Easter card featuring a striped background, a bouquet of flowers on vellum and silver cording

Another Easter card for my stash.  I started with a yellow card that coordinated with my muted striped background.  I watercoloured my floral (Beccy's Place) vellum image from the back and added to to a white rectangle once it was dry using some glue very gently applied to the back of the painted areas.  I added a silver cord across two opposite corners and tied a bow.  I add a tidy dot of white glue to ensure the bow did not come loose.  I mounted this focal element to my card using 3D foam tape.  Having now had sometime to think about this card I remember that I have used chalk in the past to colour vellum because water causes it to buckle.     Therese

 

Easter card featuring a yellow sunburst, a watercolour background and a cross

I am making a few Easter card to supplement the two I already have on hand.  

I started with an orange card and added a handmade watercolour background which had lots of bright yellows and oranges in it.  The yellow sunburst was given to me by my sister when she heard I was giving a go at making cards with starburst backgrounds.  I adhered it to my card and trimmed the rays to the edge of my card.  I found this cross image in my stash and watercoloured it to coordinate, layered it onto a brown circle (Nestibilities) and mounted in the middle of the sunburst with 3D foam tape.  I adhered the little greeting to a brown label (Modern label punch - Stampin UP) and mounted it to my card using 3D foam tape.  I really love the colours on this one!!

Therese

 

All occasion card featuring an airplane postage stamp, an embossed label and an aircraft background

My last card for this series of all occasion cards!  I had more than I needed which was good because I was able to pick and choose the best for my friend!

This one started with this beautiful postage stamp with an aircraft on it.  I mounted it on a red rectangle and then worked on a label to highlight it.  I die cut the label (Tim Holtz - Sizzix) from gray cardstock, embossed it with clock faces which are very important in the world of aviation and sponged the edges with dark blue ink.  I created a navy card and mounted an airplane background which I had previously sponged with a few clouds.  I threaded through a navy grosgrain ribbon and adhered the label to my card front with double sided tape.  I mounted my postage stamp over the ribbon using 3D foam tape and secured the ribbon ends to the inside of my card with double sided tape.  It still needed a bit of something so I tied a red and orange ribbon to the navy one using a single knot.  That was better!!! It nicely echoes the colours on the fuselage of the aircraft.  It has been so much fun making these cards and trying new techniques and sketches.  

Therese

 

All occasion card featuring an embossed butterfly background, black ribbon and a gold butterfly

I have been rustling through my stash looking for interesting paper and embellishments to make all occasion cards with.  I always make wonderful discoveries!!  I found a sheet of this stamped vellum which has little butterflies (Magenta) stamped all over it which are embossed with a black glittery embossing powder.  It was stamped quite a while back.  I trimmed out a background, layered it onto gold metallic paper using very thin lines of white glue behind the lines of the butterflies and then mounted it to a black card front.  I added a piece of black grosgrain ribbon across my card using double sided tape.  I found this gold metallic butterfly in my stash, trimmed a circle of black velvet cardstock (Nestibilities) and adhered my butterfly to it using a gold brad.  I auditioned this element on my card and decided I needed a bit more gold so used gold cording to create a bit of a whimsical frame to my butterfly layer.  I used double sided tape on the back to secure the ribbon as I created my loops.  After I was finished I secured them all with regular tape.  I mounted this focal element to my card using 3D foam tape.       Therese

 

All occasion card featuring a vintage sunflower image, gold photo corners and a coordinating background

For this all occasion card I started with the sunflower image which is laser printed on white cardstock (Pixabay).  Once trimmed out I found this cool geometric background in my stash and mounted my sunflower to it using gold photo corners.  I added a layer of metallic gold paper and then mounted this large element to the front of a green card.  Love the simplicity of this card and how well the elements coordinate!!  Therese

SISTER STASH - Christmas with vintage collage decorative paper and Christmas tags from Graphics Fairy

I made three more cards for my sister's Christmas card stash from the supplies she left here a while back.  These ones feature some beautiful decorative paper with the look of a vintage collage.  I cut out two pieces (8.25" x 5.25") and used the scraps to create the card above.  I created a tan card and added the two scraps trimmed to fit on my card.  I embossed the cut off from the card front with a script embossing folder and fish tailed the end.  I added a shimmery brown vintage seam binding over it tucking the left edge to the back and securing with double sided tape and trimming the other end with a fish tail to coordinate with the strip below.  I add this element to my card over the gap between the papers.   The six  Graphic Fairy tags were in a PDF which I printed on an ivory sheet of cardstock.  I trimmed out all six tags and chose this angel one for my first card.  I added a large brown eyelet to the top with my Crop a Dile and tied in some taupe cording leaving the ends to tangle to the left.  I decided to tuck them behind the 3D foam I put on the back when mounting my tag to the front of my card to keep them in place.  Love how it turned out!!!

For my next two I used dark brown cards.  I added brown grosgrain ribbon to the backgrounds adjusting the placement to leave as many images whole as I could.  I added three eyelets to each of the ribbons and then adhered the backgrounds to the brown card fronts.  I added a large brown eyelet to each tag, added some taupe seam binding using an over hand knot then added the tags to my card fronts using 3D foam tape.  I trimmed the ends diagonally on both.  I decided to not any other greetings as there are some on the tags and papers.   Therese

An all occasion card featuring a cute little grapevine wreath, linen and gold ribbon and a burlap bow

Yet another all occasion card!!  For this one I started with a green card front, trimmed out a leafy background to which I added a length of this beautiful linen and gold ribbon which I fishtailed on the bottom.  This ribbon was on a gift I received a few years ago from my daughter  - I just love it!!  I adhered my background to my card.  The little floral grapevine wreath is from Melonheadz and was laser printed on ivory cardstock and trimmed out.  I watercoloured the wreath, ran my pattern tracing wheel on all four sides to create texture and then used my distress tool on the edges as well.  I added a peach layer then adhered this focal element to my card front with 3D foam tape.  I still needed a bit of something so I tied two lengths of burlap threads into a bow and added it to the corner using a glue dot.  It did the trick - just the right colour and lots of texture too.    Therese

SISTER STASH - Christmas card with a paper pieced background, red corrugated paper and a Christmas tree (digital)

This card nicely used up most of the scraps I had left over from making my last two Christmas cards for my sister.  I trimmed them to size and used the corner rounder on opposite corners.  I like that this creates a natural place for my focal element - a cute little tree ( Craft Starters digital).  I laser printed it onto white cardstock, trimmed it out and then watercoloured it to coordinate with my tree paper.  I added a green layer with an even margin and then layered that onto a piece of red corrugated paper which I tore on the top and bottom and cut neatly on the sides.  I mounted this focal element over the intersection of the gaps in my background using 3D foam tape.  This one is finished without a greeting.  Therese

 

All occasion card featuring a stack of coffe cups with little ribbon flags on a wordy brown background

For this card I laser printed on white cardstock a digital from Beyond the Fringe Crafts - this beautiful stack of coffee cups!!  I used a tiny brush and watercolour to paint all the cups.  They all have such character that bright colours work really well with them.  For some continuity I painted all the handles brown along with the saucer at the bottom. I added a bit of a shadow as well.  I layered it onto a rectangle of red cardstock once it was dry and added some bright ribbon flags on the left hand side.  I created a dark brown card, added this fun wordy flash card background then adhered my focal element over it using 3D foam tape.  Love it!!        Therese
 

SISTER STASH - Christmas card featuring fun tree paper, a wonky little font greeting and a layered die cut tree

This card started with a large red card to which I added a full background of this fun Chirstmas tree paper.  I found this green tree die cut in my stash and added a red triangle in behind which nicely filled in the openings and finished it off with a little yellow star punchie.  I added a strip of green cardstock across the card just above the middle which I textured with my pattern tracing wheel.  I added my little tree over the strip using 3D foam tape.  I found this fun font Merry Christmas in my stash which had been trimmed a little awry so I trimmed it again giving it a wonky look.  Next,  treated three sides with a row of paper piercing with my pattern tracing wheel, tucked the left hand side behind the tree and adhered it into place.  I really love this fun paper.  Very versatile in regards to finding  coordinating colours.   Therese

 

An all occasion card featuring little heart, a large frame with a little fiber bow

Still working on all occasion cards!!  For this one I started with the little stamped heart - Stampin UP with black Versafine ink on off white cardstock.  I very lightly watercoloured the flowers in the heart with a tiny brush and then added a light blue watercolour wash to the rest of the heart.  I mounted this image behind a large ivory chipboard frame I found in my stash.  I auditioned several papers and found that this one coordinated the best so trimmed out a background and adhered it to a gray card front.  Thinking that it needed a bit of texture I used a needle and threaded through a length of ivory fiber and tied a little bow on the right hand side of the frame.  I did add a tiny dot of white glue so the bow would not undo.  I added 3D foam tape to the back of the frame and adhered it to my embellished card front.  Soft and elegant with a dash of colour!  Perfect!

Therese
 

SISTER STASH - Christmas card with fun tree paper, a die cut tree frame and a Merry Christmas greeting

For these next few cards I have switched gears and found a new sheet of decorative paper!!  This is a fun one with lots of colourful trees in every configuration.  

For this card I started with a large blue card, added a full background of the tree paper leaving a small margin all the way around.  I found this die cut tree piece in my stash and auditioned it over my background and discovered that one of the trees showed up really well in the opening.  I sponged the edges with a bit of blue ink and added it to my card front using 3D foam tape.  The edges seemed to get lost a little in the white background so I added two blue strips which I had already textured with my pattern tracing wheel tucking them just slightly under the top and bottom of my tree layer.  That was better!!!  I rescued the Merry Christmas greeting from my stash, added a row of paper piercing on the bottom edge and adhered it just tucked neatly to the bottom edge of the bottom blue strip.  Another card for my sister from her stash of paper crafting supplies.  Therese

Three all occasion cards featuring heart embellishments, decorative paper and ribbon

A few more cards that feature the embellishments I made with Liquid Glass.  These hearts (Calico Collage) were colour printed and cut (Circle Scissors Cutter) then had one layer of Liquid Glass embossing powder applied to them which left them with lots of shine and some texture.  

For my first card I layered my heart embellishment onto a brown scalloped circle (Nestibilities).  I created a green card and added my torn vintage paper background.  I watercoloured the white torn edges with a bit of a rust colour so they worked better with my colour scheme.  I added a piece of wide folded apricot coloured ribbon to the back of my embellishment and then adhered this large focal element to my card front over the torn edges.  

 

For my second card, I created a red card front.  I added a length of green vintage seam binding to my floral background, adhered it to my card front and then added my heart embellishment using 3D foam tape.  I finished off the card by tying another piece of the same seam binding to the one on the front with a single knot to simulate a bow.  

For my third, card I added three pieces of folded ribbon to the back of my heart embellishment - two vintage brown silk and the other a deep red satin.  I trimmed out a background from a leafy scrapbook paper,  added a strip of brown cardstock and then a length of brown lace over it adhering the ends to the back with double sided tape.  I adhered this background to my brown card and added the beribboned embellishment over the lace using 3D foam tape.  

I liked the one layer of Liquid Glass with its shine and texture so I did not proceed to creating Cracked Glass with these ones.  

Therese

SISTER STASH - Christmas card with glittery ornaments, fun stars and dots paper, a sanded and embossing strip and a Joy to the World greeting

I started this card with a large red card and then I added a layer of the star and polka dots paper leaving a small margin all the way around.  I added a strip of embossed and sanded light green white core cardstock to a scrap of the ornaments paper then layered this piece onto red cardstock.  Was nice that the two red dots remained visible.  I found another Joy to the World (Desert Diva) in my stash.  I coloured the ornament with coordinating gel pens, rounded the corners and layered it onto red before adding it to my card front using 3D foam tape.  It was fun to find this coordinating paper that coordinated with the ornament ones.  Can certainly appreciate coordinating paper packs more now than before.  Makes short work of finding the perfect paper to go with another one.  Therese

All occasion card featuring a large poppy embellishment, embellished background paper and three little black dots

This is the largest Cracked Glass embellishment I made in my last creative sideline.  I did not crack this one too much because I was afraid that I would lose some pieces from the middle section.  I love how it has wonderful colour and depth.  I started with an A2 black card.  I found this wonderful paper that worked very well with the poppy  but it had too much white in it so I simply applied a yellow colour wash to it and it worked so much better.  I trimmed it to size for my background, tore the bottom edge at an angle and adhered it to my card front.  I adhered my "cracked glass" poppy embellishment (Calico Collage) with double sided tape and then added three little black dots (circle punchies) below it on the right hand side.  Done!!  I love the colours of this card and its simple elegance.  Therese
 

SISTER STASH - Christmas card with glittery ornaments, wavy glittered paper and a small Merry Christmas greeting

For this card I started with a large red card and pieced together a layer made up from the ornaments paper and the wavy glittery paper.  It was fun to be able to use to pieces with the peachy ornaments on them.  I added a very thin strip of red cardstock just below the first star ornaments which I adhered with white glue.  I found this little Merry Christmas in my stash, rounded its corners and mounted it over the red strip using 3D foam tape.    Therese

All occasion card featuring a collage including a cracked glass floral embellishment, ribbon, a heart charm & a key

I made up a few Cracked Glass embellishments for this series of cards I am making upon the request of my friend for a few to have on hand.  I was ready to get started and could not find my UTEE (Ultra Thick Embossing Enamel).  Needless to say, I was completely distracted and dug through drawers and boxes to no avail.  The next morning, with a clearer head I found Liquid Glass in my box of embossing powders so I just decided to use that and I will resume the search for the UTEE at a later time.  The Liquid Glass worked very well and I was able to finish the few embellishments which I had prepared.  

The rose and book page embellishment is one of my cracked Glass pieces.  I started with a black card front then trimmed a vintage script paper to size for my background and used my distress tool on its edges.  I added a length of black grosgrain across my background tucking the ends to the back and then a folded length to that piece using a tiny brad.  Next, I went looking for collage elements which I could incorporate.  I found an ornate gold heart charm, a little key and several old postage stamps that were in the right colours.  I started by adding the rose embellishment at a bit of an angle and then added the heart charm with a tiny gold brad and the key with another after adding a length of gold cording to it.  I tucked the ends of the gold cord under the heart charm edges to keep them in place. I added the postage stamps randomly where they looked good.  I adhered this large element to my black card front to finish off my card.  Have not made a collage card in quite a while. It was fun to stretch my creative muscles and come up with one that I was happy with.   Therese

SISTER STASH - Christmas card featuring glittery ornaments, a stamped background and a jingle bell greeting

 This card started with a large red card.  I used a long script stamp and silver ink to embellish my card front.  I trimmed out the green panel and added two ornament panels.  I trimmed the right hand side with a scallop border punch (Stampin UP) and then added an embossed line with my score tool.  I added dots of glitter to the scallops using a clear glitter pen.  The little greeting is laser printed on white then punched out.  The jingle bells are from Arthur's Clipart and I created a round font frame for them in Corel Draw.  I coloured the bells and holly with gel pens in coordinating colours and then mounted it to a scalloped circle punchie.  I added this little greeting to my card using 3D foam tape.  Therese

Three all occasion cards featuring decorative paper, burlap squares and embellished leather leaves

For these three cards I started with brown cards in slightly different colours to coordinate with the different backgrounds I used. The top one is scrapbooking paper, the bottom left is decorative paper which I stamped with two different maple leaf stamps and the third started as a letter press background (brown ink on ivory cardstock) I printed a while back and was embellished with watercolour, stamping, and embossing before I was happy with it.  The burlap squares were cut from a larger piece and the edges were frayed.  I saved the threads for using on future cards.  In this case, I tied several strands to the leaf stems.   I used a good layer of glue (glue stick) on the back of the burlap to adhere it to my card fronts and pressed them while I was getting my leaves ready.  The leaves were cut a while back from a variety  of leathers I had on hand at the time which is why the colour of the leaves vary.  I wanted to add some texture to them so I used a wood burning iron with a very fine tip to incise the veins into my leather leaves.  I was not sure it would work very well but I am very happy with how they turned out.  I mounted the leaves to the burlap with double sided tape.  Really happy with how these turned out.  

Therese

 

SISTER STASH - Christmas card featuring glittery ornaments and a Merry Christmas greeting (digital)

I am really enjoying making cards with this ornament paper I found in the paper crafting stash my sister left at my house a while back.  I started with a large bright green card and I added a panel of red cardstock to which I had adhered a variety of pieces of the ornament paper.  I cut two strips from the wavy glittery paper, one for each side of the panel.  The little laser printed greeting is a digital from Desert Diva.  She has a large variety of greeting digitals on her site. I rounded the corners, sponged on a little green ink to soften the edges and added single clear rhinestone before mounting it to my card front using 3D foam tape.   Therese