuring musical paper and an embossed birthday cake

For my fifth tunnel card I used this wonderful musical decorative paper!!!  I used an orangy paper on the inside for the tunnel which contrasted very nicely with the cards patterned inside.  You can check out my first card here.  I drew a birthday cake on the center fold of my tunnel and cut it out by hand.  I stamped my greeting (SU) on the inside of my card in black and then traced the shape of the cake on the patterned inside and watercoloured the flowers in yellow and oranges.  I could have used a larger bolder greeting considering the busy pattern I was stamping it onto.  I stamped a dotted circle (SU) in orange around my candle flame and then some flourishes (Sugarloaf) on the layers of the cake.  I used the cake to decorate the front of my card. Iembossed it with a musical embossing folder (CB) then cut off the candle and replaced it with an embossed (CB) blue cardstock one and then glued the paper candle to the back of it.  I used glitter gel pens to add colour and detail to the flame.  I added a blue strip to the bottom of the cake which I had trimmed with scallop decorative scissors.  I found this wonderful marbled paper that coordinated and used that as my background for the cake!!  I added the cake using 3D foam tape and then adhered this large element to my card front.   I used the same glittery gel pens to add some glow to my candle.  Really happy with how this one turned out.  I cannot make lots of card exactly the same hence the heart and the cake as openings for these last two cards.  It is really nice to use the "special" papers!!         Therese

 

Tunnel card featuring a large heart, an embossed strip and a little fussy cut heart

For my fourth tunnel card I started with some cool decorative paper in red and ivory.  You can check out my first card here. I trimmed the card and then the tunnel from a diamond patterned paper that coordinated nicely.  I hand drew a heart on the fold of the tunnel and cut it out my hand.  I stamped the greeting (SU) in red on the inside of the card and watercoloured it to coordinate.  I stamped some little flourishes (Sugarloaf) all around it. I adhered the flaps of my tunnel to the inside.  To decorate the outside I used the heart I had cut from the tunnel.  I folded it in half and cut another heart out of it.  I embossed (CB) a pink piece of cardstock and long strip of red cardstock (SX) then assembled my large element.  I ran the strip from the back to the front through the large heart and then captured it with the pink embossed layer.  I trimmed a fish tail on one end of the strip and then adhered this element to my card front then trimming the other end of the strip to the edge of my card.  I fussy cut a little heart with a bow (digital - Melonheadz), watercoloured the bow in pinks and the heart with a shimmery champagne colour.  I mounted this little heart to my card front using 3D foam tape.  Therese

hffh

 

Tunnel card featuring decorative paper, doily, label die cut and a layered heart with ribbon bow

My third tunnel card is an anniversary one.  You can check out my first one here.  I trimmed my card and tunnel, folded them and then I die cut a label (SX) opening from the center of the tunnel.  I stamped my greeting (SU) on the inside in red and then added some stamped hearts all around it (Magenta).  I adhered the flaps of the tunnel to the inside of my card and then added some coordinating heart punchies (SU) to them. For the front of my card I added a large white paper doily and then adhered the label I cut from the tunnel to it.  I die cut a small oval from pink vellum, embossed it with the Swiss Dots (CB) embossing folder and adhered it to my label.  I found a coordinating heart in my stash which I adhered tot he vellum and then added a little pink bow.  I did add some faux stitching to the label because it still needed a "bit of something".  That was better!!       Therese

 

Tunnel card featuring decorative paper, seam binding, die cuts and layered hearts

For this tunnel card I used a nice floral heavy weight paper for the card and a coordinating light weight paper for the tunnel.  You can see my first tunnel card here. After folding the tunnel I die cut the label opening and then used an eyelet border punch (SU) on the flaps.  I created an inner greeting layer the width of the space inside the card between the two flaps using a tag from Calico Collage with a font greeting and laser printed it.  Trimmed it to size, folded it in half and adhered it on the fold inside my card.  Next, I adhered my tunnel to the inside.  I used the label die cut from the tunnel on the front of my card.  I embossed it wih a distress embossing folder and sponged the edges with green.  I added two lengths of lace adhering the ends to the back with double sided tape.  I layered four hearts ( punchies and die cuts) from my stash for my focal element and added a small red confetti heart.  I mounted it to my card front using 3D foam tape. Thinking it still needed a "bit of something" I added two lengths of red seambinding (MS) to the corners.  That really was much better.  I tucked the one end inside under the tunnel edge and the other is simply adhered to the back with double sided tape.  FUN!  Therese

 

Tunnel card featuring decorative paper, label die cut, coffee vellum, fiber and a layered coffee cup

For my September family special occasion cards I decided to make tunnel cards.  I checked out several tutorials and decided to use heavy weight decorative paper (12" x12") for the outside and light weight decorative paper (12"x12") for the inside tunnel.  I made them all large cards to fit in envelopes from my stash.  

For this card I started by trimming my heavy weight paper to 11" x 8.25" or so.  The light weight paper was trimmed to 8" x 8".  The scraps will make A2 background very nicely.  I folded the inside in half and then scored 1.5" from each edge to create the tunnel.  I die cut a label shaped (SX) opening in the center fold which allows the recipient to see the greeting on the inside of the card.  I stamped the greeting on the inside of the card and watercoloured all around it in coordinating colours.  Once dry, I stamped several flowers around the greeting to be visible through the tunnel.  I stamped several extra on scrap paper to add to the tunnel edges.  I glued the two 1.5" flaps to the inside of my card laying it flat and lining up the center fold of the tunnel with the center fold of the card.  I fussy cut the extra flowers I had stamped and added them to the side flaps of the tunnel.  I used the piece I had cut from the inside to decorate the front of my card.   I cut a smaller opening in my label and then stamped it with dark brown ink to distress it.  I crumpled some coffee vellum and tore its edges to be just a bit larger than my label die cut.  I tied a coordinating piece of fiber to the die cut and glued it to my vellum and then glued this large element to my card front placing the double sided tape behind the die cut.  I watercoloured a small coffee cup (CLKER) in coordinating colours, punched it with a circle punch (SU) and then added a brown circle behind it.  I added this small element to the opening in my label using 3D foam tape.  

It was fun to do something different and my other cards will show up over the next few days as I get to blogging them.  I really enjoyed using some of the "special" papers that I have been setting aside for special cards!!             Therese
 

Slow Stitching - Houses quilt top

I have finally finished the quilt top around my Slow Stitching - Houses.  I had set aside the fabric for this quilt top a while back and was pleased to find that when I took out the little pile of fabric it made sense.  I had quite a few strips of fabric - 42" in there and also quite a few that needed to be pieced.  I started by stitching together all the strips that needed stitching including the two with little strips, the long strips, the blue blocks and the triangles.  Once I had the strips finished I worked on the layout.  I framed the houses with six strips of the same fabrics above and below.  I really like how the sky pops against the black strip.  I was fortunate to have enough long strips to be able to place one in between all of the stitched strips.  The stitching of the strips went well and I was very happy to have everything line up reasonably.  I did add two strips to either side of my houses to make sure I did not lose too much when I did the binding.  After the stitching I trimmed it to size - 41.5" x 64".  I will be adding a batting, backing and binding for finish it off.  The fabric for this quilt all came from a grab bag of fabric I purchased from a quilter who was liquidating her scraps.  I sorted them all by colour which allowed me to choose all similar colours for this quilt top.  Some of the stiching had already been done - the little strips were stitched four together and the larger strips were two together and a longer piece which I cut into three and added other strips in between.  It is so nice to have this slow stitched piece in a quilt top.  

Therese

Quilt - Red and blue crumb squares sashed with yellow fabric along with some hand stitched daisies

I have been working on this quilt (48.5" x 59.5") for a while off and on between other activities.  I started by adding yellow sashing between the 12 dark red and blue crumb squares which I made a while back.  I added a large yellow border in the same fabric as the sashing, added a thin cotton batting and a dark blue backer which I wrapped around the edge and used to bind the quilt as well.  I added a row of green stitching between the two red ones on the large border and hand stitched red flowers onto the line.  I had to be careful not to go to deep with my stitches because I added the flowers after the quilt was finished.  I am really happy with how it turned out and how well the little stitched flowers finish it off!!  Therese

 

Christmas cards with fun school bus tags on varied backgrounds

Another set of cards for my sister with school buses on them.  These are all Christmas cards and were created with the same sketch but with a variety of different papers and card bases.  These are large cards - 5.5" x 8.5" because she has a supply of this size of envelopes.  I colour printed three different images of festively decorated buses and started creating!!  I created them one at a time  - a card base, then a background that was appropriate for the image and then a die cut tag which I embellished with coordinating layers and the images.  There is some embossing, tearing, texture created with my tracing wheel, sanding of white core cardstock, etc.  Each tag has a yellow reinforcement and then a coordinating fiber, ribbon or raffia tied to the tag.  It is so much fun to just create and try different things and just keep putting together elements.  I am suprised to see that they seem to fall into three collections as they were not created that way!!         Therese