I am in need of masculine cards again!! It seems that this year I cannot keep any masculine cards in my card stash so I decided yesterday to make a bunch of them.
I started with paper that was wrapped around an internet purchase that arrived from Hong Kong!! Wonderful green paper!!
I scrunched it, rubbed it with a green ink pad, stamped some brown leaves and script in turquoise! Ironed it a little to flatten it and cut it into 4" x 5.25" pieces for my cards!! I dug out a variety of masculine images from my image stash, some coordinating card fronts, my containers of cardstock scraps, my bucket of extra greetings and some vintage seam binding!!
I picked a card, layered on my new decorative paper and started adding elements - an image, a greeting and some ribbon layering as I went along. By the end of the day ( I did have a few interruptions and did eat) I had created 9 cards!!
In the photo on the right I have tried a technique that I first saw here on Charmaine's blog. You create the look of a bow by inserting folded ribbon in a loop that has been inserted into a hole. Very cool idea!! Because I was making masculine cards I decided to just put lengths of ribbon through the loop instead of folded ones. I love the look!! Really easy and worked really well with the soft bodied seam binding. I punched a 3/16" hole in my greeting, slipped a loop from the long seam binding through it from the back and inserted the two lengths through it and pulled it taut. You have to be careful not to pull too hard to keep the loop on top.
A very enjoyable day of creating!! I am happy to have been so productive and that I have a good supply of masculine cards in my card stash!!
It is surely the fastest any piece of paper has been reused in my house!! I usually need to "sit" with supplies before I use them. On the other hand, quite often, paper gets put away and doesn't see the light of day again for a few months or years!!
So challenge yourself to dig up something you have been saving and create something today!!
Therese
Saturday, April 21, 2012
Wednesday, April 18, 2012
Cardmaking - April - Artsy flowers
This was so much fun to do! I laser printed the Papier Salat images onto white cardstock and added some swipes of liquid watercolour using a foam brush!! I love the bold bright look of these little works of art so decided to keep the design simple - a double knotted piece of vintage seam binding and a brushed silver paper layer nicely framed on black card fronts!!
Love these quick and easy cards!!
Therese
Love these quick and easy cards!!
Therese
Labels:
A2 cards,
Cardmaking,
cards,
digital stamp,
seam binding,
watercolour
Cardmaking - April - woven accent
In the spirit of making the most of the supplies I have on hand and in celebration of Earth Day I decided to use the stash of paper strips I have accumulated as I trim paper for other projects. I love how these worked out, though, I really prefer the randomness of the red one. The one on the left used cut offs from these cards and I am really happy how bright the colours were next to the yellow cardstock but after I glued down the piece and added the image I thought it was just a little too square and even but taking it apart would have been problematic because these are made using wax crayons. The butterfly image I downloaded from CLKER and the heart is from Torico, I laser printed them and use 1 3/4" punch to cut them out. Used a scalloped Nestibilities circle die to cut the layer. The little patch of woven strips works really well over the embossed card fronts.
Therese
Therese
Cardmaking - April - Birdies!!
Am so loving the birdie cards that are everywhere so when I saw this little guy on The Graphics Fairy blog I nabbed him right away!! I laid out three of them in my layout program (Corel Draw) and added a bit of length to the branch in PSE so that they would all look like they were talking to each other and added the little birdie saying as well. I laser printed the image, watercoloured it, added a ribbon, layered it onto brown and then glued the whole element to my embossed card front.
Great for spring birthdays!!
Therese
Great for spring birthdays!!
Therese
Labels:
A2 cards,
Cardmaking,
cards,
digital stamp,
embossing,
embossing folder,
laser printing,
ribbon,
watercolour
Cardmaking - April - earth friendly flowers
Guess what these flowers are made of??? Plastic bags!! So cool! I die cut them from plastic shopping bags using the Tattered Flowers die (TH)!! The white one is from SU and the pink ones I am not sure as there was no advertising on them. I found several different colours in my stash - lime green, purple, gold - all bags I received from my local scrap booking store! Got the idea from my sister and you can check out her flowers here on her blog.
I layered several plastic flowers, added a cardstock mini flower and punchie and held them all together using a brad. The leaf was die cut from cardstock using the Tattered Leaves die and embossed. The edge of the top layer was cut with a Border die (TH) and then embossed. I added a strip of decorative paper below the die cut edge which finishes the card off very nicely!!
Love this simple design!! Would make a wonderful Mother's Day card!!
Therese
Labels:
A2 cards,
border die,
brads,
Cardmaking,
cards,
decorative paper,
die cuts,
embossing,
embossing folder,
punchies,
Tim Holtz (TH)
French Vintage swap cards
I created these cards for a "French Vintage with a fancy fold' swap on AFTCM. Have been wanting to try this fold for a while so just decided I would try it for this swap. I downloaded all the images from The Graphics Fairy, brought them into my layout program (Corel Draw) and laid them out to create all the pieces I was going to need to make the cards. I printed one in black and white and the other in colour. I really like both of them!! I used one of them for my card exchange and sent the other on its way to my swap partner!!
I am hoping to be able to use this fold again. It was not difficult to work out. I cut my cardstock to 4.25"x 11" and folded it in half. Then I cut 3" x 4.25" off the one side and used it as the front layer. Too easy!!
I will try using coordinating decorative paper next time around!!
Therese
I am hoping to be able to use this fold again. It was not difficult to work out. I cut my cardstock to 4.25"x 11" and folded it in half. Then I cut 3" x 4.25" off the one side and used it as the front layer. Too easy!!
I will try using coordinating decorative paper next time around!!
Therese
Labels:
A2 cards,
cards,
collage,
colour printed decorative paper,
digital stamp,
fabric lace,
swap
Thursday, March 22, 2012
Cardmaking - March - embossed handmade paper
These cards were our last of the night and quick & easy!! We layered some decorative paper to a coordinating card front and glued on our little sheets of embossed handmade paper. Added a layered greeting and some ribbon with staples!! The greeting is a combination of the SU window punch and the modern label punch - they layer very nicely. I have a reusable Corel Draw file I use to create whatever greetings I need that have the correct format for punching with the window punch which is a great time saver when I have kits to prepare!!
It was great to see some new people last night and some I haven't seen in a while!! A great group!!
Spring has sprung here - daffodils are 8" high already!!! Will probably be blooming within the week!!
Therese
It was great to see some new people last night and some I haven't seen in a while!! A great group!!
Spring has sprung here - daffodils are 8" high already!!! Will probably be blooming within the week!!
Therese
Cardmaking - March - embedded shapes
This card uses the lattice embossing folder (SU) to embed shapes into a piece of cardstock!! What a great technique!! The embossed cardstock has a quilted look and the punchies look like they are part of the paper!! You could probably use any of the other very textured embossing folders to created this same look.
I first used a border punch on the bottom of my layer and then simply glued my punched shapes to the cardstock layer and ran it through my Big Kick using the embossing folder! Voila!! We added a piece of ribbon with a short piece tied to it, to this layer, glued that to our coordinating card front and then added our round embellishment/greeting using 3D foam tape!!
This is another really fun technique!! Save your extra punchies in one place and pretty soon you will have enough to do this technique!! Or punch out several shapes from your scraps of coloured cardstock before filing it in the "round file" or in my case into my bucket for papermaking!!
Therese
I first used a border punch on the bottom of my layer and then simply glued my punched shapes to the cardstock layer and ran it through my Big Kick using the embossing folder! Voila!! We added a piece of ribbon with a short piece tied to it, to this layer, glued that to our coordinating card front and then added our round embellishment/greeting using 3D foam tape!!
This is another really fun technique!! Save your extra punchies in one place and pretty soon you will have enough to do this technique!! Or punch out several shapes from your scraps of coloured cardstock before filing it in the "round file" or in my case into my bucket for papermaking!!
Therese
Cardmaking - March - restructured paper
For our second card last night we used restructured paper for the background!! I love the look of this paper!!
I also provided a silver foil frame die cut (SX) which, as you can see in the photo, could be used in several different ways. I sanded the one on the right before I embossed it which gives it a more subtle look. We punched our back layer for the greeting from the middle of the large oval (NS) layer before we added our coloured image. These are digital images from Melonheadz Illustrations. They are cute and whimsical yet have a lot of graphic quality to them. The ribbon is just a bit off white so it would coordinate with the restructured paper. To get the right colour I dyed white ribbon using tumeric - yes, the spice!! Very cool, and gave me just the yellowy off white colour I needed. Assembled all the elements on a black card front. The card on the right is for my son who just got a new job!!!
Therese
I also provided a silver foil frame die cut (SX) which, as you can see in the photo, could be used in several different ways. I sanded the one on the right before I embossed it which gives it a more subtle look. We punched our back layer for the greeting from the middle of the large oval (NS) layer before we added our coloured image. These are digital images from Melonheadz Illustrations. They are cute and whimsical yet have a lot of graphic quality to them. The ribbon is just a bit off white so it would coordinate with the restructured paper. To get the right colour I dyed white ribbon using tumeric - yes, the spice!! Very cool, and gave me just the yellowy off white colour I needed. Assembled all the elements on a black card front. The card on the right is for my son who just got a new job!!!
Therese
Cardmaking - March - Ewe cards
This is the first card we made at cardmaking last night. We had two young cardmakers join us so it was fun to start with a cute one!!
The Ewe was created using a scallop circle punchie (SU) which I embossed with a swirly embossing folder. You trim a five petal punchie (SU) leaving three petals together to create the head and ears and the two others are used for the legs! Pretty cool!! I searched the internet for ewe punchie tutorials and found quite a few different ways of making them using different punches. Here is a tutorial for this one This ewe is created by adding eyes to the middle section - head - using white gel pens. Glued this piece to the front of the scallop and the legs to the back. The background is created using three different embossed layers - blue for the sky, one green for the tree line and another for the grass. One of the girls at class used the thin darker strip below the sky and it creates the look of a meadow with a distant tree line instead. I love teaching because of what I learn from my students!!
The greeting is laser printed, trimmed with decorative scissors before being layered onto black and adhered to the card front with 3D foam tape. I also used 3D foam tape to adhere the ewe!! You can see on one of them I added three diamonds which just gives the card a bit more punch. I think I will add them to the other one!! I found several "ewe" sayings online and you can obviously substitute "ewe" for "you" in all the regular greetings!!
Therese
The Ewe was created using a scallop circle punchie (SU) which I embossed with a swirly embossing folder. You trim a five petal punchie (SU) leaving three petals together to create the head and ears and the two others are used for the legs! Pretty cool!! I searched the internet for ewe punchie tutorials and found quite a few different ways of making them using different punches. Here is a tutorial for this one This ewe is created by adding eyes to the middle section - head - using white gel pens. Glued this piece to the front of the scallop and the legs to the back. The background is created using three different embossed layers - blue for the sky, one green for the tree line and another for the grass. One of the girls at class used the thin darker strip below the sky and it creates the look of a meadow with a distant tree line instead. I love teaching because of what I learn from my students!!
The greeting is laser printed, trimmed with decorative scissors before being layered onto black and adhered to the card front with 3D foam tape. I also used 3D foam tape to adhere the ewe!! You can see on one of them I added three diamonds which just gives the card a bit more punch. I think I will add them to the other one!! I found several "ewe" sayings online and you can obviously substitute "ewe" for "you" in all the regular greetings!!
Therese
Masked tree swap card
Used the SU scallop border punch on the bottom and pierced each scallop, layered it onto teal and added the vintage seam binding tying the scrap to simulate a bow. Layered this element to a black card!!
Happy with it!!
Therese
Labels:
A2 cards,
border punch,
cards,
laser printing,
masking,
piercing,
scallop edging,
seam binding,
sponging
Sunday, March 18, 2012
Birth Announcement
The design of this announcement is a cooperative effort between my daughter, my sister and myself. My daughter wanted a large letter on the front of the announcement and because of a short timeline I had to consider other options besides cutting them all out by hand. We had hoped to use my sister's Cricuit to cut them but, unfortunately, because we could not adjust the aspect ratio of the letters we did not have a font that would properly fit the front of an A2 sized card. During a brainstorming session with my sister she suggested using transparencies which is the route I chose and I am very happy with the way everything worked out.
Once I had worked out the lay out I hoped that my daughter could provide a photo with the elements - baby on the right and something cute on the left that would be hidden below the stem of the L and only revealed when the announcement was opened. Yeah! She did it!! Apparently, with the camera in one hand and the puppet in the other!! I did digitally scale down the puppet and moved it over and down a bit so it would be completely hidden behind the L and was fortunate that the background was very forgiving!! He is a cutie!!
So after digitally modifying the photo I added his name and stats below it - covered by the bottom part of the L in the scan. Printed them all on heavy weight laser copy paper and trimmed them. I also printed a backer with a welcome from the rest of the family - Mom and Dad and his brother and sister!! The large L was adjusted to fit perfectly on the front and filled with a "marbled paper" background which I found in Corel Draw then colour laser printed on laser transparencies. I used brads to assemble the pieces as I did not want any glue to show. I put the brads in from the back and covered the tangs on the inside with diecut embossed buttons to which I had tied some white cording. I also added a large one to the front for a bit of texture!!
So we welcome another member to the family. We have grown by one every year for the last five years!! We are grateful for the new little people that we will watch grow and for their parents who have chosen to bring them into the world. It is the circle of life!!
Therese
Thursday, March 15, 2012
Glittered Christmas cards
I created Christmas cards with the spare trees I glittered when I was creating my calendar!!
I layered the glittered trees over some gold foiled paper, added a ripped embossed paper snowbank and a gold embossed layered greeting. A quick and easy cards and my first Christmas cards this year!!
I had Christmas cards left over from last year so I have been less motivated to get started really early this year.
I am happy to have been able to create some cards with the bits I had left over from my class. It is always harder to use up bits later on when the vision for them has been replaced with something else!!
Therese
I layered the glittered trees over some gold foiled paper, added a ripped embossed paper snowbank and a gold embossed layered greeting. A quick and easy cards and my first Christmas cards this year!!
I had Christmas cards left over from last year so I have been less motivated to get started really early this year.
I am happy to have been able to create some cards with the bits I had left over from my class. It is always harder to use up bits later on when the vision for them has been replaced with something else!!
Therese
Anniversary cards
Made up a few anniversary cards with hearts I glittered when I was creating my calendar pages. They also feature some of the restructured paper I created a few weeks ago. I love the look of this paper!!
I combined red and white heart ribbon with strip of black border punched (SU) cardstock and layered it over the restructured paper to which I had added a stitched border using a fine tip permanent marker. I used a white gel pen to embellish the scallops. Attached the glittered heart using 3D foam tape.
I really love the look of these cards!!
Therese
I combined red and white heart ribbon with strip of black border punched (SU) cardstock and layered it over the restructured paper to which I had added a stitched border using a fine tip permanent marker. I used a white gel pen to embellish the scallops. Attached the glittered heart using 3D foam tape.
I really love the look of these cards!!
Therese
Labels:
A2 cards,
border punch,
cards,
faux stitching,
gel pen,
glitter,
hearts,
restructured paper,
ribbon
Wedding invitations
This is the final design of wedding invitations I created for a couple who are getting married in just less than a month!! I have been waiting until the package was received and they were happy with their little bundle before I posted them here.
I love the simple elegance of this design!
I used a flourish embossing folder to do both sides of the white gate fold invitation and embellished the front with three hearts (SZ - tipsy heart) - two embossed and one silver foil!! The inside features a single laser printed panel with their wording.
These are the samples I provided for them after they had been through the links to cards on my blog that I thought might be appropriate for use as wedding invitations. They simply substituted the silver foil for the red!!
I wish them blessings as they start a life together and hope they will always celebrate the good of being together!!
Therese
I love the simple elegance of this design!
I used a flourish embossing folder to do both sides of the white gate fold invitation and embellished the front with three hearts (SZ - tipsy heart) - two embossed and one silver foil!! The inside features a single laser printed panel with their wording.
These are the samples I provided for them after they had been through the links to cards on my blog that I thought might be appropriate for use as wedding invitations. They simply substituted the silver foil for the red!!
I wish them blessings as they start a life together and hope they will always celebrate the good of being together!!
Therese
Labels:
A2 cards,
die cuts,
embossing,
embossing folder,
hearts,
wedding invitation
Saturday, March 10, 2012
Embossed handmade paper
Just thought I would share with you how I made the embossed handmade paper I used on the leaf card on this posting.
I started with white paper pulp which is created using blank white paper (mostly partial sheets) from the printer and plain white cardstock scraps I collect from my paper crafting. Using my small mould and deckle I form a sheet and then place my embossing sheet over it with the design side down and couch as usual. In the process of eliminating as much water as possible from the newly made sheet it also gets embossed. I carefully remove the embossing sheets and leave the little embossed sheets to air dry. They are often a bit wavy once they are dry so I stack them and pressed them under weight - a stack of encyclopedias.
Here you can see one of the embossing sheets my sister and I created. We drew our images on a piece of paper, overlaid a small piece of handiwipe over each one and used hot glue to create the shapes onto the handiwipe!! The handmade paper does not stick to them and they can be reused.
It is a fun process with a very unique look. If you are thinking of making your own start with basic shapes made up of simple lines. The sky is the limit when it comes to subject matter!! Have fun!!
Therese
I started with white paper pulp which is created using blank white paper (mostly partial sheets) from the printer and plain white cardstock scraps I collect from my paper crafting. Using my small mould and deckle I form a sheet and then place my embossing sheet over it with the design side down and couch as usual. In the process of eliminating as much water as possible from the newly made sheet it also gets embossed. I carefully remove the embossing sheets and leave the little embossed sheets to air dry. They are often a bit wavy once they are dry so I stack them and pressed them under weight - a stack of encyclopedias.
Here you can see one of the embossing sheets my sister and I created. We drew our images on a piece of paper, overlaid a small piece of handiwipe over each one and used hot glue to create the shapes onto the handiwipe!! The handmade paper does not stick to them and they can be reused.
It is a fun process with a very unique look. If you are thinking of making your own start with basic shapes made up of simple lines. The sky is the limit when it comes to subject matter!! Have fun!!
Therese
Cards with calendar page art
This week we finished our calendars so I prepared cards kits for the students to work on for the last two classes.
Here are some of the cards I put together with pieces I had previously prepared for the art calendars. I was working with a 4.25" x 5.5" format so I simply trimmed their edges with decorative scissors and glued them to coordinating card fronts.
The embossed leaf was in my stash so I combined it with decorative paper and
coordinating cardstock then added a short piece of ribbon with a mini staple tocreate a card!!
We also played with shrink plastic which is always a hit with the students.
Therese
Here are some of the cards I put together with pieces I had previously prepared for the art calendars. I was working with a 4.25" x 5.5" format so I simply trimmed their edges with decorative scissors and glued them to coordinating card fronts.
The embossed leaf was in my stash so I combined it with decorative paper and
coordinating cardstock then added a short piece of ribbon with a mini staple tocreate a card!!
We also played with shrink plastic which is always a hit with the students.
Therese
Labels:
A2 cards,
brads,
cards,
embossed metal,
embossing,
embossing folder,
fibers,
glitter,
handmade paper,
postage stamps,
ribbon,
sequins,
staples
Thursday, March 08, 2012
Thank you cards
Created these cards for the girls who attended my Stampin UP party last week.
They feature the restructured paper I made a while back using owl postage, tissue paper, paper napkin and skeleton leaves!! I wanted to highlight the paper so I only added a small tag and some lace. I cut the tags using a Sizzix (SX) scallop tag die, stamped the greeting in black and sponged the edges. The card on the right features reused cardstock which was a Chapters gift card enclosure from years ago. Added a butterfly! To make the butterfly I stamped black cardstock with bleach using a butterfly stamp (SU), used the butterfly punch (SU) to cut them out and tied on some cording to create the body and antenna. I really like the look of making butterflies this way which I found somewhere on the internet. I will add a link when I recover it. I added some black lace seam binding in the hole and adhered it to the card front using 3D foam tape.
It is always fun having a party!! Catherine, my SU demo, always has fun make and takes and is always showing us some new technique or product. I have ordered CD cases this year in hopes of storing my unmounted stamps in a way that I can more easily access them.
Therese
They feature the restructured paper I made a while back using owl postage, tissue paper, paper napkin and skeleton leaves!! I wanted to highlight the paper so I only added a small tag and some lace. I cut the tags using a Sizzix (SX) scallop tag die, stamped the greeting in black and sponged the edges. The card on the right features reused cardstock which was a Chapters gift card enclosure from years ago. Added a butterfly! To make the butterfly I stamped black cardstock with bleach using a butterfly stamp (SU), used the butterfly punch (SU) to cut them out and tied on some cording to create the body and antenna. I really like the look of making butterflies this way which I found somewhere on the internet. I will add a link when I recover it. I added some black lace seam binding in the hole and adhered it to the card front using 3D foam tape.
It is always fun having a party!! Catherine, my SU demo, always has fun make and takes and is always showing us some new technique or product. I have ordered CD cases this year in hopes of storing my unmounted stamps in a way that I can more easily access them.
Therese
Labels:
A2 cards,
cards,
cording,
lace,
punchies,
restructured paper,
seam binding,
stamping,
SU - StampinUP,
SX - sizzix,
Tags
Wednesday, March 07, 2012
2012 calendar page



Here is a look at my completed calendar. It stands on its own though I have added holes at the top of each page so it can be hung. Yesterday, I realized that the bulk of it might prevent that from being effective so I added a cord hanger which is about 1.5" long (a loop through the holes in each page) so it can be easily hung.
These are the 12 pages of my second calendar which are not exactly the same as the previous pieces of art I have shared with you!!
These are the 12 pages of my second calendar which are not exactly the same as the previous pieces of art I have shared with you!!
A totally fun project!! We all need calendars to help us keep track of our lives so why not create
for ourselves a calendar worthy of looking at every day because it features our best art!!
for ourselves a calendar worthy of looking at every day because it features our best art!!
Therese
Monday, March 05, 2012
Embossed metal art
This piece of art features an embossed metal flower which the students created in this class. It is layered onto an embossed oval (NS), an embossed silver foil label (TH) and then layered onto a piece of my new restructured paper which I also embossed!!
I love the splash of colour created by the brads and the oval in contrast to the neutrals of the background and the glitz of the foil!!
This is the twelfth piece of art for the calendar so we will be putting it all together this week!! Everyone will be able to decide which piece of art will be featured on each month so their calendars will be unique.
It has been really fun to come up with the layouts for all of these little pieces of art.
Therese
I love the splash of colour created by the brads and the oval in contrast to the neutrals of the background and the glitz of the foil!!
This is the twelfth piece of art for the calendar so we will be putting it all together this week!! Everyone will be able to decide which piece of art will be featured on each month so their calendars will be unique.
It has been really fun to come up with the layouts for all of these little pieces of art.
Therese
Birdie art
I love the combination of the sheet music and the bird!! This piece of art uses one of the handmade paper sheets we made the first day which has a piece of sheet music layered onto it. I die cut the body of the little birds (TH) from colourful hand decorated wax crayon paper I had left over from one of my cards a few weeks ago. I layered it over a die cut of the whole bird cut from brown cardstock, added a brown wing with 3D foam tape and a tiny black brad for his eye. I layered the handmade paper over the embossed cardstock background, glued my bird into place and added three little black squares for accent. I really love the vibrant colours of this little bird.
Therese
Therese
Seed Paper Art
Another layout for the calendar! This one features a piece of seed paper which was created several years ago by students at a Art Festival. They have been sitting in a classroom and were recently returned to me so I decided to use them for this calendar project. The seed paper is created by forming a sheet of handmade paper, sprinkling on seeds and layering over them a thin piece of paper - in this case, the top layer of a paper napkin. The piece needed very little else so I just doodled a border using a fine tip Sharpie marker, glued my seed paper in place and added a fiber tie for a bit of texture.
Therese
Therese
Labels:
doodling,
fiber,
handmade paper,
paper napkins,
seed paper
Friday, March 02, 2012
Restructured paper
First read about restructured paper on The Gingerstamp Creations blog in an article written by Petra Berendson here! I thought it would be a perfect way to use up scraps to make paper for reusing in my art!! We all have papers we love and hate to see any of it go to waste. In this technique you can create a base of basic paper and then embellish it with any scraps you want to highlight.
I have been saving these newsletters that my sister gave me for a long time and even though they have been sitting I have not read all of them but they were much too beautiful to throw out
or recycle. So when I read this article I thought they would be the perfect candidates for my first attempt!! So I went through the pile, read four of them, tore out the articles I wanted to keep and ripped all the remaining pages into 9 pieces. It created quite a stack!!
To get started, I laid a large piece of plastic over my table, thinned some PVA glue and found a foam brush. The process is easy. Apply thinned glue to both sides of the paper scraps and lay them down on the plastic overlapping them all as you go. These are calligraphy guild newsletters so there is some
beautiful writing and great illustrations which created very interesting looking paper. I will be using some of this paper to create art for the calendar I am making with my group of young people so I resisted using colour and kept it neutral.
You can see in the top photo the wet restructured paper on the right and the loose pieces on the left. I can see really having fun with this process using all sorts of scraps.
For this piece of restructured paper I used graphics which were postage from printed envelopes which my sister gave me a few years ago. These were all owl images - over 50 or so - which I just glued in rows overlapping each other. It was a very strong graphic look and I wanted to tone it down some so I added strips of copper and kraft tissue paper, some less than perfect skeleton leaves and some layers of paper napkin that coordinated with the colours I already had. Everything is overlapping and completely soaked with the thinned glue which creates a new solid piece once it is dry. I dried the first one over night. The second one I did during the day and found that it took several hours(4-5 hours) to dry but that could vary with temperature and humidity.
I know I will be using this process again. It is very similar in the construction process as fabric paper which I did a while back. I really like the graphic look of the black and white paper I created and it will do perfectly for the calendar art I am planning. The coloured one is great as well and I already have a project in mind for it.
I love reusing paper scraps to create unique papers for my art which is why I recycle my scraps into handmade paper. This process is equivalent in that it reuses scraps as well as larger pieces and creates unique handmade papers for creating with. You can use old calendar pages, greeting cards, tissue paper, paper napkins, junk mail, handwritten letters, "mistakes", etc.
I hope you will be inspired to create your own restructured paper or to pass your scraps off to someone else who is interested in the process. You could arrange to swap scraps for unique handcrafted pieces of paper!!! This would be a fun process for doing as a group as well. Enjoy!! Let me know if you give this a try. I would love to see the paper you have created and the project you used it in.
Therese
I have been saving these newsletters that my sister gave me for a long time and even though they have been sitting I have not read all of them but they were much too beautiful to throw out
or recycle. So when I read this article I thought they would be the perfect candidates for my first attempt!! So I went through the pile, read four of them, tore out the articles I wanted to keep and ripped all the remaining pages into 9 pieces. It created quite a stack!!
To get started, I laid a large piece of plastic over my table, thinned some PVA glue and found a foam brush. The process is easy. Apply thinned glue to both sides of the paper scraps and lay them down on the plastic overlapping them all as you go. These are calligraphy guild newsletters so there is some
beautiful writing and great illustrations which created very interesting looking paper. I will be using some of this paper to create art for the calendar I am making with my group of young people so I resisted using colour and kept it neutral.
You can see in the top photo the wet restructured paper on the right and the loose pieces on the left. I can see really having fun with this process using all sorts of scraps.
For this piece of restructured paper I used graphics which were postage from printed envelopes which my sister gave me a few years ago. These were all owl images - over 50 or so - which I just glued in rows overlapping each other. It was a very strong graphic look and I wanted to tone it down some so I added strips of copper and kraft tissue paper, some less than perfect skeleton leaves and some layers of paper napkin that coordinated with the colours I already had. Everything is overlapping and completely soaked with the thinned glue which creates a new solid piece once it is dry. I dried the first one over night. The second one I did during the day and found that it took several hours(4-5 hours) to dry but that could vary with temperature and humidity.
I know I will be using this process again. It is very similar in the construction process as fabric paper which I did a while back. I really like the graphic look of the black and white paper I created and it will do perfectly for the calendar art I am planning. The coloured one is great as well and I already have a project in mind for it.
I love reusing paper scraps to create unique papers for my art which is why I recycle my scraps into handmade paper. This process is equivalent in that it reuses scraps as well as larger pieces and creates unique handmade papers for creating with. You can use old calendar pages, greeting cards, tissue paper, paper napkins, junk mail, handwritten letters, "mistakes", etc.
I hope you will be inspired to create your own restructured paper or to pass your scraps off to someone else who is interested in the process. You could arrange to swap scraps for unique handcrafted pieces of paper!!! This would be a fun process for doing as a group as well. Enjoy!! Let me know if you give this a try. I would love to see the paper you have created and the project you used it in.
Therese
Labels:
glue,
hand decorated paper,
handmade paper,
restructured paper,
reuse,
technique
Thursday, March 01, 2012
Zentangle shrink plastic charm
We created shrink plastic charms today! I had each student created a Zentangle design on their shrink plastic using a fine tip Sharpie marker. Once they were finished, they punched a hole in the top and used the heat gun to shrink them! They were all amazed at how much wiggling the shrink plastic does as it shrinks and how cool their designs looked reduced in size! We attached the charm to the cording and added it to our layered handmade paper sheets by punching holes and tying a double knot on the back. These were fairly time consuming but worth it because it is original art and a fun experience for the students!!
Therese
Therese
Stacked strips art
Yesterday, I had the students lay out the strips onto a quarter sheet of label then die cut them all last night so that today they could assemble their piece of art. We added a long piece of fiber which was wrapped around the die cut and a silk flower accent using 3D foam tape. Some of the students were quite creative with their layout of the strips which just exemplifies that we are all creative - we find so many possibilities even when we are all handed the very same supplies!! It is the part of teaching that I like the most - seeing others branch out and try something else!!
I used this same sketch for Christmas cards last fall. You can check them out here!!
Therese
I used this same sketch for Christmas cards last fall. You can check them out here!!
Therese
Labels:
die cuts,
embossing,
embossing folder,
fiber,
reuse,
silk flowers
Leaf artwork
Another quick and easy page for the calendar. Here we used the handmade paper sheet that had been layered with tissue paper. We simply added a leaf die cut (TH) that had a small piece of fiber tied to its stem. The students have been enjoying adding texture to their pieces using embossing folders in the Big Shot. I will be putting this one on my calendar page for October!!
Therese
Therese
Labels:
die cuts,
embossing,
embossing folder,
fiber,
handmade paper,
tissue paper
Flowers and newspaper art
Another piece for the calendar. We used one of the small sheets of handmade paper we created the first day. This one is layered with a small rectangle of newspaper. We added an embossed flower die cut, two punchies for the center of the flower, three little round punchies as accent and layered the whole element to an embossed quarter sheet of cardstock. These were nice and quick to do which is great because we have 12 pages to make in less than 8 classes.
Therese
Therese
Labels:
decorative paper,
die cuts,
embossing,
embossing folder,
handmade paper,
punchies
Packing tape transfer for art page
Another piece of art for the calendar!! We did some packing tape transfers for this piece which was really fun and new for this group of students. I created the ART graphic, printed it with my laser printer, applied the image side to the sticky side of a piece of packing tape and burnished it really well. Just before class I put them to soak so they would be ready as soon as class began. We simply removed them from the water, laid them packing tape down and started gently rubbing the paper with our fingers and the paper just started peeling off!! These are a really cool way to apply a printed image to a layout, journal page or any other surface.
NOTE: In response to a few emails about this technique I found a great tutorial online for this technique. You can check it out at Little Junk Shop!!
The students applied theirs to labels (ornamental - TH) cut from decorative cardstock and then trimmed the transfer to the edges of the die cut. We layered them onto shiny silver foil cardstock which we had embossed and added our little glittery hearts!!
This one is going to be the first page of my calendar!! Love art!!
Therese
NOTE: In response to a few emails about this technique I found a great tutorial online for this technique. You can check it out at Little Junk Shop!!
The students applied theirs to labels (ornamental - TH) cut from decorative cardstock and then trimmed the transfer to the edges of the die cut. We layered them onto shiny silver foil cardstock which we had embossed and added our little glittery hearts!!
This one is going to be the first page of my calendar!! Love art!!
Therese
Tuesday, February 28, 2012
Paper beads
I joined a Paper Bead swap on AFTCM and these are the beads I created! I used pages from a song book and ensured that the treble clef was at the end that would show. These are not quite a quarter inch around and 1.5" long. I used double sided tape and some black glitter embossing powder for the middle band of colour and black glitter for the ends. They each give a bit of a different look which I like. Once finished I coated them with a clear acrylic finish to seal them and make them a bit more durable. I used a rectangle of paper instead of a triangle which means that these beads are nice little cylinders instead of beads that are thick in the middle like these ones.
So they are packaged up and ready to be mailed off. Looking forward to seeing what comes back!! Maybe I will have a few more I can use as charms for my next bracelet which I am currently using as a decoration on one of my vases!!
Therese
So they are packaged up and ready to be mailed off. Looking forward to seeing what comes back!! Maybe I will have a few more I can use as charms for my next bracelet which I am currently using as a decoration on one of my vases!!
Therese
Labels:
3D embellishments,
beads,
charms,
sheet music,
thermal embossing
Friday, February 24, 2012
Postage stamp art
The last art piece for today features a cancelled postage stamp. I have a collection of old postage stamps which is a great resource when I am looking for little pieces of art for a project. This one is from a bird series and it reads 46 cents. How long has it been since we paid 46 cents for first class postage?? I dug out all the stamps I had from the series and chose those whose cancellation was the least conspicuous. I added them to coloured tags which I layered over handmade paper sheets that had a handmade paper layer (my own) glued to a quarter sheet of cardstock. I added a large brad through all the layers and tied on a short piece of coordinating fiber!!
That is number four and we have eight to go!!
Therese
That is number four and we have eight to go!!
Therese
Glittered elements
Today we played with glitter!! These are two more pieces of art which will be added to the calendar which I am creating with my class of young adults.
I layered double sided tape onto red cardstock and cut it with my Big Shot and a heart die (SX). I did both large ones and small ones. They used the large ones today on this piece of art and will be using the small ones later for a different page.
I added glitter to a plastic container which was big enough for them to place their shapes into which worked very well. This double sided tape is very sticky and we had difficulty removing the backing paper. I found it helpful to use a push pin to get it started on one side.
The die cut trees had a triangle of double sided tape added to the back which allowed us to rub glitter into its openings which immediately created a "decorated" tree!!
So for the first piece I embossed a quarter sheet of red cardstock, glued down a small sheet of layered handmade paper and then added a few staples where they would be hidden by the heart. I then added the heart using 3D foam tape. The students used their creativity and made their pages their own. It is one of the best things about teaching when students just do their own thing and show how many ways the same supplies can be combined to create art.
For the second piece, I peeled off the backing paper from the triangle I had added to the back of the tree for the glitter and placed it over the handmade paper layered with a book page. Glued that to the red embossed cardstock, pierced a hole through all the layers and added an embossed gold star sequin using a gold brad.
Two more pieces of art for our calendar!!
Therese
I layered double sided tape onto red cardstock and cut it with my Big Shot and a heart die (SX). I did both large ones and small ones. They used the large ones today on this piece of art and will be using the small ones later for a different page.
I added glitter to a plastic container which was big enough for them to place their shapes into which worked very well. This double sided tape is very sticky and we had difficulty removing the backing paper. I found it helpful to use a push pin to get it started on one side.
The die cut trees had a triangle of double sided tape added to the back which allowed us to rub glitter into its openings which immediately created a "decorated" tree!!
So for the first piece I embossed a quarter sheet of red cardstock, glued down a small sheet of layered handmade paper and then added a few staples where they would be hidden by the heart. I then added the heart using 3D foam tape. The students used their creativity and made their pages their own. It is one of the best things about teaching when students just do their own thing and show how many ways the same supplies can be combined to create art.
For the second piece, I peeled off the backing paper from the triangle I had added to the back of the tree for the glitter and placed it over the handmade paper layered with a book page. Glued that to the red embossed cardstock, pierced a hole through all the layers and added an embossed gold star sequin using a gold brad.
Two more pieces of art for our calendar!!
Therese
Labels:
3D foam tape,
book pages,
brads,
die cuts,
embossing,
gift wrap,
glitter,
handmade paper,
sequins,
SX - sizzix
Embossed metal art
Here is the first piece of art I designed for the calendar I am creating with my class of young adults. I provided them with several foil shapes and they embossed them with their own designs. For this page they embossed a design around a teal paper confetti flower. Embossing foil is easy. Simply place it upside down on a piece of folded newspaper to provide a bit of cushion and draw your design using a pencil. In this case, we confined our designs to the inside of a frame which I had already embossed with an embossing folder. We glued a small sheet of pink paper to a quarter sheet of teal paper and added our embossed metal art to the pink using 3D foam tape. We then added a rhinestone brad to the flower by piercing through all the layers. This will help to provide integrity to the whole piece when we add it to the calendar page.
Therese
Therese
White on White card with a twist!
They could be used for a wedding, anniversary, baptism, confirmation or first communion! I really like the look of the white on white!!
Therese
Handmade paper sheets with layers
Last week I taught papermaking to a class of young adults as part of an art program. I prepared ivory paper pulp - white post consumer paper scraps, yellow paper napkins and brown paper napkins. I gave them a variety of papers to layer onto their handmade paper while it was wet to create cute little sheets!! The tissue paper (stripes) and the mulberry paper were the only ones which did not peel off. The newspaper, book page, sheet music and gift wrap all had some areas that were lifting a bit when I was pressing them so I glued them back in place. It is really neat because the layers had created a debossed area in the handmade paper so it was very easy to position them back exactly where they had been!! I have also created this layered look using my own handmade paper and it incorporates easily to become part of the sheet.
Over the next few weeks we will be creating little pieces of art which will be incorporated into a calendar!
Therese
Over the next few weeks we will be creating little pieces of art which will be incorporated into a calendar!
Therese
Labels:
book pages,
gift wrap,
handmade paper,
sheet music,
tissue paper
Thursday, February 16, 2012
Cardmaking - February - Wax crayon & wall paper
I just love the vibrant colours of wax crayon backgrounds!! Here I used wax crayons over textured wallpaper!! Check out this post for more information!! It was a total blast to create these backgrounds and still more fun to choose images that would work well with them. The sailing ship is a digital image from CLKER and the cupcake is from Beccy`s Place. I wanted to keep the design simple to let the background shine so I simply added a length of rick rack and the coloured image. You can see the versatility of this medium - the top one makes a great masculine card and the bottom one with its circle greeting makes the cutest kids card.
I found this greeting in my greetings stash - applesauce containers that stack and store extra greetings by subject - birthday, thanks, etc. I bring them to class so participants can customize their cards.
I hope you will be inspired to create some backgrounds!! Make a few extra while you are at it and you will have what you need when you need a card in a hurry!!
Therese
I found this greeting in my greetings stash - applesauce containers that stack and store extra greetings by subject - birthday, thanks, etc. I bring them to class so participants can customize their cards.
I hope you will be inspired to create some backgrounds!! Make a few extra while you are at it and you will have what you need when you need a card in a hurry!!
Therese
Cardmaking - February - botanical bird
The decorative background on this card is sticky backed fabric which was designed for use in home decor. I have had it for a couple of years and have several times tried to incorporate it into my creations without success. This week it all just gelled and I created this design!! Because the fabric is sticky backed it is best to apply it like a large label. I peeled back just a small amount of the backing paper and positioned the top onto my card front ensuring it was straight and true. Once that little piece is properly positioned I was able to remove the backer paper easily off the rest of it and the whole piece settled nicely into place. Love the look of it!! I added a length of lace, tied some black cording around the card front over the lace and slipped the cardstock paper clip (SX) over it sliding it along until I was happy with the placement then anchored it with 3D foam tape. Glued the little bird (TH) to the paper clip and added it the wing with 3D foam tape. Used a white gel pen to add an eye. Stamped some script with grey Memories ink onto the fabric to add a bit of texture as some areas needed a bit of a boost.
Use what you have!! I know it is good advice but I can totally relate when in an effort to use what you have you seem to be hitting a road block and nothing is working!! I admit to moving on and trying something else because forcing the design process tends to be not an effective use of time for me, though having said that I am trying more and more to use what I have in an effort to reduce the stash!!
Therese
Use what you have!! I know it is good advice but I can totally relate when in an effort to use what you have you seem to be hitting a road block and nothing is working!! I admit to moving on and trying something else because forcing the design process tends to be not an effective use of time for me, though having said that I am trying more and more to use what I have in an effort to reduce the stash!!
Therese
Labels:
3D foam tape,
A2 cards,
Cardmaking,
cards,
die cuts,
fabric,
fabric lace,
fiber,
SX - sizzix,
Tim Holtz (TH)
Cardmaking - February - border punch tags
This card was inspired by my sister's border punch tags blog post! How cool that you can use a border punch to create cool little tags!! I used the eyelet border punch (SU) which makes tags that are five eighths of an inch wide. You can make them as long as you like. Follow the link above to check out her tutorial.
I created the greetings in my layout program and printed them before I punched the edge and cut them apart. Very cool!!
The images were downloaded from Meljen`s blog. She has a lot of beautiful whimsical images on her site!! I added some nice floral decorative paper and some coordinating ribbon to finish off my card. I watercoloured the images and added some stitching lines with a Sharpie marker. Coloured the tag too,tied it to the ribbon and positioned it with 3D foam tape.
Try making your own little tags!! Love being able to use a tool I own for more than one purpose!!
Therese
I created the greetings in my layout program and printed them before I punched the edge and cut them apart. Very cool!!
The images were downloaded from Meljen`s blog. She has a lot of beautiful whimsical images on her site!! I added some nice floral decorative paper and some coordinating ribbon to finish off my card. I watercoloured the images and added some stitching lines with a Sharpie marker. Coloured the tag too,tied it to the ribbon and positioned it with 3D foam tape.
Try making your own little tags!! Love being able to use a tool I own for more than one purpose!!
Therese
Cardmaking - February - with a Twist
After making this snowflake card with a twist I decided to add this design to my cardmaking session for February!! Love cards that move!!
I created it to fit in a #8 envelope by combining two pieces of cardstock that overlap in the back and create a flap on each end. The white cardstock flap on the right hand side features the twirling element and the coloured flap on the left features the greeting and extends to the fold on the right.
The twirling element is created by capturing a piece of crochet thread between two silver circle punchies using double sided tape being sure it is centered. I applied double sided tape above and below the punched opening, centered the twirling element in the opening and pressed the threads into the tape being sure the thread was taut. I added another piece of double sided tape over the threads and folded the ends over and adhered them to the double sided tape, respectively. This folding helps to ensure that the ends will remain captured and that the twirling element remains taut. Finish off the element by adhering confetti shapes to each side using double sided tape or glue dots. I added a double knotted ribbon to the decorative paper and adhered it over the glued threads. I trimmed my greeting and added it to the left hand side so the left flap would just tuck in slightly. Here is a link to a video tutorial I found that was helpful.
So, to get the twirling action, you twist your element, lay it flat on your card and tuck it into your envelope. When the recipient opens the card and lifts the flap the element twirls!!
The twirling element can be almost any size and shape so there is a lot of potential to make this card really fun!!
Enjoy!!
Therese
I created it to fit in a #8 envelope by combining two pieces of cardstock that overlap in the back and create a flap on each end. The white cardstock flap on the right hand side features the twirling element and the coloured flap on the left features the greeting and extends to the fold on the right.
The twirling element is created by capturing a piece of crochet thread between two silver circle punchies using double sided tape being sure it is centered. I applied double sided tape above and below the punched opening, centered the twirling element in the opening and pressed the threads into the tape being sure the thread was taut. I added another piece of double sided tape over the threads and folded the ends over and adhered them to the double sided tape, respectively. This folding helps to ensure that the ends will remain captured and that the twirling element remains taut. Finish off the element by adhering confetti shapes to each side using double sided tape or glue dots. I added a double knotted ribbon to the decorative paper and adhered it over the glued threads. I trimmed my greeting and added it to the left hand side so the left flap would just tuck in slightly. Here is a link to a video tutorial I found that was helpful.
So, to get the twirling action, you twist your element, lay it flat on your card and tuck it into your envelope. When the recipient opens the card and lifts the flap the element twirls!!
The twirling element can be almost any size and shape so there is a lot of potential to make this card really fun!!
Enjoy!!
Therese
Tuesday, February 14, 2012
Valentine's Day!!
Happy Valentine's Day!!
I have made up a Valentine's version of one of the cards I made up in January for my cardmaking class!!
The little clown is from The Graphics Fairy. I did remove the words on the graphic so it would work for this card! I laid it over vintage full scap attaching it with my own version of washi tape and added a vellum greeting sticker of my own making. I hope you will connect with your partner today and set aside some special time to celebrate all that is good about being together!!
Therese
Labels:
A2 cards,
cards,
colour printed images,
digital stamp,
vellum,
vintage photos,
washi tape
Monday, February 13, 2012
Wax crayon and wallpaper backgrounds
This card features a decorative background that I created using wall paper and wax crayons!! I read on Daphne's blog that she had used wax crayons on Anaglypta wallpaper for her cards so I thought I would give it a try!! I did not have the specialty wallpaper so I used what I had which was very textured in a very light colour. I cut the wall paper into pieces that would fit on my griddle (covered with foil) and just started applying wax crayon by rubbing them into the warmed paper. Too easy!! It was a very fun process and it created some really awesome backgrounds!! I created backgrounds using wax crayons and cardstock a while back. You can find them here!
So consider using what you have!! I will be scanning my backgrounds for future digital use!
I created this card for a Orange and Yellow Colour swap on Just Cards! The image is a digital stamp I downloaded from Michelle Perkett's blog. She has some very cool images on there!! I just watercoloured the laser printed image and mounted it over the rick rack using 3D foam tape. The greeting was laser printed on transparency, trimmed and adhered with discreetly placed double sided tape. A totally fun card!! It is already winging it's way to my swap partner!!
Therese
So consider using what you have!! I will be scanning my backgrounds for future digital use!
I created this card for a Orange and Yellow Colour swap on Just Cards! The image is a digital stamp I downloaded from Michelle Perkett's blog. She has some very cool images on there!! I just watercoloured the laser printed image and mounted it over the rick rack using 3D foam tape. The greeting was laser printed on transparency, trimmed and adhered with discreetly placed double sided tape. A totally fun card!! It is already winging it's way to my swap partner!!
Therese
Labels:
A2 cards,
cards,
digital stamp,
fiber,
hand decorated paper,
laser printing,
swap,
transparencies
Subscribe to:
Posts (Atom)














































