A beautiful butterfly get well card

I needed a few get well cards for my stash so I made a few.  This one features a beautiful butterfly (CLKER) which I laser printed and watercoloured to coordinate with the decorative paper.  The decorative paper was cut twice like these cards from my last class, layered onto brown cardstock and then onto a blue card front.  I added some faux stitching around the butterfly image and adhered it to the front of the card using double sided tape.  I colour washed a laser printed punchie (SU) greeting and adhered it below the focal element using double sided tape as well.
I had most of these supplies very close at hand so it was a relatively quick card to create!!

Therese

Paper pieced fabric postcard

On my fabric postcard group they issued a paper piecing challenge.  I had to research what paper piecing was to decide whether I would take the challenge.  I have to say that it was a bit intimidating to figure it all out.  Eventually, I found a pattern that I thought I could manage - a little tree.  I had to reduce the pattern to make it work on a postcard and the pieces ended up quite small so I just combined every second one to give 6 pieces in the tree and then the two side pieces.  It took some diligent following of the directions to get the first three correct. I did get one wrong and had to undo my seam and start again.  To expand the square design into a postcard I added a piece on each side.  I used copy paper to print my pattern and forgot to shorten my stitching for the first two so when it came to removing the paper it took a bit more effort to remove those two pieces.  I would not want to make a whole quilt with paper pieced blocks and it certainly would be handy to have the "add a quarter" ruler for any large project.  I am happy with my first try.  I dug all the pieces I needed from my scrap bin.  On hind sight, it would have been better to choose some more sedate pieces for the sides but I was having difficulty visualizing the end result but I think that process just gets easier the more you do it.  After adding all the pieces removed the paper and trimmed my postcard to 4" x 6", added batting and stitched along of my line using green thread on the tree and red on the side pieces.  Next, I cut a piece of white to 41/2" x 6 1/2", added fusible webbing to the edges then centered my postcard on the backer folding the overhang to the front and fusing it in place which effectively bound my project.  I added stitching in white on the side pieces to secure the backing to the remainder of the postcard.  I crocheted a single chain using some textured yarn and couched it onto the edge using the zig zag stitch on my sewing machine with green thread.  I like that look!!  To finish off my postcard I hand stitched some seed beads to the edge of my pieces on my tree.  That worked out well.  Therese

Layered scallop circles with a round birthday greeting

A birthday card for my stash that features layered scalloped circles (Nestibilities) along with a couple circle punchies including one with a round greeting.
I layered a green scalloped circle below the gray one and then added an embossed circle punchie then the round greeting punchie (The Spruce) and finally added a blue silk flower, a yellow flower sequin and attached them all together using a tiny gold brad.
For the background I started with a colour printed gray background with soft dots on it and added some doodling and a faux stitching border with a yellow marker to echo the little yellow sequin I used on the focal element.  I added a colour coordinated ribbon across the middle gluing both ends to the back of the layer before adhering this large element to the front of a purple card.

Therese

A cute owl card created with a doodle art sticker

Another card I created with doodle art stickers from my colouring books!!  You can check out the others here and here.
I adhered this one to a white base before colouring with pan watercolours.  I really like the look of this one and I expect it is because the colours are brighter.  I added a green layer to this focal element before I adhered it over the blue ribbon I added to my card front.  I had glued the rainbow decorative paper to the front of a deep yellow card to create my card base.  I love the blue and yellow together with the warm colours in the art and the decorative paper.  I added a yellow laser printed greeting which I colour washed in blue and adhered below the cute little owl with 3D foam tape. For a little bling I added glitter with a clear stardust gel pen to the little round flowers in the background, around the eyes and on the flowers and hearts on the body.  For a bit more I added clear rhinestones to the two largest flowers and also on my flagged greeting which I coloured with yellow marker to have them coordinate with the colour scheme of the card.  Really happy with how this one worked out and it is on its way to a special little girl with a birthday next week!!               Therese

Christmas cards with handmade paper trees & sequins

I am behind on getting Christmas cards done monthly this year.  These are technically my March cards!!
I started with some handmade paper triangles which I created a long while back when I was regularly making handmade paper.  I created them on a spare screen sitting on my mould and used a baster to add the paper pulp which allowed me to include a lot of texture.  I chose to let them dry naturally which preserved all the details I had created instead of couching them.  They were needing a bit of touch up in colour so I colourwashed them with green acrylic paint and I dried them with my heat gun.  Worked very well!!
I added a garland using various fibers and stitching and used sequins to simulate ornaments.  They are all different but I generally used the same sketch which worked well with the size of the "tree".
For this one I used red rick rack which I positioned with glue dots and a few dots of white glue in strategic locations.  I added large gold sequins using glue dots and overlapped them over the rick rack garlans.  I adhered the tree to the background paper and added the gold star brad.  I adhered this large element to a red card front and added a laser printed layered punchie greeting on the top right hand corner.

For the one on the left I added white fiber for the garland gluing the ends to the back.  I added iridescent white sequins with glue dots.  I glued my tree to a white shimmery embossed background then added a white snowflake brad at the top.  I tucked a laser printed greeting just behind the tree and embellished a clear iridescent sequin which I applied with a partial glue dot.  This large element was mounted to a deep plum card front.

For this one I used shiny thread and some copper blending filament in my sewing machine.  I cut a length of each and wound them onto an empty spool so I could feed them into my needle at the same time.  It worked well though I was going very slow because I was incorporating the sequins as I went.  I started at the lower right hand of the tree and started my stitching.  Next, I positioned a sequin and manually adjusted the machine to stitch just before the sequin, in the middle of the sequin and just past the sequin. I continued to stitch in a zig zag pattern up the tree adding sequins (large blue, gold and copper) in the same manner.  I returned to the bottom in the same manner but did not add any sequins on the way down.  I really like the look of the blending filament and the shiny thread!!  I glued the tree to my decorative paper and added a gold brad at the top.  This one was coloured with a gold paint marker to coordinate.  I added a laser printed layered punchie greeting to finish off my layer and glued this large element to a rust card.

For this one, I stitched a garland with white shiny thread using a long zig zag stitch.  The tension was off a bit with the top thread being a bit tight so the zigzag is not as apparent as I was expecting.  I added four small fiber snowflakes using iridescent glitter glue then added dots along the garland as well.  While they were drying I layered my decorative paper over a snowflake punched border and glued this layer to a dark green card front.  I glued my tree to the decorative paper and added an iridescent snowflake charm to the top of the tree using a glue dot.  I added a simple laser printed punchie greeting to the top left.  It still needed a bit of something so I added a dot of  iridescent glitter glue to the centers of each snowflake in the border and I like that much better.

For this one, I added a garland using silver cording gluing the ends to the back.   I added tiny silver and blue sequins using partial glue dots in a bit of a random pattern.  I glued the tree to my soft blue floral background then added a silver star sequin using a silver brad.  I glued this large element to a blue card front.  I layered a laser printed oval greeting which I had sponged with a bit of green ink over a scalloped oval of blue cardstock.

It was great to use up these little trees and get some Christmas cards made!!  I have a few more ideas so hopefully this month I will get caught up.

Therese

Doodle sticker on an embossed background with ribbon flags

Another card using a sticker from my doodle coloring books!!  This one is from the Butterfly Garden book.  I coloured it with watercolour pencils and then applied water over them with a round brush.  It is a different look than applying colour with a brush.  It is certainly easier to fill in the small spaces with a pencil crayon.  I applied this sticker to white cardstock so the border disappears significantly which works out alright.  I manually embossed the background after applying the sticker.  That was not the plan but when I gently laid it on the surface to mark off the borders I was not able to remove it so I just went with it.  I sponged the outer edge with a bit of warm blue ink and then machine stitched on some ribbon flags with white thread on the right hand side.  I like the polka dot ribbons!!  I added a layered punchie greeting just below the butterfly.  Thinking it needed a bit of something, I added little rhinestones to some of the dots on the butterfly and also a little red heart rhinestone to the body.  Adds dimension along with the ribbon.    Therese

Cards with a variety of greetings for a gift

 I created these cards as part of a gift for a young Mom who, in the last couple of week, had her second baby.
I have been wanting to develop a system for using #8 envelopes as they are more universally available and means that the cards can more easily be reused.  They are also less expensive which reduces the overall cost of the cards.  I worked out a plan that uses one letter sized piece of cardstock to create two reusable cards.  I cut two cards - 3 3/8" x 11" and score them at 6.25".  I am using the leftover scrap to add 1.5" to the back sides to complete the cards and applying a label with the instructions on how to reuse the cards which also provides stability for the added piece.  I have printed the instructions on a white label and am adding a coordinating colourwash to it before applying it to the back of the card.  I am using a single panel insert lightly glued to the back inside of the card which can easily be replaced when reusing the card.  The instruction follow the card and therefore makes reusing it more than once possible.

I created this very simple sketch and used a variety of papers that would be appropriate for baby thank yous as well as other occasions.  I provided two greetings for each card to make them flexible - a thank you and another for other occasions like birthdays, get well, etc.
So once I had created my card bases by cutting the cardstock in two, adding the 1.5" piece on the backs along with the labels I added a full piece of decorative paper on the fronts.  I added a strip of coordinating cardstock across the top portion and then added a coordinating scalloped circle (Nestibilities) over that using 3D foam tape.  I included but did not glue on the 1.75" round punched greetings so that she can use which ever one is most useful for her.  I did add double sided tape to the backs of all of the greetings so that applying the greetings would not require any tools or supplies.  I am hoping that these will provide some convenience for this young mom of two small children over the next few months.
I am happy with my design so far and will continue to experiment with sketches to see how well I can design for this format.  So far, so good!
Therese

Qulited scraps fabric postcard

I created this fabric postcard using precut triangular scraps which I received in a scrap pack.  I stitched the triangles to create squares then stitched the squares into strips that created black triangles.  I stitched the strips together to create this cool looking arrow pattern.  Once the edges were trimmed even I was a bit short to get the four inches I needed for the postcard so I added a strip of red and blue fabric which provided just the bit of punch of colour that was needed.  I added batting to the back and stitch around all the pieces.   I created a backer and stitched it to the back of the postcard with a line all the way around.  To finish it off, I decided to use one of the quotes that my sister printed for me on fusible fabric using her inkjet printer.  I trimmed this one out, fused it to the front of the postcard and then stitched on these cool little plastic embellishments.  I couched gold braiding into the blanket stitching I did all the way around in white crochet thread.  I like this nice and neat finish to this postcard.  Very happy with this very graphic fun postcard which will be off to by birthday swap partner.  Therese

Lighthouse tile in an embossed frame

I started this card with the embossed swirl background applying copper pigment ink to the raised surfaces.  I watercoloured the rest of it in blue giving it a very watery look.  Some of the copper ink reactivated and added to the cool look of the background.  I mounted it to a brown card front.  I used a stamped light house image to create a tile as a focal element.  I trimmed the image, painted it with watercolour, applied a layer of clear Versamark ink to the dry surface and embossed it with clear embossing powder.  I dunked the hot surface into the pile of embossing powder and heated it again to melt the embossing powder that stuck to the surface.  I repeated this process several more times and got a nice tile finish on the image.  It was somewhat warped so I adhered it to a piece of cardstock to stabilize it.  On hindsight, it would have been better to stabilize it before applying the ink and embossing powder.  I mounted my image into the frame of the swirly pattern using 3D foam tape.  I love the soft look of this card!.  I punched a laser printed greeting, colour washed it before punching the hole and flagging the end.  I added a brown thread to the hole, threaded it between the image and the background and tied a knot.
Therese

Owl doodle sticker focal element on my card!!

I recently purchased several colouring books full of doodle art stickers!!!  This one is from the Magical Owl book.  I watercoloured the image and adhered it to a large green label then over a ribbon on a stamped pink card front.  The stickers are very neat and some will be too large for cards but I am looking forward to colouring them and then using them in my card making!!!
I added sparkle gel pen dots on the green label and stamped the pink card front with a handmade dots stamp.  I stamped OWL... on a punched label (SU) with green ink and then added little pink dots with a marker.

Therese

Guide project - a small composition book with a fabric cover and unique art on the front

I am presenting this little project for my granddaughter's Guide troupe this week.  The goal is to have an artist in and talk to the girls about creating art.  My daughter was instrumental in the design of this fabric cover for the small composition books.  I started with a 10" x 7" of fabric and folded about 1.5" from the top and the bottom towards the center and then about the same in from both sides and pressed them well.  This creates a little pocket in which we will slip the covers of the book and use a staple to hold the cover in place.   I made some in several different colours and themes.

The focal element will be what the girls will create at the meeting.  I have prepared blanks from ivory fabric backed with Heat and Bond onto which they will create their art.  Doodle art is popular and I will walk the girls through the process of creating this art themselves with permanent markers and wax crayons.  They will have the latitude of making it their own in the choices they make as we create.  Once the art is finished it will be adhered to the front of the journal they have picked out for themselves.  They can use it as a Gratitude Journal, to keep track of their homework, as a To Do list or to keep track of their hopes and dreams!!

Therese

A card from a kit with velllum and handmade paper

I made up this card from a card kit from my last class.  I love the handmade paper background for this card and used the colour scheme to colour the image using peach, pink, green and brown.  I coloured on the back of the vellum which mutes the colour slightly and protects it from being rubbed off.  I used an embossed label punchie as the mechanical means of attaching the vellum to the stitched handmade paper background.  I used double sided tape to attach the vellum and another piece to attach the whole thing to the background.  This whole element was adhered to the brown card front using a glue stick.
This one is off to a special person having a birthday very soon.

Therese

Collage backgrounds for two special cards

I created these backgrounds last week.  I started with some watercolour/plastic wrap pieces that I created a while ago and was motivated to add some clear embossing to them.  I chose a solid petals background stamp which I stamped in clear ink and embossed with clear embossing powder.  It was interesting how the paint was affected by the embossing - seems to have altered the colour below the embossed areas.  Next, I added some stamping - a script stamp in a coordinating colour and a little postage cancellation from the same set.  

I needed two special cards this week so I used them to create what I needed.  For the left hand card, I adhered the background to a red card front, added a fun polka dot ribbon across the front and added a layered round greeting when I tied a short piece to it to simulate a bow.  The little greeting started with a round tag (CB), next a 1 1/8" vellum circle and finally a round stamped greeting (SU).  I simply included the hanging cord in the single knot of the "bow".  The focal element is a laser printed digital image from Melonheadz of a cupcake with a star.  I watercoloured the image and then followed that up with shimmery paint for a very elegant finished piece.  Once dry, I layered it onto yellow card stock and mounted it over the ribbon using 3D foam tape.  

For my second card, I adhered the background to a green card front, added a gros grain ribbon gluing the ends to the inside and then mounted my focal element using 3D foam tape.  The fish image is one I got in a swap!  I coloured it with shimmery paints and watercolour.  I added the background just using my paint brush to add the details.  The image was layered onto brown before being mounted to my card.  I added a laser printed layered punchie greeting on the lower left.

Therese

A fun guy card

This card started as a sample for this class but when I failed to cut the decorative paper accurately I was forced to abandon it and start over.  It has been sitting on my desk and I decided that I would reinvent a sketch for it.  So I added a ribbon across the front of the layered decorative paper and then created a large focal element that features an old time bicycle along with a fun greeting!!  I watercoloured a bit of a shadow for the bicycle then I layered it onto brown.  Next, I cut a blue rectangle that would accommodate both the image and the greeting (Desert Diva) which I colour washed a bit to coordinate with the image.  I added a short piece of a die cut zigzag border in between which I found on my desk.  I used 3D foam tape to adhere this large element to my card front.

Therese

A card from a kit with a few extras

I created this card using supplies from a card kit I created for this class.  In the process of creating it I was inclined to include a few extras such as adding strips both above and below the greeting, sponging the edges of the laser printed greeting as well as using 3D foam tape to highlight it and embellishing the leaf with clear dimensional paint!!  These fun upgrades created a unique card that has a bit more texture than the original.
It was fun to add a few more touches to this card from a kit.

Therese

Mother's Day cards reusing calendar photos

Both of these cards feature my sister's photography!!  She creates 4" x 6" calendars every year that feature her photos and I always get one for Christmas which sits on my desk all year long.  These photos are both from one of her flower ones from several years ago.  I trimmed the photos from the calendar pages and mounted them to coordinating cardstock layers which I had embossed with border embossing folders (SU).  I used the coordinating border die to cut the bottom edge of the pink one.  I could have done the same on the other but I had not left enough room to make that work.  I added coordinating ribbon across this layer gluing the ends to the back with double sided tape.  I added a little sponged tag greeting on the blue one with a silver brad and tied on a piece of white fiber which I tied in a bow.  On the left hand one, I used a punched greeting created using a digital frame (SU) with a font greeting in the center.  I punched a circle to fit the circle size and sponged some pink ink into the center after placing the hole over it.  I placed the punchie over this area and sponged green ink all the way around the edges.  I added some clear rhinestones over the circle then mounted the greeting over the ribbon using 3D foam tape.  I glued these large elements to coordinating card fronts.  Love how these turned out!!  

Therese

Mother's Day cards created from renovated card fronts

These cards reuse card fronts though there was a bit more work involved than just layering.
For the top one I trimmed the image using a decorative label (SU) then I trimmed off the sides as they were distracting from the heart image.  I used my handmade stamp positioner to stamp a greeting (SU) on the lower right hand side.  I added a pink silk ribbon and tied on a short length with a single knot to simulate a bow. I layered this element to the back portion of the card which featured pink stripes.  Fortunately it covered a printed panel at the same time.  I trimmed that out and layered it to blue cardstock then to an off white cardstock layer before gluing this whole element to a pink card front.  I did distress the outer edges of the blue and off white layers with my distress tool (SU).  Happy with this card!
The lower left hand card, I trimmed out the framed floral element then cut out two of the embellished corners from the card.  They fit perfectly side by side on my pink card front!! I did add a pink ribbon before adhering the floral image in place.  I used a laser printed digital image (SU) of a label to which I had added a greeting for my greeting.  The printed greeting was h I die cut with the smaller version of the one I used above.  I punched a hole that coordinated with the center portion of the greeting and sponged some pink ink in the hole.  Next, I covered this area with the punchie and sponged all the way around with ink until I was happy with the colour.  I mounted it over the ribbon with 3D foam tape.
The right hand card below had a butterfly with a clipped wing on the right hand side once I had trimmed the floral image to fit my yellow card front.  I decided to trim it just a bit more so I could add a dark brown layer in between which highlights the punched border (SU) I had added on the bottom edge.  To cover up the butterfly I trimmed a printed greeting with my decorative label punch (SU) and then I punched an orange one to highlight it.  I layered them, trimmed the right hand side and then added a little yellow bow using heavy thread which I tied on.  Once I glued it in place I glued this layer to the brown one and stitched around the edges avoiding the floral elements which were very close to the edge.  To finish off my card I glued this large element to my yellow card front.  

My stash is growing and I am loving the cards I made!!  

Therese

Mother's Day cards from card kits

I made up these two card from card kits that I have on hand from a while back.  For both of these, I cut the decorative paper twice - once vertically, once horizontally though I did angle the second one a bit which created a different effect.  The pieces are glued to the layer leaving a bit of room between them and all around the edges then it is glued to the coordinating card front.  Both of these have layered greetings created from round digital images.  The round greeting image is one I found on The Spruce.  I added a silk flower and some leaves with a sequin and brad to the one on the left which I had laser printed as is. On the right hand one, I digitally added a little flower digital image from Meljens Designs before laser printing and watercolouring it.  I sponged both with a bit of colour before layering them onto coordinating scalloped circles which I cut using Nestibilities.  I added dots on the pink one using a silver gel pen.  Cards from kits is always very quick because part of the work is already done!!  Nice to have a few of those on hand.        

Therese

Mother's Day cards created reusing card fronts

Mother's Day is coming and I am preparing a few cards for my stash.  I decided to see how many I could make reusing old card front which have been donated to me.  

For the first card I trimmed out a floral element then gold embossed a greeting on the lower left, added a pink foil layer and glued this large element to a light blue green card.  I added a beautiful pink silk ribbon gluing the ends to the inside of the card and tied on a short length with a single knot to simulate a bow.  I slit the spine of my card to insert my ribbon before gluing.  

For the right hand card, I pretty much repeated the process.  I trimmed the beautiful rose image, silver embossed a greeting, added a silk ribbon with a simulated bow and glued this large element to a coordinating red card front.  

For the center card it was a bit more complicated.  Once I had trimmed out the floral image there remained some writing on the top right hand side so I created a "patch" that coordinated, layered them and punched both layers at the same time.  Next, I positioned my patch in the opening and taped it into place on the back.  I added a small silk flower over the area and secured it with a rhinestone brad.  Next, I wanted to add a ribbon down the right hand side so I removed the flower/brad and ran the ribbon between the tines of the brad and reassembled the embellishment.  I glued the ends of the organza ribbon to the back of the layer and tied on a short length to simulate a bow.  Like how that worked out!!  I had no greetings that would fit in the open spaces so chose to punch a hole and mount a small sponged greeting to the back instead.  I added dots all the way around using a silver gel pen.  I glued this large element to a coordinating light blue green card front.  

Some times reusing a card front takes more time than creating from scratch but it is nice to be able to reuse those beautiful images.  

Therese

A few more Easter cards

 I made up a few more Easter cards for my stash!!  These two were created using one used greeting card with beautiful crocuses on it.  I cut around the crocuses from the front of the card and layered it on an embossed purple card front and added a layered punchie greeting.  

For the second card I used the image on the inside of the card and trimmed it to size.  I added a yellow organza ribbon to which I tied a short length with one knot to simulate a bow.  I glued this large element to a purple card front.  I added a laser printed layered punchie greeting to the lower right.   

For this card, I layered two coordinating pieces of decorative paper to a purple card front and overlaid a white ribbon where they met.  I cut a slit in the spine of the card with my slot punch (SU) so I could insert my ribbon before gluing both ends to the inside of my card with double sided tape.  I stamped an Easter greeting in dark green (SU) and punched it out with a 1.75" punch (SU) and then layered it onto a purple scalloped circle which I cut with my Nestibilities.  I sponged the edges of my greeting before gluing it to my circle and then adhered this element over the ribbon using 3D foam tape.  I love this crocus paper!! Reminds me of heading out in the spring with my aunts on the farm to find the wild crocuses!!

Therese