New craft space!!!

My new craft room - left & right!!!  I have been away for a month - visited with my sister for her vacation, visited with my daughter and her family - lots of time with my grandchildren and got a chance to spend some time with my son as well.  While I was away my DH has been working hard creating my new craft room from scratch!!  There's a only a few things left to be done so I took some time this morning to restructure my Gracious Living storage carts so they would all be the same height.  While I was at it I nipped the stops a bit on the bottom of the large drawers so they can be easily removed which allows access to the whole drawer!!  Been meaning to do that for a long time. We moved the whole bank of carts to under the window this afternoon and zipped them together with cable ties to make the whole thing very sturdy.  We hope to get the large shelving unit in there tomorrow morning which will leave the dresser and the file cabinet for the afternoon!!
The left hand side of my room will be used for storage but that does mean that I have to start sorting and culling before anything gets brought into my new space!!
I am blessed!!  I am hoping to be creating in there by the weekend!!

UPDATED - October 8, 2012
I have been crafting in my craft room - refurbishing cards for donating!  You can see them here and here!  It is soooo nice!!!  I took this photo this morning after clearning up my desk from the last few days.  You can see my bookcase on the left which needs to be filled, my bank of plastic carts, my wooden shelving and my file cabinet lined up against the outside walls.  My desk and the dresser are in the middle of the room and create a island.  I love having everything so handy!!  I am finding it so much easier to just put tools and supplies back in their homes!!
Needless to say the other side of the room is still suffering from clutter so I will have to update that later.
Therese

Thank you cards

I made up these cards to send off to the two great places we stayed at for our vacation this summer.  I folded a 4" x 12" piece of cardstock at 4" and 8" and then folded the two ends diagonally so the folds would meet over the center section.  I added triangles of decorative paper on both front flaps, layered a ribbon over the middle and captured it with the 3D foam tape I used to attach the focal element which is only glued to the triangle on the left hand side.  I watercoloured the stamped image (Magenta) and layered it to a square of coordinating cardstock. Just a square paper insert for writing on.
We had a wonderful vacation this summer in PEI.  We stayed at a wonderful Bed and Breakfast in Edmundston, NB on our way down called the Au NIDaigle run by Norma Daigle.  Large, bright, very well appointed rooms with private baths, lots of common areas, great grounds, great food and a very friendly and helpful hostess.  Check out her website!!
In Prince Edward Island we rented a wonderful little cottage only a short drive to a GREAT beach and situated on a lot next to the owner's house at St. Peters Lake, near Lakeside, PEI.  Ferne MacEwen is the owner of this little gem and she is wonderful to deal with. The two bedroom cottage has vintage decor and is neat and clean and very quiet.  She rents by the week from June to October but we would recommend going in August when the ocean is at its warmest. We checked out LOTS of beaches on the island and the best are facing the St. Lawrence on the Atlantic side - beautiful sand in long stretches that will take you hours to explore punctuated with red rocks and cliffs which are distinctive to PEI.  Check out this link for Ferne's  contact info or check out the 2012 PEI Visitors Guide on Page 181 for more information.  In the future, you can check the current edition under The Points East Coastal Drive, Cottages, Lakeside for her listing.  Most beaches in PEI have some beach glass - beautiful little nuggets of glass that have been worn by the motion of the sea and sand  - but we found the beach at Souris to be the most prolific. Be sure to go at when the tide is going out (low tide) which leaves the shore and sand bars exposed for exploring!!
Needless to say, I would highly recommend a vacation in PEI to everyone!!  It is a special part of Canada!!

Therese

Yet more acetate cards!

These are the final three of the acetates I discovered in my stash earlier. Here and here are the other cards I created with these.   I went in a different direction this time and backed them with restructructed paper which I created a while back.  I really like the look of the random colours behind the acetates so I kept the colour scheme monochromatic.  For a textured accent I pulled out my border punch (SU) and created some lacy strips using kraft cardstock and added some stitching with black thread.  I love it!!  So many possibilities for combining this punch with thread - my head is full of ideas!!  I layered the stitched strips to a black strip that was trimmed with decorative scissors, attached that to the acetate with double sided tape and then attached the acetate to the decorative paper using double sided tape behind the strips.  I used mini brads to attach the whole element to the card front!!  I can see using the little mini brads with the lacy strips as well for creating decorative elements for cards.

More acetate cards!

 I found these printed acetates in my stash and thought they would go well with the paper napkin I used to clean up my alcohol inks when I was creating my previous acetate card.  I used Sharpies,  rubbing alcohol and a cotton swab to colour the images on the back.  I simply applied a bit of blue on the petals with the marker and moved around the colour with a  swab dampened with alcohol. In the same manner, I added yellow to the centers and green to the leaves.  The colour coordinated very nicely with my background paper.

I applied white glue to the back of the acetates - same side as the colour - and placed them on the coloured paper napkin and left them to dry.  Once dry, it was easy to trim the napkin to the edge of the acetate.  I added a white layer below the acetate to help brighten the flowers because placing them directly on the cardstock dulled the colours too much.  I added a length of seam binding between the image and the greeting, gluing the ends to the back and tied on a short piece to simulate a bow.  I attached this element to my card front with four brads.  This was a stash buster!!  The background paper napkin didn't even make it to the stash as it was still on my work surface!!
I really love the watercolour look of the background!!  Save the paper towels or wipes you use to clean up to use as backgrounds for future projects!!

Therese

Acetate and sticker card

On AFTCM, I joined a swap that requires that I create an elegant acetate card that includes a sticker.    It took a bit of time to come up with the layers for this card to insure that no glue or brad tangs were showing but it finally came all together.  I started by cutting a piece of acetate that when folded in half fit in a large envelope.  I cut another piece of acetate for my focal element, applied my sticker - a vase of beautiful sunflowers - to the front.  I used alcohol inks on the back of this layer to create a soft watercolour look.  I lifted the vase part of the sticker and added a piece of yellow vintage seam binding over the acetate and glued the ends to the back.   I layered some decorative reflective foil to the back of this acetate and attached it using some double sided tape behind the sunflowers. I added this element to the card front using four brads through all the layers.  To cover up the brad tangs I added an embellished layer of green cardstock slightly larger than the element to the inside of the card front using four large glue dots on the brad tangs and a couple piece of double sided tape in the center area.  I had punched the one side of the green cardstock using a scallop border punch (SU) and pierced the scallops using a push pin.  To the inside back of the acetate card I added an embellished layer of white cardstock using large glue dots in the corners.  I had previously border punched one of the edges and added some dots and stitching using a coordinating blue gel pen.  To cover up the sight of my glue dots on the back of the card I added four small sunflower stickers.  To finish it off, I tied a small length of seam binding to the piece on the front with a single knot and tied on a sticker embellishment which I created using two round tag shaped clear stickers with a little sunflower sticker sandwiched in between.
Really love the dimension and interest created by that reflective foil I placed behind my acetate.  It has been in my stash for YEARS!!!!!!!!  Saved this foil wrapper from a KitKat bar when Lost World was the movie to see!!
Enjoy the last of the summer before the kids head back to school!!

Therese

Single Panel Thank you cards

I made a few more of these panel cards for my daughter to use as needed for her Stella & Dot
Trunk Show hostesses.  You can see some of the other ones I have made for her here and here.
I used several graphics from the Lattice Collection  from The Graphic Fairy's blog for backgrounds called The Background Fairy as the the main elements for the cards and just added Thanks in a flourished font.  I colour printed these cards - three to an 8.5" x 11" and simply cut them apart.  They are quick and easy!!
Therese

More little fabric quilts

Had the opportunity to make a few more of these little fabric quilts in the car on the way home from vacation.  You can see the first ones I made here and you can check out the link to the tutorial as well.  I expect I will do a few more before I start sewing them together to make a Teesha Moore style journal/book cover.  These are quite different colours and fabrics from the last ones.  With the other sides all different as well it does give me a few options when it comes to creating a cover.
We had a fabulous PEI vacation!!  If you have never visited this little island I would most highly recommend it - great beaches, great food and great people!!
I will have a few more creative posts later as I unpack from vacation and get my photos downloaded.

Thanks for dropping by!!

Therese

Serendipity squares - Christmas

The second card I made was a Christmas one which features four serendipity squares layered onto gold cardstock, a bird image from Meljens Designs which I coloured in with pencil crayons and layered in red and green and a stamped greeting all layered over an embossed card front.
Had a fun afternoon!!

Therese

Serendipity squares card

I had a young friend/cardmaker over today for a play date!!  I made a couple of cards and she managed one and brought home the pieces she had picked out for her second one because we decided to spend some time at the park instead.  I love the way kids are so free to just do art!!
In the process of cleaning a shelf in my craft room I came across several pieces of serendipity collage so I trimmed them down into 1.25" squares to use as the focal points on our cards today.  I cut out some coordinating squares for layering, put out some images and greetings and a few items for embellishing like the border punched accents on this card - like a little smorg for creativity.
This is a quick and easy card.  I layered the serendipity elements on coordinating squares and framed them off with some bordered punched paper lace.  I layered a strip of coordinating card stock below the paper lace to "colour" the flowers and used a glitter gel pen to highlight the center of the flowers and the doily border.
So I encourage you plan a play date with a young card maker and have some fun!!

Therese

Christmas card - O Holy Night

I just love Splitcoast Stampers for the wonderful inspiration it provides for all card makers - me in particular!!  I have seen several cards using a wonderful nativity stamp so I challenged myself to create something similar with digital images.  I started with the Mary, Joseph and baby image from Two Heart Designs and added a stable which I drew in Corel Draw around the figures.  I drew the star and added it to the stable.  I am happy with the way it turned out!!  I layered my digital image over some digital sheet music which I downloaded from Free Vintage Digital Stamps and modified with Photoshop Elements to this earthy taupe colour.  I added O Holy Night in a bold font, colour printed four to a sheet, trimmed them apart and then tore the edges to create this wonderful rustic layer for my card.  I simply added a length of black ribbon between the two elements and tied a short piece to it using a single knot to simulate a bow!!  Voila!  A quick and easy card!!  
I hope you will be inspired to make a few Christmas cards every month from now until the end of November!!  Have fun!!


Therese

Christmas card - Joy!

This card features some really nice decorative paper!!  To let the paper shine I added a simple colour printed image over the paper and a simple cardstock layer below it.  For a bit of bling I used a glitter gel pen on the greeting.
My inspiration for this card was one of a series of cards I found on Splitcoast Stampers.  The series was developed by Gisele for creating 16 cards using one piece of 12 x12 decorative paper.  The paper she used was perfectly suited for this "One sheet Wonder" technique.  You can check out all of the cards in the series on her blog, I  SPI.  Here is another set of cards she created!!
There are so many reasons for creating Christmas cards early - one of them is to get a chance to play with all that wonderful Christmas paper we have in our stashes and come up with cards that highlight them in the best possible way!!  Enjoy!

Therese

Christmas card - snowman

I found this card on Splitcoast Stampers that featured a snowman face and thought it was so effective that I thought I would see what I could come up with.  I created a frame and some masks to get the look I was going for using this digital image from Rusty Pickle - Silly Shells Digital Creations!!  I am pretty happy with the way it turned out!!  I laser printed the image, watercoloured it, added some glitter to the hat and nose and trimmed it leaving a bit of a white border.  I layered decorative paper onto my card front, added two large embossed rick rack die cuts, added my image layered onto orange using 3D foam tape and added a layered snowflake embellishment.
I really love this decorative paper and am very close to the end of my supply!!  I used it here, here and here!

Therese

Christmas card - Believe

When I was delivering kits from my last Christmas card class I had a friend ask for a set of kits, so this week I set about making up another set of Christmas cards for her!!
I love this image with the baby Jesus and Santa!!  I downloaded it from Melonheadz Illustrations along with the greeting which I modified to suit the image.  I laser printed the image and greeting, watercoloured both of them, layered them on red, stapled on two lengths of seam binding and glued the whole piece to a green card front.  Lots of wonderful digital images over at Nikki's blog so go and check it out!!
Great time to start on your Christmas cards!!  It really is wonderful to have them all made and ready to go come the end of November!!  If you need inspiration or direction you can check out the links to the Christmas challenge blogs I have on my blog - right hand side!!  My sister is running one this year - check it out here!
Therese

Steam punk cards

I made a couple of cards using the film strip art I created last week.  I challenged myself to create a digital collage with a bit of a steam punk feel to go with it.  I used images downloaded from Dover.  I am on their email list and they regularly send links to free samples from the many excellent books they publish.  Follow the link and sign up!!
I created clear backgrounds using Photoshop Elements for the man, the train, the airship and the border.  I layered them over two different floral backgrounds and colour printed them.  I trimmed my film strip to fit across the card, double knotted a piece of black vintage seam binding on the right and tied on a little metal star embellishment.
These are considered hybrid projects because they combine digital art with some hands on paper crafting!!  I am liking combining the two!!

Therese

Film strip art

Had a couple of days of crafty fun with my friend, Linda, last week.  We had lunch and a play date with a friend and made some great film strip art!!  We cut the film strip using  the TH die and black cardstock then stamped several small images from collage type stamps to place in behind with black Staz ON.   I coloured mine with Pan Pastels, trimmed the images to fit in the openings and then glued them into place.  Once I was finished I spritzed the whole thing with a glimmer mist which sealed my pastels as well as gave the whole thing some shimmer.  We had a great afternoon and I was blessed to spend it with such talented women.
Linda is taking an online card class so some time was spent working on cards.  Check out her blog and see the cool cards she made.
She is a great cook so the food is always wonderful when I am there.  So all it all it was a great visit!!
Be sure to make some time over the summer to get together with your friends - do something fun, eat some good food and make some memories!!

Therese

Embossed metal frame

I created this metallic frame for a friend who is relocating - it will be a good place to put a photo of her artsy friends!!
I started with a square wood frame and glued textured items to it - die cut chipboard letters, corrugated cardboard flowers, twine swirls, mesh tape and punchies.  I used double sided tape to attach all the elements except the mesh tape with is self adhesive.  Next, I covered all the front and the inside and outside edges with metal foil tape.  Yes, the kind you buy at the hardware store!!  I simply cut it into pieces and just started layering it on. Check out the photo below which I took as I was in the process of applying tape.   As you can see it doesn't matter what your pieces look like because they will all be covered and you will only see their shape and texture.

Once it was all covered I used a stylus to burnish around all the elements which added definition to the metal. I trimmed the metal tape to the back edge of the frame with an exacto knife and burnished the inside and outside edges with a wooden popsicle stick.  Once everything was burnished to my satisfaction I added yet more texture by scribing swirls, squiggly lines and dots along some of the tape edges.  Then, it was time to cover it all with black acrylic paint.  I wiped some of it off to reveal the texture I had created in the tape.  On hind sight, I might have left on more black to create a bit more contrast but I am happy with how it looks. I lightly sanded the letters to make sure they stood out and added a bit of silver and gold Perfect Pearls in a few areas.  I painted the back with black acrylic paint as well and sealed it front and back with a clear spray sealer so nothing would rub off.
Here are a few tutorials I used for inspiration:
http://beyondthefringecrafts.blogspot.ca/2012/06/industrial-metal-frame.html
http://beyondthefringecrafts.blogspot.ca/2012/06/metal-foil-tape-card.html
http://www.scrapbook.com/blogs/206/view/168127.html
I can see using this technique to make decorative paper for masculine cards and other projects where you want a bit of an industrial look!!

Therese

Card of Appreciation

I created this card for DH.  One of his choir members is moving on and he wanted a nice card to give her.  I went for subtly beautiful with lots of texture and muted colour.  I love the way it turned out!  I used a large pearly white envelope and created a white card that fit inside.  I layered on a piece of shimmer paper which I embossed at the top and bottom.  In between I scored a couple of lines right next to both embossed edges with my score tool and added a piece of white lace in between then sponged the edges just a bit before I glued it to the card front.  I laser printed this blossom image I downloaded from  Beccy's blog, watercoloured it, layered it onto a border punched layer, added some half pearls and attached it to the card front using 3D foam tape.  As a final touch I watercoloured a flower confetti, added a white brad in the center and glued it to the corner of the top layer.
She has been an invaluable part of the choir and will be missed!  We wish her well in her new pursuits!!

Therese

African themed card

On AFTCM, I joined an African themed card swap.  After a bit of brainstorming I came up with a sketch from which I created this card.  I applied strips of black and gold lame fabric around the edges of my card using double sided tape.  The fabric is bold and graphic - perfect of my African theme.  Inside this frame I created an gold embossed element which highlights the poem, Dawn of Tomorrow, by Chidi A Okoye about the arrival of a new day for Africa.  I used an embossing pen to sketch the elements and gold embossed them as I went - the border, the inside frame, the zigzag border and finally the heart.  I trimmed out the center of the heart and used bleach in a pointed nib to write the poem on the card front so it would show through the open heart.  I added clear plastic and some 3D foam tape to the back of the heart, added some gold micro beads on the card front and glued my heart element down encapsulating the beads creating a shaker element.  I added a piece of gros grain ribbon tied with a little gold coloured heart charm which adds some texture and a bit more dimension to my card.  There are several different colours of gold which provides richness and symbolizes the riches of Africa.
I enjoyed creating my own element for this card and playing with lines and gold embossing powder!!
Therese

Memory Glass pendant

On AFTCM, I signed up for a 1x3 glass pendant swap which I have been working off and on for the last few days.  Having never soldered before I did a bit of research to find some instructions and information.  Discovered that jewelery should be soldered with lead free solder  - a no brainer but I had not considered that when I signed up for the swap.  So as an alternative, I started searching for the Ranger Memory glass frames which hold the slides.  Was not able to find any locally so I needed to find a different way.  Someone on the list suggested that most solder is now lead free so I did a search on the Canadian Tire website and lo and behold they do have a variety of lead free solder so off I went and bought a roll.  I am a happy camper!!  I created a collage sheet using images from Graphics Fairy for the inside of my pendant - background paper, butterfly, script, flourish and a scroll border.  I delved deep into my Photoshop Element skills and developed some new ones on my way to making all these elements suitable for my collage.  I made a yellow butterfly from the blue one, gave them all transparent backgrounds and changed the colour of several of them.  I found lots of helpful information on line for doing what needed to be done but I did have to stretch my PSE muscles and follow the instructions CAREFULLY.  What a great resource the internet really is!!!
So my pendant is finished!! The front and back are similar which means you can wear with on either side and the charms flip over from back to front.  I cut a strip off of my laser printed collage sheet and cut two 1x3 pieces for the inside.  Glued them back to back with only a LITTLE dab of glue because moisture between the two glasses combined with the heat from the soldering causes steam which could ruin the look.  I applied copper foil tape (1/4") all the way around being sure to center the glass/collage sandwich and then burnished all the copper tape with a wood burnisher ( popsicle stick).  Then, I started soldering with DH's variable temperature soldering iron (600F) following directions I found on line.  Here is a link to a video on Stampington that was useful as well. Worked out pretty well.  Adding the jump ring was a real challenge.  I ended up adding solder to the wire and then creating the jump rings which worked better.  Not a bad job of soldering for my second soldering project.  I created a prototype with the other solder just to see if I could do it.  I sanded off any little bumps and nibs, cleaned the glass and polished up the whole thing.  This morning I added a little butterfly charm and a few beads with a jump ring, tied on a length of white seam binding and added an adjustable waxed cord.
I love joining swaps and challenging myself to learn new techniques!!

Therese

Casablanca Arch swap

On AFTCM,  I joined an arch swap with the theme of Casablanca.  I did some internet research and found a poet  - Abhallah Zrika - from Casablanca who has been jailed for his prose poetry and a quote where he expresses his wonder at the power of words.  In the process, I found out a lot about the region and their culture.  Beautiful architecture and tiled buildings!  I found a blog that talked about mosaics and how to create some simple patterns so I decided to create a tiled wall for my arch using one of his simple shapes.  I added an inner arch where I

added some arabic words and a hamsa  - a protection symbol that is used to attract the magic of life and repel evil - it is a lovely hand with a heart!!  I added a cage to protect the words and symbolize this poet's struggle with freedom and two white doves to symbolize peace and the pureness of following one's bliss.  I watercoloured all the squares blue - used extensively in their buildings - and added clear dimensional paint to make them look like tiles.  Once they were dry I added a clear sealer to the rest of the wall to make it look tiled.  As a final touch I added a short piece of white seam binding tied to the cage with a single knot and some blue half pearls to the bottom edge to add a bit of texture.
On the back I used the same hamsa symbol and this quote - " Words are a precious thing; everything can live in them." by Abdallah.   I used my "new to me" score tool (Thanks, Carol) to create a cross hatch pattern inside the inner arch and added my own quote in handwriting!!
A totally fun project which I am really happy with!!  It is off to my partner in today's mail.  


Therese

Paint technique swap card

On Just Cards we were challenged to try this paint technique and create a swap card with the resulting paper.  I love creating background papers so I joined the swap!!  For the technique you use dimensional paint to create a pattern on your substrate and while it is still wet you drip on several colours of acrylic paint and drag a credit cart through it.  As you can see I created swirls with my dimensional paint and used two different greens, a yellow and gold for the other colours.  Great look!!   You end up with globs of paint on the side of your paper after dragging your credit card over the whole thing so I used that paint on three more sheets of paper applying the paint using the credit card.  Creates a really cool look and lots of texture - more background paper.  Used some of those sheets for these cards.
For my card I printed a greeting and cactus image from Arthurs Clipart onto a laser transparency and trimmed it to leave an even border all the way around on my card front.  Trimmed my decorative paper to the same size, added a length of seam binding between the image and the greeting and attached it to the card using four small black brads.  I tied a small length of caramel seam binding to the green using a single knot to simulate a bow.
Swaps are fun because they often challenge you to try something you have never tried before.  This was a fun technique I will be using again.

Therese

White Wedding swap card

Joined a swap on Just Cards with "W" as the theme and decided to create a white wedding card.  The digital image I downloaded from Graphics Fairy - love the simplicity of this silhouette image.  I laser printed it onto a quarter sheet of white cardstock, embossed it with the Scroll embossing folder, trimmed it and mounted it to a white card front.  I used a sponging template I cut for previous cards and sponged on Gleams Pearl acrylic paint to create the oval shape and then highlighted her dress, headpiece and flowers with the same paint.  It is on its way to my swap partner!!
If you have yet to visit Graphics Fairy I would highly recommend her site!!  It is a wonderful online resource for a wide variety of  craft projects!!  Click the link to her Craft Blog and see what others are creating with her images!  You will be amazed - lots of very cool items - from cakes to home decor!!  


Therese

Cards, Cards, Cards - Christmas - a bit of bling

What's the best thing about making Christmas cards??  You can add bling as often as you like!!
Here is another design inspired by Splitcoast Stampers.  I have been seeing this embossing folder used in every format and with several different techniques for the center image so I decided to see if I could find a way to use this embossing folder - Cuttlebug Flourished Frame - for a card in this class.  I perused my digital images and found that these ones had almost the perfect proportions for the frame!!  These are by Melissa Jenkins and were downloaded from her blog when she was offering free images regularly.  They were perfect!!  I laser printed them to the right size, watercoloured them and used 3D foam tape to layer them over the embossed layer which I had already glued to my card front.  Just a few rhinestones glued to the flourishes finished off these cards!!  THRIFTY TIP:  Check out this link on my sister's blog that talks about using a fine tip bottle for applying glue.  The rhinestones we used today did not have a sticky back so I brought my little fine tip glue bottle - works so well.  My bottle used to be filled with dimensional fabric paint made by Tulip, I think.  I used the paint to make decorative paper and filled the cleaned out, empty bottle with white glue.  Just a little dab will do you and it dries clear so if the glue expands a bit beyond the edge of the rhinestone it just disappears once the glue is dry.  I am willing to bet that in your stash of crafty supplies you have a bottle with a fine tip which you could use for this purpose!  If you don't, no worries, there are several glues out there made specifically for paper crafting that have fine tips so check out your local craft or scrapbooking store.

Therese

Cards, Cards, Cards - Christmas - Folk art tree

I love this little folk art tree image!!  I found it on Laura`s blog called Pop N Stick.  She has several other cool digital images you can use for card making so check out her site!!  Here is a direct link to the tree.
I layered the tree to coloured cardstock, added a border punched strip and a  rectangle of decorative Christmas paper which I glued to a coordinating card front to make up this card.  I added a bit of ribbon to the decorative paper, sponged my eyelet edge, watercoloured my image and added this little greeting on my insert - Christmas is about what`s in your heart, not what`s under the tree. Wishing you a merry little Christmas!!
Making your own cards gives you so much flexibility!!  You can add your own little twists, use your favorite colour combinations and add meaningful greetings!!

Therese

Cards, Cards, Cards - Christmas - Vintage look

Christmas cards with a bit of a vintage feel!!  These cards feature images from a font called Christmas Cheer which I downloaded from the internet last week.  You can find it here.  I used the JOY, PEACE, NOEL and the winter scene with the house for these cards.  In Corel Draw, I sized the images to fit nicely in my largest oval Nestibilities, laser printed them eight to a page and cut them out individually.  I sponged the edges of my oval, my card and my button and watercoloured my image. I added a black label frame die cut (SX) embossed with a victorian embossing folder and placed some vintage seam binding in between.  These were layered onto a card front which was stamped using my Worn background stamp (SU) in brown.   I added a button and a bow which is a new technique I picked up this week off of Nancy Ward`s blog - Paper Friendly.  You can find the tutorial on Vicki Wizniuk`s blog - Wizards Hangout.  Basically, you take a length of ribbon, cross the ends, bring the center of the loop to the cross over, insert it into a loop of twine on the back of the button, tighten and tie off with a double knot.  Check out the tutorial and you will see how easy it is!!  I used a chipboard button which I die cut from a cereal box which was just the right colour to go with this card and used black cotton crochet thread to tie off the bow.  We used glue dots to attach this embellishment to our card fronts.
It is fun to create Christmas cards in non traditional colours though this one is starting to be one of my favorite combinations.  Check out these cards and these ones we made last year.  Here`s a few more and some more made a few years ago.
Don`t be afraid to think outside the box when it comes to colour combinations and images for Christmas cards.  One of the girls at class today said she would probably use these bird images for making a few Christmas cards.  I think they would make wonderful Christmas cards!!

Therese

Cards, Cards, Cards - Christmas - doilies

Christmas cards!!  We met this morning to create Christmas cards and get a head start on that process.  It always feels great to have your cards made and ready to go when December rolls around.
I have been loving the lovely cards I have seen on Splitcoast Stampers that feature the dainty Doily stamp from SU and really wanted to make a card with that lacy look!!  For this large class it means a lot of thermal embossing to get that look so I decided to see if I could find a digital solution.  Hooray!  I found one.  On the Avant Garde Collection CD (SU) there is a paper collection called Flirtatious and one of the papers is a large doily!!  I brought the image into Photo Shop Elements and replaced all of the white areas with transparent in a few clicks of the mouse following instructions from the internet.  I cannot seem to locate the exact tutorial I used but there are lots of different ones on how to do this.  I was also able to change the colour of the doily in PSE using the paint bucket so I created a white and red version to use on these Christmas cards!!    I imported the images into Corel Draw, duplicated them so I had four doilies and then  laid them out so they would each be off the page in each corner of a 8.5 x11 page.  I created a box of colour beneath the two white doilies to show them off nicely and added greetings.  Once I had them sized and positioned by eye I printed one page to see which circle punch I would need to create the centers.  I had to resize the doilies a bit so that the 1 3/8" punchies would leave a nice scalloped edge visible.  I printed these on white cardstock using a colour laser, cut them apart and trimmed them to 4" x 5.25".  I layered a coordinating circle punchie in the center of the doily, added a fiber snowflake and used a brad to attach them all together.  This element was glued to a coordinating card front.  I embellished the front with glitter glue to add just a bit of sparkle!!  I used iridescent for mine but some girls at class today used silver on the blue one and red on the red one and that really looked very nice!!  I expect a spritz of shimmer spray would be really great too!!
So I encourage you to find your newest Christmas stamp, a sketch you like,dig out some paper and get creative!!  If you prefer digital stamps check out the next few post for links to some I used for this class.

Therese

Cardmaking - June - Feathered Friends

I love these bird images!!  They are available from The Graphics Fairy.  She has a wide variety of images, backgrounds and line art - simply a great resource for digital images.
I used four different images and added a quote to each one as well as a coloured border.  I have been playing around a bit more with combining digital elements so this was a fun experiement.  In the end, it made for a quick and easy card.  I printed the image on white cardstock and we simply embossed the lower half, added a ribbon and glued the whole thing to the front of a coordinating card!!  Too easy!!   To easy to add a greeting as well with a little piece of 3D foam tape.
I will be passing on the cardmaking baton to a friend of mine who will be taking over the Wednesday night classes in September.  She is excited to be on the other side of the table and has been brainstorming and designing kits for the fall.  I look forward to catching up with the group during the Christmas card classes on the first two weekend of November!!
I have so enjoyed this group and the opportunity to share cardmaking!!  I will miss the friendships I have built, but I do need to change my focus.  My craft room is part of the unfinished basement and the finishing process has begun so I need to be cleaning up, sorting and packing up my "stuff" so the job and be finished within a reasonable timeline.
I will still be around and posting to my blog regularly!!

Therese

Cardmaking - June - Transparency

I was playing around with a paint technique for a challenge and ended up making up several sheets in these two colours - pink/red and yellow/green.  I have seen many videos and tutorials where they use old credit card to apply paint but it is the first time I have tried it.  It works really well. If you been thinking you would like to try it I encourage you to give it a go!!
I printed Dover images on transparency to layer over my decorative paper and attached them to the card front using brads.  I added three little strips of embossed coordinating cardstock to the right hand side.  On the first one I used a corner rounder and am not terribly happy with the look - I think because the top one ended up round and looks like it doesn't go with the others.  So on my second one I decided to use a different technique and I am happier with that.  I also embossed the card front which helps add texure!!  The little felt flower was added last using a glue dot.
You can sign up with Dover to get emails regularly which highlight their collections and offer free samples.  Well, worth it for the free images they offer!!  Go here to sign up!!

Therese

Cardmaking - June - Fun Greetings

It is always fun to change things up, so for this card I combined the image and the greeting.  All of the images were downloaded from CLKER and I added some fun greetings using an appropriate font.  Some of the other ones were: "Heard you needed a pick up" with a little truck, "Best Fishes" with a cute little fish, "Be Happy" with a little bee, "Butterfly Wishes" with a butterfly, "Smile" with a camera, "You're Purrr- fect" with a cute kitten and "You're so sweet" with a little cupcake!
I cut the circle elements and the scalloped layers with my Nestibilities.  Started by adding a layer of decorative paper to the card front and a length of seam binding or ribbon.  Tied on a short piece with a single knot to simulate a bow and added my main layered element over it using 3D foam tape.
It is always good to have a few greeting cards on hand that you can send to friends and family for just for fun!!  These fit the bill perfectly!!

Therese

Cardmaking - June - Vintage

Our last Wednesday cardmaking session before the summer break!!  It is hot here!!  We were glad to have our cards made early and be off to cooler places!!
For our first card we made one with a bit of a vintage look!!  After not finding enough of what I needed for these card kits in my decorative paper bucket I decided to make up what I needed.  I started with brown paper that came in a box a few weeks ago wrapped around something "important".  I wrinkled it, opened it up and wrinkled it again and then started adding different colours of brown acrylic paint washes and then wrinkled it again.  Once it was dry I ran a dark brown ink pad over the wrinkles to highlight the texture.  Added a lighter colour to soften the dark one and I was happy with that.
I added a piece of my new decorative paper to my card front overlapping the section I had embossed.  I added a piece of paper lace - from way deep in my stash - being sure to only dab my glue stick on it so the holes would remain open.  I layered my collage element over a layer of kraft and mounted it over the end of the ribbon using 3D foam tape.  For a little more texture I added a small flower (TH) cut from corrugated cardboard and adhered it to the card front using a brad to which I had added a gold sequin - just a bit of bling!!   The images were all different and were cut from a 12 x12 page of scrapbooking paper.  I trimmed each image using my Fiskars stamp edger scissors.  Just the look I was wanting.

Therese

Father's Day card

Made this card for my DH for Father's Day.  I just received some grunge board elements as a prize from one of my groups and thought that the coffee cup one would work so popped out the pieces and painted them up with brown, tan and gold acrylic paint.  Once they were dry I reassembled the pieces and highlighted the cup with some clear dimensional paint.  I love the way it worked out.  The music background has been downloaded from Free Vintage Digital Stamps and colour printed.  I added some black twill and caramel seam binding and mounted my layered element over them using 3D foam tape.  Add a layered greeting with a bit of bling!!
He loves music and coffee so I thought this worked pretty well for him!!

Therese

Thank you cards

Every new mother needs a few cards to acknowledge the blessings she receives from those around her when she bring a new baby into the world.  Oh, joy!!
I made these as a gift for my cousin and his partner who just had a baby in May.  Handmade cards are an appropriate gift for most every occasion.
I used plaid decorative paper on the top of these cards and overlapped the bottom edge with a rectangle of brown that has been border punched on both sides with the SU scallop border punch.  I added a blue ribbon and a star die cut attached with a white button brad.  I also added dots of white in each scallop with a white gel pen.  These fit in #8 envelopes.

Therese

Baby Card

 A new baby was born into the family in May and I am just getting to sending a card and gift.
This card was part of the All Occasion Class I taught earlier this month and I used green cardstock so it could be customized for a boy or a girl by just colouring the image appropriately.  I love this cute little buggy digital image which I downloaded from WP clipart.  I watercoloured the laser printed image, distressed the green layer and added it over the white seambinding using 3D foam tape.  I used the Swiss Dot embossing folder on the green background and mounted everything to a white card front.  The little colour printed greeting is punched on both ends with the SU eyelet border punch.
Babies are such a great way of starting people!!  Always worth celebrating a new addition!!

Therese

More Panel Thank you cards!!

I made up more of these single layer panel cards with some of the digital papers available on the Avant Garde Collection CD from Stampin UP!! Love those graphic designs and the great colours!!  For some, I used the designs as the focal point and simply sized them in Corel Draw so I could just print and cut.  The center ones feature a paper with an all over design so I created coloured boxes to accent my text.  I can see combining several different papers in my next batch which brings me closer to the look of handmade cards!!  Maybe I will even add ribbons and buttons!!  Check out this link to see the other ones I created a while back.
Check out the collections in the new SU catalogue!!  The designs on the CDs can be used in other graphics programs such Corel Draw so I am looking forward to acquiring a few more collections!!

Therese

Another one!

Another pop twirl card!!  A completely different theme and I was able to get my twirling element to be hidden inside the card!!
The music background is from Free Vintage Digistamps which I colour printed and glued to my card front.  The other two digital images I found at Pure Clipart and at Clipart Monster Club.  I added DANCE using embellished letters.  I created these typewriter letters years ago which I laser printed and punched out using my 1/2" punch.  I watercoloured them and added Dimensional Magic to finish them off nicely. Once dry I used glue dots to attach them to my card front.  Added my coloured image with 3D foam tape which overlaps my white seam binding that features a simulated bow.   To simulate a bow, simply tie a short piece of seam binding with a single knot to the long piece that has been attached to the inside of the card.  It can easily be adjusted by sliding along the ribbon.

On the inside I added a bit of sponging and stamping and some handwritten words - "like no one is watching".  I cut out the little ballerina and sewed her a skirt using blue and shimmery white tulle!! I love how she turned out.  You can see a close up photo of her below.  I had to be careful not to trim her too close so I would have enough room to add my trimmed glue dots which attach her to the bamboo stick.  She is also watercoloured. I added tied ribbons to the ends of the stick to keep it from slipping through. She twirls beautifully!!
I made my pop ups a little less wide to accommodate the height of my ballerina and  if I were to create another one of these I would stick with the 1" ones as they are more sturdy and make a my card taller to fit all the elements.

I would highly recommend trying out this fun card!!  I expect it will take a little more postage to send but I think totally worth it for the fun and movement it provides.  So many possibilities!!

So now to decide which one to send to my swap partner!!

Therese

Pop up Twirl card

Joined a card swap where I had to create a pop up twirl card.  Unfortunately the swap was cancelled so I contacted one of the girls who had signed up and we are swapping One for One!!
You can check out the tutorial on Splitcoast Stampers.  It is not really complicated but does require precise cutting to get the mechanics to work.  It is really fun because the inside element pops and twirls!!  Check out the video at the bottom of the tutorial to see how cool it looks!!
You do need to use sturdy cardstock and the two full layers just  like the tutorial indicates because there is a fair amount of torque on the cardstock when the twirling is happening!!  Be sure to glue them together well.   I used strips of paper instead of buttons on the bamboo stick - just made a paper bead on the stick.  Saw this idea somewhere else on the internet and thought it would be a better option for a card that is going to be mailed.  My twirling element stuck out of my card so I added two border punched strips which worked out really well but it does
mean I will  have to mail it in a larger envelope.
I embossed the whole card front.  I have a  piece of cutting pad for my Big Shot which is the result of having broken a plate, which I use for embossing only parts of an embossing folder.  In this case, I embossed three quarters of the front using the embossing folder and then moved it over aligning the dots so I could emboss the remaining quarter.  Had I used a full plate one row of dots would have been squished by the flat edge of the embossing folder.  Instead I used my partial cutting plate and placed it on the embossing folder so it did not impact the edge of the embossing folder.  Magically, no flattened spots in the middle of my embossed card front.  So hang on to the pieces of your next broken cutting plate for using this way.  I added an embossed TH Ornmental Label die cut with white seambinding and a simulated bow.  I created the sunflower using this template and triangles created by cutting  1 3/4" squares diagonally.  I curled the ends with my scissors for a bit of dimension and added a bit of watercolour in the center.  The center is a brown scalloped circle (NS) embossed with dots and features a little lady bug I created using a red 1/2" punchie for the body and a black 1/4" black punchie for the head.  I added the spots with a black Sharpie marker and added clear dimensional paint for dimension and shine.  I hand cut the stem and leaves and watercoloured them a bit after I embossed them.
I am making one more of these to see if I can keep my twirling element inside the card!!

Therese

50th Anniversary Card

For a couple who are celebrating a milestone - 50 years of marriage!!  I chose to use gold coloured cardstock instead of a shiny gold finish to keep the card more subtle.  I colour printed the greeting on a light gold cardstock in a dark gold colour using a font called NOEL.  Love this font!!  It has such a handwritten feeling.  I added an embossed element above, which is two strips of the same cardstock punched with my eyelet border punch (SU), embossed with a flourish embossing folder (SX) and then scored with a line in between with a scoring tool (MS).  I added a bit of contrasting ink to highlight the texture before gluing it to the card front.  Added vintage seambinding over the joint and two hearts cut from a very light gold and a darker gold with the colours transposed - a great metaphor for marriage.  I tied a short piece of seambinding to the left of the hearts with a single knot to simulate bow.
Fifty years of marriage was rather rare when I was a child but is a more common event these days but I do not think that in any way diminishes the value of the accomplishment which is so worth celebrating!!

Therese

Cardmaking - All Occasions - wedding & more

These were the last set of cards we made this morning!!  I always have a quick and easy card for the last one because everyone is getting antsy and ready to get on with their day.
I chose four images from WP Clipart - a wedding cake, a fern, a baby carriage and a bouquet of tulips which created cards appropriate for a wedding or anniversary, a masculine birthday or a sympathy card, the birth of a child and could be customized by colouring the carriage either blue or pink and a get well or spring birthday card.  An embossed background, a seambinding with a simulated bow and a layered image.  I did not add colour to the wedding cake leaving it until I actually use the card so I can customize it to the recipient.  I may consider simply adding some sparkle using a clear Sakura StarDust gel pen instead of adding any colour.
I do so enjoying sharing my enthusiasm for cardmaking with like minded people!!  It blesses so many people, me as I create the card kits and teach the class, the participants as they create the cards and add a bit of themselves as they do and the recipients of these lovely creations.  If the card is resused, it is a blessing yet one more time.  Thrifty Tip:  Use plain paper inserts on the inside of your cards and simply glue them with one little strip of glue on the inside front near the fold.  This allows the insert you have written on to be removed and replaced with a new one and the card reused!!  Here is a tutorial on making envelopes so you can send that refurbished card on its way!!

Therese

Cardmaking - All Occasion cards - Faux Pinwheel

These were fun to do!!  I regularly check out Splitcoast Stampers for cardmaking inspiration.  It is such a wonderful resource for any cardmaker - lots of eye candy!!   You can find a tutorial here and a video here!
I created a template (see below) to simplify creating the pinwheel by providing a center and indicating where all the corners needed to be.   I used 1.25" squares and the pinwheel is about 3.5" across.  Works best with contrasting coordinating papers - I used decorative paper for one set of squares and cardstock for the other.  The background was embossed and I added a layered laser printed greeting.  The layered greeting combines punchies from the SU window punch and their modern label punch.
It was fun to dig through my scraps of decorative paper and come up with some coordinating cardstock for the other set of squares and the background.  I mounted the pinwheel using 3D foam tape and then added the flower punchie in the middle which helps give this element some dimension.
One of the girls commented on how the pinwheel looks very much like a quilt design and she had a friend that would most appreciate one of these cards.  That is one of the benefits of making cards - you can make them to suit those who will be receiving them.
Give this a try!  It is easier than it looks!!  Consider doing one with scraps first to help you understand the process of placing the squares and gluing them to each other.

Therese

Cardmaking - All Occasion - cake & gifts

Another versatile sketch!!  I used digital images created my Michelle Perkett for this set of cards.  She has a variety of images and sentiments as well as an Etsy shop so check out her site!!
The decorative paper on this card is layered with coordinating cardstock.
Thrifty Tip:  use two small rectangles behind your decorative paper instead of a full piece. It will allow you to use smaller pieces (check your scrap bucket) as well as providing less weight to your card.
I embossed the top portion but today some embossed the whole front, some debossed the area instead of embossing and others chose to emboss the bottom half instead of the top - so many options.  The digital image is laser printed, coloured, layered and added to the card front using 3D foam tape.  It was fun to use different embossing folders for each card.  I also added some paper piercing below the decorative paper - adds a bit of texture.
Thrifty Tip : I use a push pin, a strip of plastic canvas and an old mouse pad as my paper piercing tools - works really well for creating evenly spaced holes.
These fun images would certainly be great embellished with some glitter so I may consider adding some before I send them on their way!!

Therese

Cardmaking - All Occasion - bon voyage!

Another great cardmaking class this morning!!  We were making All Occasion Cards this time so I ensured that each card was a bit different by using flexible sketches and a wide variety of colours!!  It is always fun to see the cards once the kits have been assembled at class as each person adds their own flair and creativity to the process.
I love the flexibility of this sketch!  I included anywhere from four to eight strips of cardstock to create the background and then encouraged the participants to consider different placements for their ribbon and greeting and they could even have created a portrait card with these elements.
The little strips were embossed and then glued to the background layer which was then adhered to the card front.  Once the ribbon placement was decided the ends were glued to the inside front of the card using double sided tape.  The greeting was coloured and layered then adhered over the ribbon using 3D foam tape.  The little cardstock diamonds provide a nice little embellishment on these cards!!
I love these little digital greetings which all include little images as well!!  They are from Melohheadz Illustratiing.  She is a prolific artist and has a wide variety of images - check out her site!!  Use the labels on the right hand side to help you find what you are looking for!!  Here are direct links to  Bon Voyage, Giving Thanks, HB Cupcake, Friendship is  images!!
I am finding myself using a lot of digital images lately.  They are always perfectly "stamped" cause they are printed, can be sized to fit your project, take no room to store, can be modified to any colour and if you save them carefully - in a folder with the name of the site in it - you can always find them!!  Lots of benefits!!

Therese

Collage Mandalas

I created these for a swap on AFTCM - Mandalas.  I did a little internet research to see what others have created for mandalas and found lots of digital tutorials for creating them which were pretty interesting. But, I was wanting something that involved a more hands on technique so decided to search for collage mandalas.  I found several that were done in large scale on canvases so I just adapted the process for these 4x4 chunky book pages.  I did create a layout in Corel Draw before I started with  paper to establish what size each layer needed to be and then raided my collage bucket and found some papers that coordinated.  I started with a 4" x4" square, added a 3" circle with 12 3/4" punchies layered below the edge, 2 1/8" square, a 1 7/8" square, 1 1/4" square, four triangles and a gold 3/4" punch for the centers.  I added black lines to the green-blue one and white lines to the pink-yellow one after I glued all the layers into place.   I am really happy with the way these two worked out.  It is a fun process that has no rules so you can just create as you wish and really allow your inner guidance system to move you along.

Therese

Little fabric quilts

Started this quilting project last week.  I am wanting to make some fabric journal covers like Teesha Moore has created.  You can check out the tutorial  here!  I have finished the edges on these three. I think I will put together a few more with different fabrics. It has been a very long time since I did hand sewing but I have really enjoyed doing these. I am looking forward to using up some fabric scraps and these little quilts are so easy to take along to be worked up in the car or anywhere you might be waiting for a bit of time.  Once I have a bit of a selection I will start doing the inner quilting.  I love the embellishing she does with beads and so on once she has created the fabric journal covers.
I have used a mixture of fabrics - cotton, silky polyester, etc.  I used craft thread on some and embroidery thread on others.  She recommended the pearl thread which I think might be worth investing in.  I wanted to try it out with what I had just to see what sorts of results I was able to achieve.  So, now that I have started I hope to keep a little stack of blanks ready to go and work on these regularly - a bit of creativity every day!!

Therese